Dell 400-BFBZ 1.6TB SAS-12GBPS TLC SSD.

Interface: SAS-12GBPS

Improved Data Transfer Speed

The Dell 1.6TB Solid State Drive is equipped with a SAS-12GBPS interface, which offers significant improvements in data transfer speed compared to previous generations. With a maximum transfer rate of 12 gigabits per second, this interface ensures that you can quickly access and retrieve your data, allowing for faster application performance and reduced latency. Whether you are transferring large files, running intensive applications, or performing complex data analysis, the SAS-12GBPS interface provides the necessary bandwidth to handle demanding workloads with ease.

Enhanced Scalability and Flexibility

The SAS-12GBPS interface also offers enhanced scalability and flexibility. It allows for the connection of multiple drives in a daisy-chain configuration, enabling you to expand your storage capacity as needed without having to replace your existing drives. This flexibility is particularly beneficial for businesses and organizations that require large amounts of storage space or deal with rapidly growing data volumes. Additionally, the SAS-12GBPS interface supports hot swapping, allowing you to add or remove drives without powering down the system, ensuring uninterrupted operation and minimizing downtime.

Reliable Data Integrity

Another significant advantage of the SAS-12GBPS interface is its ability to ensure reliable data integrity. With features such as error detection and correction, this interface helps to prevent data corruption during transmission. It also supports advanced error recovery mechanisms, ensuring that any potential errors are quickly identified and rectified before they can impact your data. By using the SAS-12GBPS interface, you can have peace of mind knowing that your critical data is protected and that you can trust the integrity of your storage system.

Technology: TLC

Higher Storage Density

The Dell 1.6TB Solid State Drive utilizes Triple-Level Cell (TLC) technology, which offers higher storage density compared to other NAND flash memory technologies. With TLC, each memory cell can store three bits of data, allowing for more efficient use of the available space on the drive. This increased storage density translates to a higher capacity drive in a smaller physical form factor, making it an ideal choice for systems with limited space or those that require high storage capacity.

Cost-Effective Solution

TLC technology also provides a cost-effective storage solution. Due to its higher storage density, TLC drives offer a lower cost per gigabyte compared to other NAND flash memory technologies. This makes them an attractive option for budget-conscious users or organizations that need to deploy large-scale storage systems while keeping costs under control. With the Dell 1.6TB Solid State Drive, you can benefit from the cost savings offered by TLC technology without compromising on performance or reliability.

Optimized Performance

Despite being a cost-effective solution, TLC technology does not compromise on performance. The Dell 1.6TB Solid State Drive utilizes advanced controller algorithms and error correction mechanisms to ensure high-speed data read and write operations. It also incorporates wear-leveling techniques to distribute write operations evenly across the drive, preventing individual cells from wearing out faster than others. This optimization results in improved overall performance and longevity of the drive, ensuring that you can rely on it for demanding tasks and extended usage.

Use: Mix Use

Versatility for Mixed Workloads

The Dell 1.6TB Solid State Drive is designed for mix use, meaning it is optimized to handle a variety of workloads effectively. Whether you need to perform read-intensive tasks such as data analytics or write-intensive operations like database management, this drive can deliver the required performance. Its mix use capability makes it an ideal choice for environments where the workload varies or for applications that require a balance between read and write operations. With this drive, you can achieve a versatile storage solution capable of meeting the demands of diverse workloads.

Improved Application Performance

By utilizing mix use technology, the Dell 1.6TB Solid State Drive ensures improved application performance across different workloads. With its ability to handle both read and write operations efficiently, this drive can significantly reduce latency and response times. This means that your applications can run smoothly and responsively, providing a seamless user experience. Whether you are running intensive enterprise applications or performing real-time data processing, the mix use capability of this drive ensures that your system operates at peak performance.

Enhanced Endurance and Reliability

Mix use technology also enhances the endurance and reliability of the Dell 1.6TB Solid State Drive. With its optimized firmware and wear-leveling algorithms, this drive can evenly distribute write operations across the NAND flash memory cells, minimizing wear and extending the overall lifespan of the drive. This ensures that it can withstand heavy workloads over an extended period without compromising on performance or reliability. Whether you are using it in a high-demand enterprise environment or for personal use, you can rely on this drive to deliver consistent and reliable performance.

Hot Plug: 1

Easy Drive Installation and Removal

The Dell 1.6TB Solid State Drive features hot plug support, allowing for easy installation and removal of the drive without having to power down the system. This feature simplifies drive maintenance and upgrades, as you can quickly swap out drives while the system is still running. This is particularly useful in environments where system uptime is critical, as it minimizes downtime and ensures uninterrupted operation. Whether you need to replace a faulty drive or upgrade your storage capacity, the hot plug capability of this drive enables hassle-free drive management.

Reduced System Downtime

Hot plug support also helps to reduce system downtime. With the ability to hot swap drives, you can perform drive maintenance or upgrades without interrupting critical processes or shutting down the system. This is especially important for businesses and organizations that rely on continuous operations or have stringent uptime requirements. By minimizing system downtime, the hot plug feature of the Dell 1.6TB Solid State Drive allows you to maximize productivity and avoid costly disruptions to your workflow.

Flexibility for Drive Configuration

The hot plug capability of the Dell 1.6TB Solid State Drive provides flexibility in drive configuration. Whether you need to add or remove drives to adjust storage capacity or create a specific RAID configuration, this feature allows for easy customization without disrupting your system. It enables you to adapt your storage solution to meet changing requirements or to optimize performance and data redundancy. With the hot plug functionality, you can easily reconfigure your drives as needed, ensuring that your storage system remains flexible and adaptable.

Part Number: 400-BFBZ

Easy Identification and Compatibility

The part number 400-BFBZ uniquely identifies the Dell 1.6TB Solid State Drive, making it easy to identify and ensure compatibility with your system. This part number serves as a reference when searching for compatible hardware or when contacting support for assistance. By using the correct part number, you can avoid compatibility issues and ensure that the drive will work seamlessly with your existing infrastructure.

Efficient Inventory Management

The part number also plays a crucial role in efficient inventory management. By using standardized part numbers, organizations can easily track and manage their hardware assets. It simplifies the process of procurement, stock keeping, and asset management, ensuring that the right components are available when needed. With the 400-BFBZ part number, you can streamline your inventory management processes and maintain accurate records of your storage drives.

Warranty and Support

Using the correct part number is essential when it comes to warranty and support. By providing the 400-BFBZ part number to Dell or authorized service providers, you can ensure that you receive the appropriate warranty coverage and support for your specific drive model. This helps to expedite any necessary repairs or replacements and ensures that you can rely on comprehensive technical assistance whenever needed. Having accurate information about your drive's part number allows for smooth communication with support personnel, minimizing potential delays or misunderstandings.