HPE 813661-B21 10GB Ethernet 2Port 3.0 x8 535T PCI Express Adapter

Networking Adapter for Superior Performance - SKU# 813661-B21

Manufacturer Specifications

• Manufacturer: HPE
• Part Number (MPN): 813661-B21
• Spare Part Number: 815669-001
• Product Type: Networking Adapter
• Adapter Type: Ethernet 10Gb 2-Port 535T Adapter

Networking Features and Capabilities

• Network Processor: Broadcom BCM57416 (BCM957416A4160C)
• Data Transfer Rate: Dual ports with 20 GB bidirectional per port, totaling 40 GB bidirectional per adapter
• Bus Interface: PCIe 3.0 x8 for fast data transfer
• Form Factor: Stand-up design with both full-height and low-profile brackets included

Compliance with IEEE Standards

• 802.3ae
• 802.1Q
• 802.3x
• 802.1p
• 802.3ad
• 802.1AB
• 802.1Qbg
• 802.1Qbb

Enhanced Networking Capabilities

• Data Link Protocol: 10 Gbps Ethernet (10GIGE)
• Jumbo Frame Support: Up to 9600 KB

Expansion and Connectivity

• Expansion Slots: Two total slots, both available

Energy Efficiency and Power Requirements

• Maximum Power Consumption: 19.60 watts
• Typical Power Consumption: 14.64 watts

Product Dimensions & Weight

• Width: 9.84 inches
• Height: 8.46 inches
• Depth: 2.36 inches
• Weight: 0.635 lbs

Environmental Specifications

• Operating Temperature Range: 0°C to 55°C (32°F to 131°F)
• Storage Temperature Range: -65°C to 85°C (-85°F to 185°F)
• Operating Humidity: 10% to 90% non-condensing
• Non-Operating Humidity: 5% to 95% non-condensing

Server Compatibility

• Compatible with HPE ProLiant DL Series Servers (DL20 Gen10, DL120 Gen10, DL160 Gen10, DL180 Gen10, DL360 Gen10, DL380 Gen10, DL560 Gen10, DL580 Gen10, DL385 Gen10, DL325 Gen10)
• Supports HPE ProLiant ML Series (ML110 Gen10, ML30 Gen10, ML350 Gen10)
• Works with HPE Apollo 2000 (XL170r Gen10, XL190r Gen10)
• Optimized for HPE Apollo 4500 (XL450 Gen10)
• Compatible with HPE Apollo 6000 (XL230k Gen10)

Interface

The HPE 535T Network Adapter is equipped with a powerful PCI Express 3.0 x8 interface. This interface is designed to provide users with a high-speed and efficient connection between the network adapter and the server. With a bandwidth of up to 8 GT/s per lane, the PCI Express 3.0 x8 interface offers exceptional performance and reliability.

Benefits of PCI Express 3.0 x8 Interface

The PCI Express 3.0 x8 interface offers several benefits for users:

1. Increased Bandwidth

By utilizing eight lanes, the PCI Express 3.0 x8 interface provides increased bandwidth compared to lower lane configurations. This allows for faster data transfer rates, enabling users to handle large amounts of network traffic more efficiently.

2. Enhanced Performance

The higher bandwidth offered by the PCI Express 3.0 x8 interface translates into enhanced performance for the HPE 535T Network Adapter. Users can expect improved response times, reduced latency, and overall better network performance.

3. Future-Proofing

The PCI Express 3.0 x8 interface is designed to meet the demands of modern and future networking technologies. By investing in a network adapter with this interface, users can ensure compatibility with upcoming advancements in network speeds and protocols.

Importance of PCI Express 3.0 x8 Interface

The importance of the PCI Express 3.0 x8 interface cannot be overstated for users who require high-performance networking solutions.

1. Server Virtualization

In server virtualization environments, where multiple virtual machines are running concurrently on a single physical server, the PCI Express 3.0 x8 interface enables seamless communication between the network adapter and the virtual machines. This ensures that each virtual machine receives the necessary network resources without any performance bottlenecks.

2. Data-Intensive Applications

For users dealing with data-intensive applications, such as big data analytics or high-resolution media streaming, the PCI Express 3.0 x8 interface allows for faster data transmission and processing. This results in quicker data analysis, reduced waiting times, and improved overall productivity.

3. High-Speed Storage

The PCI Express 3.0 x8 interface is also beneficial for users utilizing high-speed storage solutions, such as solid-state drives (SSDs) or NVMe drives. These fast storage devices can fully leverage the bandwidth provided by the interface, enabling rapid access to stored data and reducing potential storage-related performance bottlenecks.

Ports

The HPE 535T Network Adapter features two ports, offering users flexible connectivity options and the ability to handle multiple network connections simultaneously.

Benefits of Two Ports

The inclusion of two ports in the HPE 535T Network Adapter brings several advantages to users:

1. Redundancy and Failover

Having two ports allows for redundancy and failover capabilities. In case one port or its corresponding network connection fails, the other port can seamlessly take over, ensuring uninterrupted network connectivity. This redundancy feature is crucial for critical systems that cannot afford downtime.

2. Load Balancing

With two ports, users can balance network traffic between them, distributing the load evenly across both ports. This load balancing capability optimizes network performance by preventing a single port from becoming overwhelmed with excessive traffic, resulting in a more efficient and reliable network connection.

3. Segmentation and Isolation

The presence of two ports allows users to segment and isolate network traffic to specific ports. This can be particularly useful in scenarios where different types of data or users require separate network connections, ensuring better security, control, and organization of network resources.

Importance of Two Ports

The inclusion of two ports in the HPE 535T Network Adapter holds significant importance for various networking scenarios:

1. Server Virtualization

In server virtualization environments, the two ports enable the creation of virtual networks and dedicated connections for different virtual machines. This segregation helps in optimizing network performance and enhancing security by isolating traffic between virtual machines.

2. Link Aggregation

For users requiring high-bandwidth connections, the HPE 535T Network Adapter's two ports can be combined using link aggregation techniques. This aggregation increases the overall bandwidth available to the server, enhancing network performance for bandwidth-intensive tasks such as file transfers or media streaming.

3. Network Redundancy

In critical network environments, having two ports provides redundancy and failover capabilities. By connecting each port to separate network switches or routers, users can ensure continuous network connectivity even in the event of a switch or router failure.

Speed

The HPE 535T Network Adapter supports 10GB Ethernet, enabling users to take advantage of high-speed networking capabilities.

Benefits of 10GB Ethernet

The adoption of 10GB Ethernet offers several benefits for users seeking faster and more efficient network connectivity:

1. Increased Network Performance

With 10GB Ethernet, users can experience significantly higher network speeds compared to traditional 1GB Ethernet. This increase in performance allows for faster data transfers, reduced network latency, and improved overall network responsiveness.

2. Handling Bandwidth-Intensive Applications

Applications that require substantial bandwidth, such as data centers, high-performance computing, or video editing, can greatly benefit from the increased speed offered by 10GB Ethernet. Users can process and transfer large amounts of data more quickly, leading to enhanced productivity and reduced waiting times.

3. Future-Proofing

As network demands continue to grow, the adoption of 10GB Ethernet ensures compatibility with future networking technologies and protocols. By investing in a network adapter that supports 10GB Ethernet, users can future-proof their infrastructure and avoid potential network bottlenecks as bandwidth requirements increase.

Importance of 10GB Ethernet

The importance of 10GB Ethernet cannot be overstated in today's data-driven world:

1. Data Centers

In data center environments, where large amounts of data need to be transferred rapidly between servers and storage devices, 10GB Ethernet is crucial for maintaining high-performance connectivity. It enables efficient communication between servers, facilitating tasks such as virtual machine migration or backup operations.

2. High-Resolution Media Streaming

For users involved in media production or streaming services, 10GB Ethernet ensures smooth playback of high-resolution content by providing the necessary bandwidth to handle the large file sizes associated with high-quality video and audio streams.

3. Collaboration and Remote Access

In collaborative work environments or scenarios where remote access is required, 10GB Ethernet enables fast and seamless collaboration by ensuring that users can access and share large files, documents, or applications quickly and efficiently.

Part Number

The HPE 535T Network Adapter has a specific part number, 813661-B21. This unique identifier is essential for users when ordering or searching for the network adapter.

Benefits of Part Number

Having a specific part number brings several benefits to users:

1. Easy Identification

The part number, 813661-B21, makes it easy for users to identify and differentiate the HPE 535T Network Adapter from other network adapters. This simplifies the ordering process and ensures that users receive the correct product.

2. Compatibility Assurance

By using the specific part number, users can ensure compatibility with their existing infrastructure or server models. The part number serves as a reliable reference point for compatibility checks, preventing compatibility issues or mismatches that could impact network performance.

3. Efficient Support and Maintenance

In case of technical issues or inquiries, providing the part number to support or maintenance personnel helps expedite the troubleshooting process. It allows them to quickly identify the exact product in question and provide accurate assistance or replacement services.

Importance of Part Number

The part number, 813661-B21, plays a vital role in simplifying product identification and ensuring compatibility:

1. Scalability and Expansion

For users planning to scale their network infrastructure or expand their server capabilities, knowing the specific part number is crucial. It enables them to seamlessly order additional HPE 535T Network Adapters that are identical to their existing ones, ensuring compatibility and simplifying network expansion.

2. Warranty and Support

During the warranty period or when seeking support, providing the part number helps streamline the process. It allows support personnel to quickly identify the product and validate warranty coverage, ensuring prompt resolution of any issues.

3. Documentation and Resources

When referring to product documentation, user guides, or online resources, knowing the part number enables users to access specific and accurate information related to the HPE 535T Network Adapter. This facilitates better understanding, configuration, and troubleshooting of the network adapter.