MEM-DR416L-CL07-ER32 Supermicro 16GB DDR4 SDRAM 3200MHz Pc4-25600 Ecc Registered Single Rank X4 RDIMM Memory Module

Supermicro 16GB DDR4 SDRAM Memory

The Supermicro MEM-DR416L-CL07-ER32 is a high-performance server memory module designed to deliver reliability, speed, and efficiency for enterprise-level computing environments.

General Information

• Brand: Supermicro
• Model Number: MEM-DR416L-CL07-ER32
• Type: 16GB DDR4 SDRAM Registered DIMM
• Configuration: Single Rank X4

Technical Specifications

Memory Capacity & Technology

• Storage Size: 16GB
• Technology: DDR4 SDRAM
• Module Count: 1 x 16GB

Performance Details

• Speed: 3200MHz (PC4-25600)
• Data Integrity: ECC (Error-Correcting Code)
• Signal Type: Registered
• Latency: CL22
• Rank: Single Rank (1Rx4)

Physical Characteristics

Form Factor

• 288-Pin RDIMM

Dimensions & Weight

• Height: 1.00 inch
• Depth: 6.75 inches
• Weight: 0.20 lb

MEM-DR416L-CL07-ER32 16GB DDR4 SDRAM DIMM RAM Overview

The Supermicro MEM-DR416L-CL07-ER32 16GB 3200MHz PC4-25600 ECC Registered DDR4 SDRAM memory module represents a critical component in modern server infrastructures where performance, stability, and reliability are non-negotiable. Designed specifically for enterprise-grade systems, this 288-pin RDIMM module delivers consistent throughput and optimized memory efficiency for data centers, virtualization environments, cloud computing platforms, and mission-critical applications. Its 16GB capacity combined with 3200MHz speed ensures that workloads demanding high bandwidth and low latency are handled seamlessly.

Understanding DDR4 Server Memory Architecture

DDR4 SDRAM technology has significantly evolved to meet the growing demands of enterprise computing. The Supermicro MEM-DR416L-CL07-ER32 module utilizes DDR4 architecture to provide improved data rates, reduced power consumption, and enhanced reliability compared to previous generations. Operating at 3200MHz, this module supports PC4-25600 standards, enabling faster data transfer rates that are essential for modern server workloads.

Registered DIMM technology plays a key role in maintaining signal integrity in systems with large memory capacities. By buffering command and address signals, RDIMMs reduce electrical load on the memory controller, allowing servers to support more modules without compromising stability. This makes the Supermicro MEM-DR416L-CL07-ER32 an ideal solution for high-density server environments where scalability is critical.

Advantages of ECC Registered Memory

Error-Correcting Code memory is essential in server environments where data integrity is paramount. The ECC functionality in this module automatically detects and corrects single-bit memory errors, significantly reducing the risk of data corruption. This feature is particularly valuable in applications such as financial systems, healthcare databases, and large-scale cloud platforms where even minor errors can lead to significant consequences.

The registered design further enhances stability by ensuring that memory signals are properly managed, which is especially important in multi-DIMM configurations. Together, ECC and registered buffering provide a robust memory solution that supports continuous operation and minimizes downtime.

CAS Latency and Performance Optimization

The CAS latency of 22 in the Supermicro MEM-DR416L-CL07-ER32 module represents a balanced approach between speed and reliability. While lower CAS latency typically indicates faster response times, enterprise memory modules often prioritize stability and consistency under heavy workloads. The CL22 latency ensures reliable performance across a wide range of applications without compromising data integrity.

Design and Build Characteristics of the 288-Pin RDIMM Module

The physical design of the Supermicro MEM-DR416L-CL07-ER32 adheres to industry-standard 288-pin DIMM specifications, ensuring compatibility with a wide range of server motherboards. The module is engineered for durability and efficient heat dissipation, which is crucial for maintaining performance in high-density server racks.

Its single rank x4 configuration provides an optimal balance between performance and compatibility. Single rank modules are often preferred in environments where lower latency and improved signal integrity are required. The x4 chip organization enhances ECC capabilities, enabling more effective error detection and correction compared to x8 configurations.

Thermal Efficiency and Power Consumption

Operating efficiently in demanding environments, this DDR4 module is designed with power optimization in mind. DDR4 technology inherently consumes less power compared to DDR3, contributing to reduced operational costs and improved energy efficiency in data centers. Lower voltage operation also results in less heat generation, which helps maintain system stability and prolongs the lifespan of hardware components.

Effective thermal management is essential in server environments where multiple components operate simultaneously. The Supermicro MEM-DR416L-CL07-ER32 module is built to withstand continuous operation under high loads, ensuring consistent performance even in thermally challenging conditions.

Compatibility with Server Platforms

This memory module is specifically designed for compatibility with Supermicro server systems and other enterprise-grade platforms that support DDR4 RDIMM memory. It integrates seamlessly with modern server architectures, including those based on Intel Xeon and AMD EPYC processors, which require reliable and high-performance memory solutions.

Before deployment, it is essential to verify compatibility with the target server motherboard and chipset. Factors such as supported memory speeds, maximum capacity, and RDIMM support must be considered to ensure optimal performance and system stability.

Key Benefits in Enterprise Applications

The 3200MHz speed of this memory module provides a significant boost in data throughput, allowing servers to handle more simultaneous tasks with improved efficiency. This is particularly beneficial in environments where multiple virtual machines or applications are running concurrently.

High-speed memory reduces bottlenecks and enhances overall system responsiveness, enabling faster data processing and improved user experiences. Whether used in database management systems, web hosting platforms, or enterprise resource planning applications, this module delivers consistent performance under heavy workloads.

Virtualization and Cloud Computing Efficiency

In virtualization environments, memory plays a critical role in determining the number of virtual machines that can be supported. The Supermicro MEM-DR416L-CL07-ER32 module provides the capacity and speed required to run multiple VMs efficiently, ensuring smooth operation and optimal resource utilization.

Cloud computing platforms also benefit from high-performance memory, as they rely on rapid data access and processing to deliver services to users. The reliability and scalability of this module make it an excellent choice for cloud infrastructure deployments.

Database and Analytics Workloads

Database systems and analytics applications require fast and reliable memory to process large volumes of data. The ECC functionality ensures data integrity, while the high-speed operation enables quick data retrieval and processing. This combination is essential for applications such as real-time analytics, business intelligence, and large-scale data warehousing.

High-Performance Computing Applications

High-performance computing environments demand memory solutions that can handle intensive computational tasks. The Supermicro MEM-DR416L-CL07-ER32 module is well-suited for HPC applications, providing the bandwidth and reliability needed for scientific simulations, engineering computations, and research workloads.