P07190-K21 HPE 960GB NVME SFF SSD

HPE P07190-K21 960GB NVMe Solid State Drive Overview

The HPE P07190-K21 delivers exceptional performance for enterprise storage environments, combining high-speed NVMe technology with reliability and efficiency. Engineered for read-intensive workloads, this 960GB SFF SSD is ideal for HPE ProLiant servers, offering a compact 2.5-inch form factor and hot-swappable design.

Key Features and Specifications

• Manufacturer: HPE
• Part Number: P07190-K21
• Drive Type: Solid State Drive (SSD)
• Capacity: 960GB NVMe
• Form Factor: 2.5" Small Form Factor (SFF)
• Interface: NVMe U.2 PCIe
• Hot-Pluggable: Yes, supports easy replacement without system downtime
• Carrier: HPE Smart Carrier NVMe (SCN)
• Workload Optimization: Read-intensive operations
• Firmware Security: Digitally Signed (DS) for added protection
• Server Compatibility: HPE ProLiant Rack, Tower, BladeSystem Servers, and Synergy platforms
• Height: 15mm (0.60 inch)

Performance Metrics

• Endurance: 1 DWPD (Drive Writes Per Day)
• 30-Day Write Capacity: 1,750 TB
• Random Read IOPS (4KiB, Q=16): 118,000
• Random Write IOPS (4KiB, Q=16): 59,000
• Maximum Random Read IOPS (4KiB, Q=256): 370,000
• Maximum Random Write IOPS (4KiB, Q=16): 59,000

Power and Efficiency

• Maximum Power Consumption: 8.72 Watts
• Energy-efficient design for reduced operational costs

Environmental Conditions

• Operating Temperature Range: 32°F to 140°F
• Optimized for reliable performance under standard data center conditions

Connectivity and Expansion

• Interface: Single PCIe NVMe connection
• Compatible Bay: 2.5" SFF slot

Server Compatibility

HPE ProLiant BL Series

• BL460c Gen10 (2.5 inch)

HPE ProLiant DL Series

• DL325 Gen10, DL325 Gen10 Base, Entry, Performance, SMB Solution, Solution
• DL360 Gen10 variants including Base, Entry, High Performance, Network Choice, Remote Office Branch Office for Cohesity DataPlatform, SMB
• DL380 Gen10 series: Base, Entry, Entry SMB, High Performance, Hybrid Server for Datera, Network Choice, NVMe All Flash for Datera, Performance, SMB Networking Choice, Solution
• DL385 Gen10: Base, Entry, High-Performance, Performance, SMB, Solution
• DL388 Gen10
• DL560 Gen10: Base, Entry, Performance
• DL580 Gen10: Base, Entry, Performance

HPE ProLiant ML Series

• ML350 Gen10: Base, Entry, High Performance, Performance, SMB, Solution, Special Server, Sub-Entry (2.5 inch)

HPE P07190-K21 960GB NVMe SFF Read Intensive Solid State Drive

The HPE P07190-K21 960GB NVMe SFF Digitally Signed PCIe Read Intensive Solid State Drive belongs to a category of enterprise-grade SSDs specifically optimized for read-heavy workloads. This category focuses on high-speed NVMe storage solutions that deliver exceptional read performance, low latency, and consistent throughput for mission-critical applications such as database querying, virtualization, content delivery, analytics, and large-scale data retrieval environments. Featuring HPE’s digitally signed firmware, these drives ensure secure and reliable operation within HPE server and storage ecosystems, minimizing the risk of firmware corruption or unauthorized updates.

Technical specifications and NVMe interface benefits

Drives in this category leverage the PCIe NVMe interface to provide superior bandwidth and low-latency data access compared to traditional SAS or SATA interfaces. The HPE P07190-K21 960GB SSD supports multiple PCIe lanes, enabling faster data transfer rates and enhanced IOPS performance, which is critical for read-intensive workloads. With its 2.5-inch small form factor (SFF), the drive allows for high-density storage deployment, making it ideal for rack-mounted servers, storage arrays, and hyper-converged infrastructure setups where space optimization is crucial. The combination of NVMe protocol and enterprise-class hardware ensures deterministic performance for workloads that require frequent and consistent read operations.

Read-intensive optimization and workload focus

This category is purpose-built for applications dominated by read operations rather than write-heavy tasks. Read-intensive SSDs such as the HPE P07190-K21 are optimized to deliver maximum read throughput while maintaining predictable performance and endurance over the life of the drive. Common use cases include online transaction processing (OLTP) systems, virtual desktop infrastructure (VDI), database indexing, web content delivery, caching layers, and analytical workloads. By prioritizing read performance, these SSDs help organizations achieve faster data access, reduced latency, and improved application responsiveness, especially under heavy read workloads.

Digitally signed firmware and security features

Security and integrity are central to this SSD category. HPE’s digitally signed firmware ensures that each drive’s firmware has been verified for authenticity and integrity before operation, preventing unauthorized or malicious modifications. This provides IT administrators with confidence that the drives will operate reliably and securely within enterprise environments. Additionally, the drives can support self-encrypting drive (SED) features, secure erase, and compliance with enterprise encryption standards, further enhancing data protection and meeting regulatory requirements for sensitive workloads.

Performance characteristics and latency optimization

HPE P07190-K21 SSDs are engineered to deliver consistent read performance with minimal latency, ensuring that applications experience deterministic response times even during peak workloads. Leveraging advanced NAND flash memory, enterprise-grade controllers, and optimized firmware, read-intensive NVMe SSDs achieve high Input/Output Operations Per Second (IOPS) and throughput. This ensures that critical applications, including real-time analytics, database queries, and content delivery systems, operate efficiently without experiencing delays caused by storage bottlenecks.

Reliability, endurance, and data protection

Enterprise read-intensive SSDs are built for durability and long-term reliability. The HPE P07190-K21 features advanced error correction code (ECC), wear-leveling algorithms, and power-loss protection to safeguard data integrity during unexpected outages. While optimized for read-heavy workloads, these drives provide sufficient write endurance to accommodate regular enterprise operations. By combining hardware reliability with software-based predictive monitoring, this SSD category enables organizations to maintain high availability, minimize downtime, and ensure consistent system performance throughout the life of the drive.

Integration with HPE server and storage ecosystems

HPE read-intensive NVMe SSDs are fully compatible with HPE ProLiant servers, storage arrays, and management platforms such as HPE OneView and Smart Storage Administrator. Integration with these ecosystems allows IT administrators to centrally monitor drive health, performance metrics, and firmware status, while leveraging predictive analytics to anticipate potential failures before they impact operations. Seamless integration reduces management overhead, improves operational efficiency, and ensures that read-intensive workloads are reliably supported across enterprise deployments.

Scalability and density considerations

The 2.5-inch SFF form factor enables high-density storage deployments, allowing multiple drives to be installed within server chassis or storage arrays while maximizing usable capacity. This is particularly important for environments where read-intensive workloads demand fast access to large datasets. Organizations can deploy multiple NVMe read-intensive SSDs to create high-performance storage pools, ensuring predictable, low-latency access to frequently read data. Proper planning for thermal management, power allocation, and drive placement helps maintain consistent performance across densely populated configurations.

Power efficiency and thermal management

Read-intensive NVMe SSDs are designed to deliver high performance while minimizing energy consumption. The HPE P07190-K21 reduces heat output compared to higher-power write-intensive counterparts, improving cooling efficiency and lowering operational costs. Efficient thermal management ensures that the drives operate within optimal temperature ranges, extending their lifespan and maintaining consistent performance. Enterprises benefit from reduced energy usage, lower cooling requirements, and environmentally sustainable data center operations when deploying these SSDs at scale.

Security and compliance features

This SSD category emphasizes enterprise-grade security features, including digitally signed firmware, optional encryption, and secure erase capabilities. By ensuring that firmware is authentic and unaltered, organizations can reduce the risk of data corruption and security vulnerabilities. Compliance with industry and regulatory standards allows IT teams to implement these SSDs in environments requiring rigorous data protection measures. Centralized management of security policies through HPE management tools simplifies administration and ensures consistent enforcement across storage deployments.

Use cases and workload suitability

HPE P07190-K21 NVMe read-intensive SSDs excel in applications dominated by read operations. Ideal workloads include database querying, analytics, virtual desktop infrastructure, content distribution, and caching systems. By prioritizing read performance and low latency, this SSD category ensures that applications respond quickly and consistently, even under heavy read workloads. Enterprises leveraging these drives can accelerate time-sensitive operations, improve end-user experience, and maintain efficient data center performance.

Maintenance, monitoring, and lifecycle management

The read-intensive NVMe SSD category provides robust tools for proactive monitoring and simplified maintenance. HPE’s Smart Carrier technology and centralized management platforms enable administrators to track drive health, predict failures, and perform firmware updates securely. Hot-swappable drive design allows for replacement or upgrades without disrupting system operations, ensuring continuous availability. Predictive analytics and monitoring help organizations maximize the lifecycle of deployed SSDs, minimize unplanned downtime, and reduce total cost of ownership (TCO) for enterprise storage infrastructure.

Advantages of the read-intensive NVMe SSD category

The HPE P07190-K21 category combines high-performance PCIe NVMe connectivity, read-optimized architecture, enterprise reliability, and digitally signed firmware to deliver exceptional storage solutions for mission-critical applications. Integration with HPE server and storage ecosystems provides centralized monitoring, predictive analytics, and simplified lifecycle management. Enterprises benefit from high-speed, low-latency read performance, efficient power and thermal management, and robust security, making this SSD category ideal for data-intensive, read-heavy workloads in modern data centers.

Performance optimization strategies

To fully leverage the capabilities of HPE P07190-K21 SSDs, enterprises can implement strategies such as workload-aware provisioning, tiered storage integration, and proper thermal and power planning. Consolidating read-intensive workloads on NVMe storage pools and monitoring performance metrics enables predictable, optimized performance while reducing operational overhead. Administrators can use HPE management tools to track latency, throughput, and IOPS to proactively optimize storage infrastructure, ensuring reliable performance for critical applications.

ciency.