817085-001 HPE 1.92TB SSD SATA-6GBPS Read Intensive 3 SFF SC

Details of HPE 817085-001 SATA-6GBPS Read Intensive 1.92TB SSD Drive Overview

Manufacturer Details

• Brand: Hewlett Packard Enterprise (HPE)
• Model Number: 817085-001
• Drive Category: Hot-Swap Solid State Drive

Technical Specifications

Storage & Design

• Storage Capacity: 1.92 Terabytes
• Form Factor: 2.5-inch Small Form Factor (SFF)
• Interface Type: SATA III 6Gbps
• Flash Memory: Triple-Level Cell (TLC) NAND
• Plug Style: Hot-Pluggable
• Carrier Format: Smart Carrier (SC)
• Usage Profile: Read-Intensive Workloads
• Bundled Accessory: HPE SmartDrive Carrier
• Feature Highlight: Power Loss Safeguard
• Supported Platforms: HPE ProLiant Rack, Tower, BladeSystem, Synergy Servers
• Drive Height: 15 mm (0.60 inches)

Performance Metrics

• Endurance Rating: 0.8 DWPD (Drive Writes Per Day)
• Transfer Speed: 6 Gb/s
• Sequential Read Speed: 535 MiB/s
• Sequential Write Speed: 480 MiB/s
• Latency (Read): 115 µs (4KiB, Q1)
• Latency (Write): 50 µs (4KiB, Q1)
• Random Read IOPS: 63,000 (4KiB, Q16)
• Random Write IOPS: 20,000 (4KiB, Q16)
• Max Random Read IOPS: 75,000 (4KiB, Q32)
• Max Random Write IOPS: 20,000 (4KiB, Q1)
• Mixed IOPS (70% Read / 30% Write): 52,000 (Q32)
• Mixed IOPS (50% Read / 50% Write): 37,500 (Q32)

Connectivity & Expansion

• Interface Port: 1 x SATA 6Gb/s
• Drive Bay Compatibility: 2.5-inch SFF slot

Energy Efficiency

Power Usage Profile

• Idle Consumption: 1.29 Watts
• Random Read: 2.87 Watts
• Random Write: 2.87 Watts
• Sequential Read: 3.10 Watts
• Sequential Write: 3.98 Watts
• Mixed Read/Write: 2.87 Watts

Environmental Tolerance

• Minimum Operating Temperature: 32°F (0°C)
• Maximum Operating Temperature: 140°F (60°C)

System Compatibility

Supported HPE ProLiant DL Series

• DL160 Gen8 (Base, Entry, Performance)
• DL180 Gen9 (Base, Entry, Storage)
• DL20 Gen9 (Entry, Performance)
• DL320e Gen8/v2 (Base, Entry, Performance, Special Server)
• DL380 Gen9 (Base, Entry, Performance, High Performance)
• DL385p Gen8 (Entry, Storage, Consolidation, Dedicated Workload)
• DL580 Gen9 (Database, SAP HANA Scale-out/Scale-up)
• DL60 Gen9 (Base, Entry)
• DL80 Gen9 (Base, Entry)

Supported HPE ProLiant ML Series

• ML110 Gen9 (Base, Entry)
• ML150 Gen9 (Base, Entry, Performance)
• ML310e Gen8/v2 (Base, Entry, Performance)

Form Factor, Interface and Physical Characteristics

The HPE 817085-001 category adheres to the industry-standard 2.5-inch small form factor (SFF) footprint, facilitating dense server configurations and ease of replacement inside HPE Gen8 platforms. The interface specified is SATA-6Gbps, commonly referred to as SATA III, which provides broad compatibility across legacy and current enterprise motherboards and RAID controllers. The single connector (SC) 2.5-inch design enables hot-swap capability in supported backplanes, providing maintenance convenience for administrators. Physically compact yet capacious, a 1.92TB capacity in this form factor allows organizations to consolidate more usable storage per server bay while preserving airflow and thermal characteristics expected in rack-mounted systems.

Capacity and Deployment Density

With a 1.92TB nominal capacity, the HPE 817085-001 units deliver a strong capacity-to-slot ratio. This enables server and storage administrators to implement high-density configurations that reduce the number of nodes or enclosures required for a given dataset. In environments where rack space, power draw, and cooling are at a premium, selecting 1.92TB read-intensive SSDs allows for meaningful consolidation while still offering the read performance profile required by many modern server workloads. Capacity planning should always account for overhead such as RAID parity, thin provisioning, and snapshot destinations to ensure usable capacity meets operational needs.

Performance Characteristics and Real-World Expectations

When discussing performance for HPE 817085-001 1.92TB SSD SATA-6GBPS Read Intensive 3 SFF SC 2.5inch Gen8 drives, it is important to set realistic expectations tied to the SATA-6Gbps interface and the drive’s read-optimized nature. These drives are tuned to deliver consistent sequential and random read speeds and low latency under sustained read operations. In practical deployments they provide faster boot times, quicker application load times, and more consistent response for read-heavy database queries and large-file streaming. Performance in mixed or write-heavy workloads will be constrained by the endurance and firmware characteristics tuned toward reads, so administrators should align drive selection with observed I/O profiles to avoid premature wear or capacity-related performance degradation.

Latency and Throughput Considerations

Latency is a cornerstone metric for user experience and application responsiveness. HPE 817085-001 drives prioritize low read latency, which translates to improved response times for read-dominant database calls and cache hit scenarios. Throughput on SATA-6Gbps interfaces is also sufficient for many enterprise tasks, but architects should be mindful that flash-based NVMe solutions offer a higher raw bandwidth ceiling. The SATA-based HPE 817085-001 category remains valuable where compatibility, cost efficiency, and predictable read behavior outweigh the need for absolute top-tier peak throughput.

Reliability, Endurance and Enterprise Features

Reliability is central to any enterprise storage category. HPE 817085-001 drives are positioned with enterprise-class reliability features that support data center operations. Read-intensive classification usually implies the drive’s firmware and over-provisioning configurations are tailored for long-term stable reads with endurance expectations mapped to realistic write ceilings for their class. Enterprise features commonly present in this category include robust error correction, power-loss protection mechanisms to guard against data in transit during unexpected power events, and SMART reporting to allow proactive health monitoring. These attributes work together to reduce unplanned downtime and to facilitate predictable maintenance windows.

Monitoring, Diagnostics, and Firmware Management

Maintaining firmware currency and monitoring drive health are best practices for any deployment of HPE 817085-001 SSDs. HPE provides utilities and integrated management tools for Gen8 servers that surface SMART attributes, temperature statistics, and error counters so administrators can identify drives approaching end-of-life or experiencing abnormal conditions. Firmware updates may include performance improvements, bug fixes, and compatibility patches; therefore, careful scheduling of firmware maintenance is recommended to maintain a stable environment while benefitting from vendor-supplied enhancements. Driving an effective lifecycle management practice around firmware and diagnostics improves the mean time between failures and helps ensure continued alignment with service level objectives.

Compatibility and Integration with HPE Gen8 Systems

Compatibility is a primary reason organizations select drives by exact HPE part number. The HPE 817085-001 1.92TB SSD SATA-6GBPS Read Intensive 3 SFF SC 2.5inch Gen8 designation signals compatibility with HPE Gen8 server platforms, backplanes, and the firmware ecosystem tested by Hewlett Packard Enterprise. This compatibility extends to RAID controllers certified for Gen8 systems and hot-swap trays designed for the SFF footprint. Systems integrators and administrators benefit from reduced deployment friction when drives carry vendor-specific part numbers because the drives have been validated with the server BIOS, controller firmware, and management stacks typical of the HPE product family.

Cloud and Hybrid Deployments

For private cloud and hybrid cloud architects, the HPE 817085-001 category supports infrastructure tiers focused on read-heavy services and caching layers. These drives are suitable for backend nodes that serve as read caches for object stores or as primary storage for metadata repositories. In hybrid scenarios, the drives can be used in conjunction with higher-performance NVMe tiers to create intelligent storage hierarchies, where hot write operations are staged on faster media and read-heavy data is served from the 1.92TB SATA tier to control cost while preserving user experience.

Security, Data Integrity, and Sanitation

Security is not optional in enterprise storage. The HPE 817085-001 class of drives supports data integrity features common to enterprise SSDs, including robust ECC, SMART monitoring, and sometimes hardware-based data protection functions. For environments requiring cryptographic erase capabilities or self-encrypting drive features, validate support for these functions with the specific drive part number before assuming availability. Secure erase procedures should be part of routine decommission workflows so that any retired drive leaving the secure perimeter has been sanitized according to regulatory and organizational standards.