HPE Aruba JL262A 2930f 48G PoE+ 4SFP Switch 48 Ports Managed

Ports

The Aruba 2930f Switch is equipped with an impressive 48 ports, making it an ideal choice for businesses and organizations that require a high-density network. With this many ports available, users can connect multiple devices such as computers, servers, printers, and IP phones simultaneously without the need for additional switches or hubs.

General Overview of the HPE JL262A Managed Switch

• Manufacturer: Hewlett Packard Enterprise (HPE)
• Part Number : JL262A
• Product Category: Managed Switch

Technical Specifications

• Enclosure Format: Rack-Mountable, 1U size
• Port Configuration:
  • 48 x 10/100/1000 PoE+ ports
  • 4 x Gigabit SFP uplink ports

Performance Metrics

• Switching Capacity: 104 Gbps
• Throughput: 77.4 Mpps
• Latency (1 Gbps): 3.8 µs

Advanced Capacity

• Jumbo Frame Support: Up to 9220 bytes
• IPv4 Routing Table Entries: Up to 10,000
• IPv6 Routing Table Entries: Up to 5,000
• MAC Address Table Size: 32K entries

Networking Protocols

• Routing Protocols Supported:
  • OSPF (v2, v3), RIP (v1, v2), RIPng
  • IGMPv2, IGMPv3, MLD
  • Static IP Routing (IPv4 & IPv6)
  • CIDR
• Remote Management Protocols:
  • SNMP (v1, v2c, v3), RMON, Telnet, SSH (v1, v2), CLI, XRMON
• Security Encryption: MD5, SSL
• Authentication Methods: RADIUS, PAP, CHAP, TACACS, TACACS+

Networking Features

• Support for:
  • Flow Control, Full Duplex, VLAN, IGMP Snooping
  • Syslog, DHCP, BootP, ARP, QoS, DiffServ
  • IPv6, Spanning Tree Protocol (STP), MSTP
  • Access Control Lists (ACL), Jumbo Frames, LLDP
  • Uni-Directional Link Detection (UDLD), DHCP Relay, LACP
  • Dynamic ARP Protection, CPU Protection, OpenFlow
  • Neighbor Discovery Protocol (NDP), VXLAN, MIB II

Processor and Memory

• Processor: 1 x ARM Cortex-A9, 1.016 GHz
• RAM: 1 GB DDR3 SDRAM
• Flash Memory: 4 GB

Expansion and Connectivity

• Interfaces:
  • 48 x 1000BASE-T RJ-45 PoE+
  • 4 x Gigabit LAN SFP
  • 1 x Serial (Console)
• Expansion Slots: 1 total / 1 free slot available
• Installed Modules: 0 (installed) / 4 (maximum)

Power and Energy Efficiency

• Internal Power Supply
• Power Provided: 459 Watts
• Power Consumption (Operational): 48.6 Watts
• Required Voltage: AC 120/230 V (50/60 Hz)

Increased Connectivity

The 48 ports on the Aruba 2930f Switch provide users with increased connectivity options. This means that users can easily expand their network without any limitations. Whether you are setting up a small office or a large enterprise, having 48 ports allows you to connect all your devices seamlessly.

Efficient Data Transfer

With 48 ports, the Aruba 2930f Switch ensures efficient data transfer between devices. Each port is capable of transferring data at high speeds, ensuring that your network runs smoothly and without any bottlenecks. Whether you are transferring large files or streaming multimedia content, the 48 ports provide the necessary bandwidth to handle heavy data traffic.

Scalability

The 48 ports on the Aruba 2930f Switch offer scalability for future growth. As your business expands and more devices are added to your network, having extra ports ensures that you can accommodate the increased demand without any hassle. This scalability feature saves you from investing in additional network equipment and allows for a seamless transition as your business grows.

Power Over Ethernet

One of the standout features of the Aruba 2930f Switch is its Power over Ethernet (PoE) capability. With PoE, the switch can deliver power to connected devices through the Ethernet cables, eliminating the need for separate power cables and adapters.

Simplified Installation

The PoE feature simplifies the installation process by reducing cable clutter and eliminating the need for multiple power outlets. This makes it easier to set up devices such as IP phones, wireless access points, and security cameras in locations where power outlets may be limited or inaccessible. With PoE, you can deploy devices in a more flexible and efficient manner.

Cost Savings

By utilizing the PoE feature of the Aruba 2930f Switch, you can save on installation and maintenance costs. With PoE, there is no need to hire an electrician to install additional power outlets, reducing installation expenses. Additionally, PoE allows for centralized power management, enabling you to monitor and control power usage, leading to energy savings and lower electricity bills.

Flexibility and Mobility

The PoE feature of the Aruba 2930f Switch provides flexibility and mobility for connected devices. With power delivered over Ethernet cables, devices can be easily moved or relocated without the need for rewiring or disrupting the network. This flexibility allows for easier reconfiguration of your network layout and ensures that devices can be positioned in optimal locations for better performance.

SFP Ports

The Aruba 2930f Switch comes equipped with 4 SFP (Small Form-Factor Pluggable) ports. These ports allow for high-speed connections over fiber optic cables, providing users with enhanced performance and reliability.

Extended Network Reach

The SFP ports on the Aruba 2930f Switch enable connections over long distances using fiber optic cables. This allows you to extend your network reach beyond the limitations of traditional copper Ethernet cables. Whether you need to connect devices in different buildings or across large campuses, the SFP ports provide the necessary connectivity for seamless communication.

High Bandwidth Capabilities

The SFP ports support high bandwidth capabilities, making them ideal for applications that require large data transfers or high-speed connectivity. Whether you are transferring large files, streaming high-definition video, or running bandwidth-intensive applications, the SFP ports ensure that your network can handle the demands without any degradation in performance.

Improved Reliability

Fiber optic cables used with SFP ports offer superior reliability compared to copper Ethernet cables. They are immune to electromagnetic interference and provide better resistance to environmental factors such as moisture and temperature fluctuations. By utilizing the SFP ports, you can ensure a stable and reliable network connection, minimizing downtime and improving overall network performance.

Management Type

The Aruba 2930f Switch is a managed switch, providing users with advanced management capabilities to monitor and control their network.

Enhanced Network Control

As a managed switch, the Aruba 2930f provides enhanced network control features such as VLAN (Virtual Local Area Network) support, Quality of Service (QoS) prioritization, and advanced security options. These features allow administrators to optimize network performance, allocate bandwidth effectively, and ensure the security of their network.

Network Monitoring and Troubleshooting

Managed switches offer comprehensive network monitoring and troubleshooting capabilities. With features such as port mirroring, traffic monitoring, and error reporting, administrators can easily identify and resolve network issues. This proactive approach helps in maintaining a stable network environment and minimizing potential downtime.

Scalability and Future-Proofing

A managed switch like the Aruba 2930f offers scalability and future-proofing for your network infrastructure. With features like link aggregation, spanning tree protocol, and virtual stacking, you can easily expand your network without disrupting existing connections. Managed switches also support firmware updates and feature enhancements, ensuring that your network remains up-to-date with the latest advancements in technology.

Mounting Options

The Aruba 2930f Switch is rack-mountable, providing users with a convenient and space-saving solution for network deployment.

Space Efficiency

Rack-mountable switches are designed to fit into standard server racks, allowing for efficient use of space in data centers or server rooms. By mounting the switch on a rack, you can consolidate your network equipment and minimize clutter. This not only saves physical space but also improves airflow and cooling, leading to better overall system performance.

Ease of Installation and Maintenance

Rack-mountable switches are designed for easy installation and maintenance. They typically feature a modular design with removable components, making it simple to add or replace modules as needed. Additionally, rack-mounted switches often have cable management features that help organize and secure cables, reducing the risk of accidental disconnections or cable damage.

Scalability and Flexibility

Rack-mountable switches offer scalability and flexibility for network expansion. As your network grows, you can easily add more switches to the rack without the need for additional infrastructure. This scalability allows for a seamless transition and ensures that your network can adapt to changing business requirements.

Manufacturer

The Aruba 2930f Switch is manufactured by HPE (Hewlett Packard Enterprise), a renowned company known for its high-quality networking equipment.

Reliability and Quality

HPE has a reputation for producing reliable and high-quality networking products. The Aruba 2930f Switch is built with robust hardware components and undergoes rigorous testing to ensure its reliability and performance. By choosing a switch from a reputable manufacturer like HPE, you can be confident in the quality and longevity of your network infrastructure.

Industry Expertise

HPE has extensive industry expertise in networking solutions. With years of experience, they understand the unique challenges and requirements of different industries. This expertise is reflected in the design and features of their networking products, ensuring that they meet the specific needs of various businesses and organizations.

Customer Support and Warranty

HPE provides excellent customer support and warranty coverage for their networking products. In the event of any issues or concerns, their dedicated support team is readily available to assist you. Additionally, HPE offers warranty coverage to protect your investment and provide peace of mind. Knowing that you have reliable support and warranty coverage can help you focus on your business without worrying about network disruptions.

Part Number

The Aruba 2930f Switch has the part number JL262A, which uniquely identifies this specific model.

Easy Identification

The part number JL262A allows for easy identification of the Aruba 2930f Switch. Whether you are purchasing additional switches or seeking technical assistance, providing the part number ensures that you are referring to the correct model. This simplifies communication and ensures that you receive the appropriate products or support.

Compatibility

The part number JL262A also indicates compatibility with other Aruba 2930f Switch models and accessories. When expanding or upgrading your network, it is crucial to ensure compatibility between different components. By using the correct part number, you can be confident that your new switch or accessory will seamlessly integrate with your existing network infrastructure.

Product Specifications

The part number JL262A is associated with specific product specifications for the Aruba 2930f Switch. These specifications include details such as the number of ports, power requirements, dimensions, and supported features. By referring to the part number, you can quickly access the relevant specifications to ensure that they meet your specific requirements and expectations.