Cisco SG500X-48MP-K9-NA 48 Ports Manageable Layer 3 Switch.

General Overview of 48 Ports Switch

• Manufacturer: Cisco
• Part Number: SG500X-48MP-K9-NA
• Series: 500
• Product Type: Layer 3 Switch

Interface and Port Details

• Total Network Ports: 48
• Token Ring Port: Not Available
• LRE Port: Not Included
• Bypass: Not Supported
• Modular: No
• Management Port: Present
• USB Port: Absent
• PoE+ Ports (RJ-45): 48
• Stacking Ports: Included

Expansion Slots

• Gigabit Ethernet Ports: 48
• 10 Gigabit Ethernet Expansion Slots: 4

Performance Specifications

• Rack Unit Compatibility: 1U
• Mounting Options: Rack-Mountable, Desktop
• Media Type: Twisted Pair

Technology and Standards

• Twisted Pair Standard: Category 5
• Ethernet Technologies: 10 Gigabit Ethernet, Gigabit Ethernet
• Network Technologies: 10/100/1000Base-T, 10GBase-X
• MTBF (Mean Time Between Failures): 307,978 Hours

Expansion Capabilities

• Total Expansion Slots: 4
• Expansion Slot Type: SFP+
• Shared SFP Slots: Yes
• SFP+ Slots: 4

Environmental Specifications

• Minimum Operating Temperature: 32°F
• Maximum Operating Temperature: 122°F
• Operating Humidity Range: 10 – 90% (Non-Condensing)

Storage Conditions

• Minimum Storage Temperature: -4°F
• Maximum Storage Temperature: 158°F
• Storage Humidity Range: 10 – 90% (Non-Condensing)

Network and Communication

• Layer Supported: 3
• Routing Protocols: RIP-2, VRRP, Static IPv4 and IPv6 Routing, CIDR
• Remote Management Protocols: SNMP v1, v2c, v3, RMON (1, 2, 3, 9), Telnet, HTTP, HTTPS, SSH, CLI

Memory Specifications

• Standard Memory: 256 MB
• Flash Memory: 32 MB

Compliance and Standards

• IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.1ab (LLDP), IEEE 802.3at, IEEE 802.3az

Advanced Features

• Flow Control
• Layer 3 and Layer 2 Switching
• BOOTP and VLAN Support
• IGMP Snooping
• Syslog and DoS Attack Prevention
• Port Mirroring
• DiffServ and WRR Queuing
• Broadcast, Multicast, and Unicast Storm Control
• IPv6 Support
• Firmware Upgradeability
• SNTP Support
• Spanning Tree Protocol (STP) Variants (RSTP, MSTP)
• DHCP Snooping, TFTP Support
• Access Control Lists (ACLs)
• Quality of Service (QoS)
• Jumbo Frames and DHCP Server
• MLD Snooping, Dynamic ARP Inspection (DAI)
• STP Root Guard and Uni-Directional Link Detection (UDLD)
• DHCP Relay and IP-MAC Binding
• Energy Efficient Ethernet and Dynamic VLAN Support (GVRP)
• Class of Service (CoS), GARP, and GVRP
• DiffServ Code Point (DSCP) Support
• Four Fans
• 12MB Packet Buffer

Power Specifications

• PoE (RJ-45) Port: Yes
• Input Voltage: 120 V AC, 230 V AC
• Power Source: Power Supply
• Redundant Power Supply: Not Available

Dimensions and Weight

• Height: 1.7 Inches
• Width: 17.3 Inches
• Depth: 13.8 Inches
• Weight: 11.97 lbs

Ports

The Cisco SG500X-48MP-K9-NA Layer 3 Switch is equipped with an impressive total of 48 ports, making it an ideal choice for businesses and organizations that require a high-density network switch. These numerous ports offer exceptional flexibility and scalability, allowing users to connect multiple devices and expand their network effortlessly.

Enhanced Connectivity and Performance

With 48 ports available, this switch provides an extensive range of options for connecting various devices such as computers, servers, printers, IP phones, access points, and more. This level of connectivity is particularly advantageous in large-scale enterprises where multiple departments and teams rely on a robust network infrastructure to support their operations.

Moreover, the Cisco SG500X-48MP-K9-NA Layer 3 Switch offers Gigabit Ethernet connectivity on all 48 ports. This high-speed connection ensures rapid data transfer rates and low latency, resulting in enhanced performance and productivity for users. Whether it's transferring large files, streaming high-definition videos, or running bandwidth-intensive applications, this switch can handle the demands of modern businesses efficiently.

Power over Ethernet (PoE) Capabilities

In addition to the generous number of ports, this Cisco switch also features Power over Ethernet (PoE) capabilities. PoE technology enables the switch to deliver both power and data through a single Ethernet cable. With 48 Power over Ethernet (PoE) ports, users can conveniently power compatible devices directly from the switch without requiring separate power sources or additional cables.

This functionality is particularly beneficial in scenarios where devices are located in areas where power outlets are limited or inaccessible. For example, IP cameras, wireless access points, and IP phones can be easily connected and powered using PoE technology. This not only simplifies installation but also reduces clutter by eliminating the need for additional power adapters and cables.

Cost Savings and Flexibility

The inclusion of Power over Ethernet (PoE) capabilities in this switch offers significant cost savings for businesses. By eliminating the need for separate power sources and cables, organizations can reduce infrastructure costs and streamline their network setup. This becomes particularly relevant when deploying devices in areas with limited power infrastructure, such as warehouses, outdoor locations, or older buildings.

Additionally, PoE technology provides greater flexibility in terms of device placement. Users can position devices exactly where they are needed without being constrained by the proximity to power outlets. This flexibility allows for optimal network design, ensuring that devices are strategically placed for maximum efficiency and coverage.

Layer 3 Functionality

The Cisco SG500X-48MP-K9-NA Layer 3 Switch goes beyond basic Layer 2 switching capabilities by incorporating Layer 3 functionality. This means that the switch can perform routing functions, making it an integral part of a robust network infrastructure.

Enhanced Network Segmentation

Layer 3 functionality enables advanced network segmentation through the use of virtual LANs (VLANs) and IP subnets. By dividing the network into smaller segments, organizations can enhance security, improve performance, and simplify network management. VLANs allow for logical separation of devices and users, preventing unauthorized access and reducing the impact of potential security breaches.

Efficient Traffic Routing

With Layer 3 functionality, the Cisco SG500X-48MP-K9-NA switch can efficiently route traffic between different IP subnets. This enables organizations to optimize network performance by directing traffic through the most efficient paths. It also facilitates the implementation of Quality of Service (QoS) measures, ensuring that critical applications receive priority and bandwidth allocation is managed effectively.

Scalability and Future-proofing

The Layer 3 capability of this switch offers scalability for growing networks. As organizations expand and add more devices, the ability to segment the network and route traffic effectively becomes crucial. The Cisco SG500X-48MP-K9-NA Layer 3 Switch provides the necessary infrastructure to accommodate future growth, ensuring that the network remains efficient and manageable even as demands increase.

In conclusion, the Cisco SG500X-48MP-K9-NA Layer 3 Switch's 48 ports provide users with enhanced connectivity, flexibility, and scalability. The high-density port configuration allows for seamless integration of multiple devices, while the Power over Ethernet (PoE) functionality simplifies installation and reduces costs. Furthermore, the Layer 3 capabilities enable advanced network segmentation and efficient traffic routing, ensuring optimal performance and future-proofing for growing networks. With these features, this switch is an excellent choice for businesses and organizations seeking a reliable and versatile networking solution.