P06579-001 HPE 800GB SSD SAS 12GBPS Mixed Use LFF MlC

HPE P06579-001 800GB SAS-12GBPS Mixed Use LFF SSD Overview

The HPE P06579-001 is a high-performance 800GB Solid State Drive designed for mixed-use workloads, offering reliability, speed, and efficient storage solutions for enterprise environments. Built with digitally signed firmware and Multi-Level Cell (MLC) NAND technology, this drive ensures data integrity while delivering exceptional throughput.

Key Specifications

• Manufacturer: HPE
• Part Number: P06579-001
• Drive Type: Hot-Swap SSD
• Interface: SAS 12GBPS
• Capacity: 800GB
• Form Factor: 3.5 inch LFF
• Workload Type: Mixed Use
• Bundled Component: HPE Low Profile Converter (LPC)

Advanced Performance Metrics

This HPE SSD is engineered for high-speed data access and robust endurance, suitable for enterprise applications requiring consistent performance under load.

• Random Read IOPS (4KiB, Q=16): 104,000
• Maximum Random Read IOPS (4KiB, Q=32): 165,000
• Random Write IOPS (4KiB, Q=16): 85,000
• Maximum Random Write IOPS (4KiB): 85,000@16
• Sequential Read Speed: 1,075 MB/s
• Sequential Write Speed: 1,030 MB/s
• Endurance (DWPD): 3
• 30-Day Writes: 4,380 GB

Power Efficiency & Consumption

Optimized for energy-conscious data centers, the HPE P06579-001 SSD maintains low power consumption without compromising performance.

• Idle Power: 4.26 W
• Random Read/Write: 4.97 W
• Sequential Read: 6.71 W
• Sequential Write: 6.95 W
• Maximum Power Draw: 6.71 W

Physical Dimensions

• Height: 22.23 cm
• Width: 18.41 cm
• Depth: 13.97 cm
• Weight: 1.36 kg
• Drive Height: 0.6 inch (15 mm)

Expansion & Connectivity

Designed for seamless integration, this SSD is compatible with standard 3.5" LFF bays and supports SAS 12 Gb/s interfaces.

• Single SAS 12 Gb/s interface
• Low-profile converter for flexible installation
• Hot-pluggable design for minimal downtime

Enterprise Compatibility

The HPE P06579-001 SSD is compatible with a wide range of HPE servers, making it ideal for scalable enterprise storage solutions.

HPE Apollo Series

• 4200 Gen10 (3.5 inch)
• 4200 Gen9 (3.5 inch)
• 4510 Gen9 (3.5 inch)

HPE ProLiant DL Series

• DL325 Gen10 (3.5 inch)
• DL325 Gen10 Entry / Performance / SMB Solution

HPE ProLiant ML Series

• ML110 Gen10 (3.5 inch) – Entry / Performance / Solution
• ML350 Gen10 (3.5 inch) – Base / Entry / Performance / Solution / Sub-Entry

HPE ProLiant XL Series

• XL170r Gen10 (3.5 inch)
• XL190r Gen10 (3.5 inch)

HPE P06579-001 800GB SAS-12GBPS Mixed Use LFF SSD

The HPE P06579-001 800GB SAS-12GBPS Mixed Use LFF (Large Form Factor) SSD represents a high-performance storage solution within the enterprise and data center storage category. Designed for demanding workloads, this solid-state drive combines exceptional reliability, speed, and durability, making it ideal for mixed-use applications that require consistent performance for both read-intensive and write-intensive tasks. The HPE P06579-001 SSD incorporates Multi-Level Cell (MLC) NAND flash technology, supports the SAS 12Gbps interface, and comes equipped with digitally signed firmware, ensuring data integrity and secure operation across diverse enterprise environments.

Technical Specifications and Storage Architecture

This category emphasizes enterprise-grade SAS SSDs with large form factors, designed for seamless integration into HPE storage arrays, ProLiant servers, and other compatible infrastructures. The HPE P06579-001 offers an 800GB capacity, providing a balance between high-capacity storage and low latency performance. The SAS 12Gbps interface delivers robust bandwidth for mixed workloads, supporting simultaneous read and write operations without sacrificing speed or reliability. Multi-Level Cell (MLC) NAND flash technology enables higher storage density while maintaining endurance suitable for mixed-use applications, striking a balance between cost efficiency and performance.

Mixed-Use SSD Applications and Performance

Mixed-use SSDs like the HPE P06579-001 are designed to handle a combination of random read and write workloads, making them ideal for database operations, virtualized environments, cloud infrastructure, and transactional applications. Unlike read-intensive drives that are optimized solely for retrieval operations, mixed-use SSDs maintain higher endurance and consistent performance under diverse workload patterns. With a 12Gbps SAS interface, these drives achieve low latency and high IOPS (Input/Output Operations Per Second), reducing bottlenecks in critical storage systems. This makes them suitable for enterprise-grade storage arrays and hybrid storage solutions that require rapid response times for both data processing and retrieval.

Firmware Security and Digital Signing

A key distinguishing feature of the HPE P06579-001 category is the digitally signed firmware. Firmware signing ensures that only authenticated and verified firmware versions are executed on the drive, protecting against malicious attacks or accidental corruption. This feature enhances the security posture of enterprise storage environments, providing administrators with confidence in the integrity and reliability of their SSDs. Digitally signed firmware also simplifies compliance management and aligns with IT security best practices, making it highly relevant for industries with strict regulatory requirements such as finance, healthcare, and government sectors.

Reliability, Endurance, and Data Integrity

Reliability is a cornerstone of this SSD category. HPE’s P06579-001 drive incorporates robust error correction mechanisms, wear leveling, and bad block management to extend drive lifespan and maintain consistent performance throughout its operational life. Endurance metrics are tailored to support mixed-use workloads, allowing frequent write operations without compromising data integrity. In addition, SAS protocol support enables dual-port configurations for redundancy, load balancing, and failover capabilities, ensuring that critical enterprise applications remain operational even in the event of drive failure.

Form Factor and Deployment Flexibility

The Large Form Factor (LFF) design of the HPE P06579-001 allows for ease of installation in standard 3.5-inch bays, which are widely used in enterprise server and storage chassis. This category supports hot-swappable capabilities, enabling administrators to replace or upgrade drives without disrupting system operations. The flexibility provided by LFF drives is particularly beneficial for data centers and storage arrays where scalability, maintenance, and serviceability are critical considerations. Enterprise IT teams can leverage these SSDs for tiered storage configurations, combining them with high-capacity HDDs to optimize cost, performance, and storage density.

Enterprise Compatibility and Integration

This category of HPE SSDs is engineered for seamless integration with HPE ProLiant servers, HPE BladeSystem enclosures, and HPE storage arrays such as the MSA and 3PAR families. Compatibility ensures that firmware updates, monitoring, and management tools are fully supported, enabling IT administrators to efficiently manage storage resources and maintain system health. Features such as predictive failure analysis, S.M.A.R.T. monitoring, and HPE Smart Storage Administrator support enhance visibility into drive performance, health status, and lifecycle management, which are essential for proactive storage administration in enterprise environments.

Power Efficiency and Thermal Management

Power consumption and heat generation are critical considerations in data center environments. The HPE P06579-001 SSD is engineered to operate efficiently, providing high performance while minimizing power usage and thermal output. Optimized thermal management ensures that drives maintain consistent performance under high workloads without thermal throttling, reducing the risk of overheating and hardware degradation. Energy-efficient operation contributes to lower operational costs and supports sustainable IT practices, which is increasingly important for modern data center strategies.

High Availability and Redundancy

High availability is a defining feature of enterprise-grade SSDs in this category. The HPE P06579-001 supports dual-port SAS connectivity, allowing for simultaneous access from multiple controllers or paths. This feature enhances redundancy, fault tolerance, and data availability, making it suitable for mission-critical applications where downtime is unacceptable. Coupled with enterprise RAID configurations, predictive analytics, and comprehensive monitoring tools, drives in this category contribute to resilient and reliable storage architectures capable of supporting 24/7 operations.

Use Cases and Workload Optimization

The mixed-use nature of the HPE P06579-001 SSD makes it suitable for a wide range of applications. Common use cases include virtualization workloads, database management systems, transactional processing, big data analytics, cloud computing environments, and high-performance computing clusters. The drive’s ability to handle both sequential and random I/O efficiently ensures that diverse applications receive predictable performance. By deploying these SSDs in tiered storage configurations or hybrid arrays, organizations can optimize workload placement, balancing cost, capacity, and performance requirements.

Scalability and Future-Proofing

Enterprises investing in the HPE P06579-001 category benefit from scalability and future-proofing. The 800GB capacity supports immediate storage needs while providing headroom for growth. LFF drives allow easy expansion in existing bays without the need for major infrastructure changes. The SAS 12Gbps interface ensures compatibility with future enterprise storage solutions, enabling organizations to adopt next-generation servers, storage arrays, and networking technologies without being constrained by legacy hardware limitations. Additionally, firmware updates and HPE’s support ecosystem ensure long-term reliability and performance optimization throughout the drive’s lifecycle.