Cisco AIR-AP2802E-B-K9 Aironet AP2802E Wireless Gigabit Ethernet 2-Ports

Ports

The Cisco AP2802E Wireless Access Point is equipped with 2 ports, providing users with ample connectivity options. These ports play a crucial role in ensuring seamless communication and data transfer between the access point and other devices on the network. In this section, we will explore the benefits and importance of this feature in detail.

Cisco AIR-AP2802E-B-K9 Wireless Access Point Overview

General Information

• Manufacturer: Cisco
• Model Number: AIR-AP2802E-B-K9
• Product Type: Wireless Access Point

Technical Specifications

• Wireless Transmission Speed: 5.2 Gbps
• Wireless Standard: IEEE 802.11ac
• MIMO Technology: Yes
• Product Line: Aironet
• Product Series: 2800

Interface and Port Details

• Network (RJ-45) Ports: 2
• PoE (Power over Ethernet) Support: No
• VGA Port: No
• HDMI Port: No
• USB Port: No
• Management Port: Yes

Key Features

• Auto-sensing per device
• DFS (Dynamic Frequency Selection) support
• Cisco CleanAir technology for interference management
• Link Aggregation Control Protocol (LACP) enabled
• Maximum Ratio Combining (MRC) for signal quality
• 4T4R MIMO (Multiple Input, Multiple Output) technology
• Cyclic Shift Diversity (CSD) for improved performance
• Beamforming technology for better range and speed
• Packet aggregation (A-MPDU and A-MSDU) for higher efficiency
• Optimized Access Point Roaming for seamless connectivity
• Cross AP Noise Reduction
• MIMO equalization
• ClientLink 4.0 technology for enhanced client performance
• High-Density Experience (HDX) for crowded environments

Compliance Standards

• IEEE 802.11b
• IEEE 802.11a
• IEEE 802.11g
• IEEE 802.11n
• IEEE 802.11ac
• IEEE 802.3ad (LACP)

Enhanced Connectivity

The presence of 2 ports on the Cisco AP2802E offers enhanced connectivity options for users. These ports allow for the connection of multiple devices simultaneously, enabling seamless communication and data transfer. Whether you need to connect your access point to a switch, router, or other networking equipment, the availability of 2 ports ensures that you have sufficient connections to meet your requirements.

Increased Flexibility

Having multiple ports provides users with increased flexibility when it comes to network setup and configuration. With 2 ports at your disposal, you can easily create separate network segments or VLANs, allowing for better network management and security. Additionally, the availability of multiple ports allows for redundancy and load balancing, ensuring that your network remains stable and efficient even in high-demand situations.

Support for PoE+

The Cisco AP2802E features Power over Ethernet Plus (PoE+) support on both of its ports. This means that you can power the access point directly through the Ethernet cable, eliminating the need for a separate power source. PoE+ not only simplifies installation but also reduces cable clutter and saves on power consumption, making it a highly efficient and cost-effective solution.

Simplified Deployment

With 2 ports supporting PoE+, the Cisco AP2802E becomes an ideal choice for organizations looking for a simplified deployment process. By utilizing PoE+, you can easily deploy the access point in locations where power outlets are not readily available, such as ceilings or walls. This flexibility allows for greater freedom in positioning the access point for optimal coverage and performance.

Scalability

The availability of 2 ports on the Cisco AP2802E enables scalability, allowing you to expand your network as your needs grow. With the ability to connect multiple devices, you can seamlessly add more access points to your network without any hassle. This scalability ensures that your network remains future-proof and can easily accommodate increased user demand and data traffic.

Interface

The Cisco AP2802E Wireless Access Point features a Gigabit Ethernet interface, offering users high-speed connectivity and enhanced performance. In this section, we will delve into the benefits and importance of this feature in detail.

High-Speed Connectivity

The Gigabit Ethernet interface of the Cisco AP2802E allows for high-speed connectivity, enabling fast data transfer and communication between the access point and other network devices. With Gigabit Ethernet, you can take full advantage of your network's bandwidth, ensuring a smooth and efficient user experience. Whether you are streaming multimedia content or transferring large files, the Gigabit Ethernet interface ensures minimal latency and maximum throughput.

Improved Network Performance

By utilizing the Gigabit Ethernet interface, the Cisco AP2802E significantly improves overall network performance. The high-speed connectivity eliminates bottlenecks, allowing for faster data transmission and reduced network congestion. This results in improved response times, decreased latency, and enhanced user productivity. Whether you are running bandwidth-intensive applications or supporting a large number of simultaneous connections, the Gigabit Ethernet interface ensures that your network can handle the demands efficiently.

Future-Proof Solution

The inclusion of the Gigabit Ethernet interface in the Cisco AP2802E makes it a future-proof solution for your networking needs. Gigabit Ethernet has become the standard for modern networks, offering ample bandwidth to support the growing demands of today's applications and devices. By opting for an access point with a Gigabit Ethernet interface, you are ensuring that your network infrastructure is ready to handle the evolving technology landscape and the increasing data requirements of the future.

Ease of Integration

The Gigabit Ethernet interface provides seamless integration with existing network infrastructure. With compatibility across a wide range of switches, routers, and other networking equipment, the Cisco AP2802E can easily integrate into your current setup without any compatibility issues. This ease of integration ensures a smooth transition and minimizes downtime during installation or network upgrades.

Reliable Performance

Gigabit Ethernet offers reliable performance, ensuring that your network remains stable and consistent. The high-speed connectivity provided by the Gigabit Ethernet interface minimizes packet loss and ensures that data is delivered accurately and efficiently. This reliability is crucial for mission-critical applications, such as VoIP or video conferencing, where any interruption or delay can have significant consequences.

Part Number

The Cisco AP2802E Wireless Access Point has a unique part number – AIR-AP2802E-B-K9. This part number holds importance for users as it provides essential information about the access point and its specific configuration. In this section, we will explore the benefits and importance of this feature in detail.

Identification and Compatibility

The part number serves as a unique identifier for the Cisco AP2802E, allowing users to easily identify and differentiate it from other models or variants. This identification is particularly useful when ordering replacement parts or additional units for expansion. By providing the part number, you can ensure that you receive the correct access point with the desired configuration.

Configuration Details

The part number, AIR-AP2802E-B-K9, contains valuable configuration information about the Cisco AP2802E. It specifies the specific model, variant, and included features. This information is essential for users to understand the capabilities and compatibility of the access point with their existing network infrastructure. Whether it is determining the supported wireless standards or the available interfaces, the part number provides crucial details for informed decision-making.

Scalability and Expansion

The part number also plays a role in scalability and expansion. By referring to the part number, users can easily identify compatible units for expanding their network. Whether it is adding more access points to increase coverage or integrating additional features, having the correct part number ensures seamless integration and compatibility within your existing network infrastructure.

Warranty and Support

The part number can also provide information about warranty coverage and available support options for the Cisco AP2802E. By referencing the part number, users can determine if their access point is covered under warranty and what level of support is available. This information is crucial for ensuring prompt assistance in case of any issues or troubleshooting requirements.

Product Documentation

The part number often serves as a reference point for accessing product documentation and resources. Whether it is user manuals, configuration guides, or firmware downloads, knowing the part number allows users to quickly locate and access relevant documentation for their Cisco AP2802E. This helps in understanding the features and capabilities of the access point and assists in its optimal configuration and management.