Cisco C1200-24P-4G Catalyst 1200 24-Port Manageable Switch Poe 4 SFP Ethernet

Device Specifications

• Type: 24-Port Layer 3 Smart Switch
• Form Factor: Rack-mountable
• Networking Type: Gigabit Ethernet
• Port Configuration: 24 x 10/100/1000BASE-T + 4 x 10 Gigabit SFP
• Power Over Ethernet: PoE+ with a total budget of 195W

Performance Metrics

• Forwarding Rate: 41.66 Mpps (for 64-byte packets)
• Switching Capacity: 56 Gbps

Capacity Details

• MSTP Instances: 8
• PVST+ Instances: 126
• RPVST+ Instances: 126
• Link Aggregation Groups: 4
• Link Aggregation Ports: 8
• Active VLANs: 255
• IGMP Multicast Groups: 255
• IPv4 Routes (Static): 32
• IPv4 Interfaces: 16
• ACL Rules: 512
• Priority Queues: 8
• Packet Buffer Size: 1.5 MB

MAC Address Table

• Size: 8000 Entries

Frame Support

• Jumbo Frame Size: 9000 Bytes

Routing and Management Protocols

• Routing Protocols: IGMPv2, IGMP, Static IP Routing, IGMPv3, MLDPv2, MLDP, CIDR, MSTP, RSTP, STP, Bonjour
• Remote Management: SNMP, RMON, Telnet, SNMPv3, SNMPv2c, HTTP, HTTPS, TFTP, SSH, SSH-2, CLI, SCP, ICMP, DHCP, RADIUS, Syslog
• Encryption: SSL
• Authentication: RADIUS

Advanced Features

• BOOTp and DHCP Server Support
• VLAN and IGMP Snooping
• DoS Attack Prevention and Storm Control (Broadcast, Multicast, Unicast)
• Port Mirroring and Cable Diagnostics
• Fanless Design for Quiet Operation
• Energy-Efficient Ethernet (EEE) and Eco-Friendly Button
• Remote Firmware Upgrades and Zero-Touch Deployment
• Layer 3 Routing with Enhanced QoS
• Multiple VLAN and Security Features including Port Security and ACL Support

Compliance and Standards

• IEEE 802.3, IEEE 802.3u, IEEE 802.3z
• IEEE 802.1d, IEEE 802.1q, IEEE 802.3ab
• IEEE 802.1p, IEEE 802.3af, IEEE 802.3x
• IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x
• IEEE 802.1s, IEEE 802.1ab (LLDP), IEEE 802.3at
• IEEE 802.3az

Hardware Specifications

• Processor: X Arm, 1.4 GHz
• RAM: 1 GB DDR4 SDRAM
• Flash Memory: 512 MB
• Status Indicators: System, PoE, Link/Activity/Speed

Expansion and Connectivity

• Interfaces: 24 x 1000BASE-T RJ-45, 4 x 10GBASE-X SFP, 1 x Console RJ-45, 1 x USB-C Console

Power Requirements

• Power Device: Internal Power Supply
• Voltage Required: AC 100-240V (50 - 60 Hz)

Ports

The Cisco C1200-24P-4G Switch is equipped with 24 ports, making it an ideal choice for small to medium-sized businesses that require a reliable and efficient network solution. These ports allow for seamless connectivity and data transfer between devices, ensuring smooth operations and enhanced productivity.

Increased Connectivity

Having 24 ports means that users can connect multiple devices to the switch without the need for additional equipment. This allows for the expansion of the network infrastructure, accommodating the growing number of devices within the organization. With more ports available, businesses can easily add new devices, such as computers, printers, and IP phones, to their network without experiencing any bottlenecks or performance issues.

Furthermore, the 24 ports provide flexibility in terms of network design and layout. Users can create different VLANs (Virtual Local Area Networks) to segregate traffic and improve security. This feature is particularly beneficial in environments where sensitive data needs to be protected from unauthorized access.

Improved Data Transfer

The Cisco C1200-24P-4G Switch's 24 ports support high-speed data transfer rates, allowing for quick and efficient communication between devices. This is especially important in today's fast-paced business environment where large files and multimedia content are frequently transmitted over the network.

Whether it's transferring large files between servers, streaming high-definition videos, or conducting video conferences, the 24 ports ensure that data flows smoothly and without any latency issues. This enhances collaboration and productivity within the organization.

Scalability

The 24 ports on the Cisco C1200-24P-4G Switch provide scalability options for businesses that anticipate future growth. As organizations expand their operations or add more employees, having additional ports readily available ensures that the network can accommodate the increased demand without any disruptions.

With the ability to support a larger number of devices, businesses can easily adapt to changes in their workforce and technology requirements. This scalability feature minimizes the need for costly network upgrades or replacements, saving both time and money in the long run.

Management

The "Manageable" feature of the Cisco C1200-24P-4G Switch provides users with advanced network management capabilities, empowering them to have full control over their network infrastructure. This feature is particularly beneficial for IT administrators who need to monitor, configure, and troubleshoot the switch efficiently and effectively.

Centralized Network Control

With the "Manageable" feature, administrators can access a centralized management interface to configure and manage various aspects of the switch. They can set up VLANs, define access control policies, and implement Quality of Service (QoS) settings to prioritize critical applications or services.

This centralized control allows for streamlined network management, reducing the complexity of managing multiple individual devices. It also enables administrators to easily apply changes or updates across the network, ensuring consistency and adherence to security policies.

Enhanced Security

Network security is a top priority for businesses of all sizes. The "Manageable" feature of the Cisco C1200-24P-4G Switch offers advanced security capabilities that help protect sensitive data and prevent unauthorized access.

Administrators can implement features such as port security, which allows them to specify which devices are allowed to connect to specific ports. They can also enable MAC address filtering and implement authentication protocols such as 802.1X to ensure that only authorized devices can access the network.

Efficient Troubleshooting

In the event of network issues or performance degradation, the "Manageable" feature enables administrators to quickly identify and resolve problems. They can access detailed logs and statistics, monitor traffic patterns, and perform diagnostics to pinpoint the root cause of the issue.

With this level of visibility and control, administrators can take proactive measures to optimize network performance and minimize downtime. This ensures that employees have uninterrupted access to critical resources and applications, maximizing productivity within the organization.

Power Over Ethernet

The Cisco C1200-24P-4G Switch features Power over Ethernet (PoE) capability, which allows it to provide both data connectivity and electrical power to compatible devices over a single Ethernet cable. This feature eliminates the need for separate power adapters or electrical outlets, simplifying installation and reducing clutter.

Simplified Deployment

The PoE feature of the Cisco C1200-24P-4G Switch simplifies the deployment of network devices that require power, such as IP phones, wireless access points, and IP cameras. With PoE, these devices can be conveniently powered through the Ethernet cable, eliminating the need for additional power sources.

This makes it easier to install and relocate devices within the network infrastructure, as there is no longer a dependency on nearby electrical outlets. It also reduces cable clutter and improves aesthetics, creating a cleaner and more organized workspace.

Cost Savings

By utilizing PoE, businesses can save on infrastructure costs. Without the need for separate power outlets or adapters, there is no additional expenditure required for electrical wiring or power supply units. This is particularly beneficial in environments where adding new devices or expanding the network infrastructure is a frequent occurrence.

Additionally, PoE enables energy-efficient power management. The switch can intelligently allocate power based on device requirements, ensuring optimal energy usage and reducing electricity consumption. This not only contributes to cost savings but also aligns with sustainability initiatives.

Remote Power Management

With the PoE feature, administrators can remotely monitor and control the power supply to connected devices. They can easily turn devices on or off, or adjust power levels as needed. This allows for efficient power management and the ability to troubleshoot power-related issues without physically accessing the device.

Remote power management also offers convenience in scenarios where devices are located in hard-to-reach areas or in remote branch offices. Administrators can remotely reset devices or perform firmware updates, minimizing downtime and reducing the need for on-site technical support.

SFP Ports

The Cisco C1200-24P-4G Switch is equipped with 4 Small Form-factor Pluggable (SFP) ports. These ports provide flexibility in network connectivity options, allowing users to connect to fiber optic or other high-speed networking technologies.

Extended Reach

SFP ports enable connectivity over longer distances compared to traditional Ethernet ports. By using fiber optic cables, users can achieve greater reach without sacrificing data transfer speeds or experiencing signal degradation.

This is particularly useful in scenarios where devices are located in separate buildings or distant areas within a facility. It allows for seamless network expansion and ensures reliable connectivity, even in challenging environments.

High-Speed Connectivity

The SFP ports on the Cisco C1200-24P-4G Switch support high-speed networking technologies, such as Gigabit Ethernet or 10 Gigabit Ethernet. This enables users to take full advantage of faster data transfer rates and bandwidth-intensive applications.

Whether it's transferring large files, streaming high-definition videos, or running bandwidth-demanding applications, the SFP ports ensure that data flows smoothly and without any bottlenecks. This enhances productivity and user experience within the network.

Interoperability

SFP ports offer interoperability with various networking technologies, allowing users to mix and match different types of SFP modules based on their specific requirements. This flexibility enables seamless integration with existing network infrastructures and simplifies future upgrades or expansions.

For example, users can choose between single-mode or multi-mode fiber optic modules depending on the distance or bandwidth requirements. They can also select different SFP modules to connect to other networking equipment, such as routers or switches, ensuring compatibility and efficient data transmission.

Ethernet Ports

The Cisco C1200-24P-4G Switch features 24 Ethernet ports, enabling users to connect a wide range of devices to the network infrastructure. These ports provide reliable and high-speed connectivity for both data transfer and power delivery.

Seamless Connectivity

The 24 Ethernet ports on the Cisco C1200-24P-4G Switch allow users to connect devices such as computers, printers, servers, and IP phones directly to the network. This eliminates the need for additional switches or hubs, simplifying the network infrastructure and reducing points of failure.

With reliable connectivity, users can seamlessly access shared resources, communicate with colleagues, and collaborate on projects. Whether it's sending emails, transferring files, or participating in video conferences, the Ethernet ports ensure smooth communication and enhanced productivity.

Power Delivery

In addition to data transfer, the Ethernet ports support Power over Ethernet (PoE) functionality. This means that compatible devices, such as IP phones or wireless access points, can receive power directly from the switch through the Ethernet cable.

This eliminates the need for separate power adapters or electrical outlets, simplifying installation and reducing cable clutter. It also ensures that power is delivered efficiently and reliably to connected devices, minimizing downtime and optimizing network performance.

Easy Network Expansion

The 24 Ethernet ports provide scalability options for businesses that anticipate future growth or need to accommodate a larger number of devices. With additional ports readily available, users can easily expand their network infrastructure without the need for costly upgrades or replacements.

This flexibility allows businesses to adapt to changing technology requirements or workforce expansion, ensuring that the network can support the increased demand. It also future-proofs the network infrastructure, providing a solid foundation for future advancements in technology.

Name

The Cisco C1200-24P-4G Switch belongs to the Catalyst 1200 series, which is renowned for its reliability, performance, and advanced features. The name itself carries significance and highlights the quality and capabilities of this particular switch model.

Proven Track Record

The Catalyst 1200 series has a long history of delivering reliable and robust network solutions to businesses across various industries. Cisco, as a trusted brand in the networking industry, has earned a reputation for producing high-quality products that meet the needs of organizations of all sizes.

By choosing a switch from the Catalyst 1200 series, users can have confidence in its performance and reliability. This ensures that their network infrastructure operates smoothly and efficiently, minimizing downtime and maximizing productivity.

Advanced Features

The Catalyst 1200 series, including the Cisco C1200-24P-4G Switch, offers a wide range of advanced features that cater to the evolving needs of modern businesses. These features are designed to enhance security, improve performance, and simplify network management.

With features such as VLAN support, QoS capabilities, and advanced security protocols, users can effectively manage their network and protect sensitive data. The Catalyst 1200 series also provides scalability options, enabling businesses to easily expand their network infrastructure as their needs evolve.

Industry Recognition

The Catalyst 1200 series has received industry recognition and accolades for its innovation and excellence in network solutions. This further validates the importance and benefits of choosing a switch from this series.

By selecting the Cisco C1200-24P-4G Switch, users can leverage the expertise and experience of Cisco in delivering cutting-edge networking solutions. This ensures that they are investing in a reliable and future-proof product that meets their current and future networking requirements.