HPE Proliant BL460C Gen9 813198-B21 No CPU, No RAM, HPE Dynamic Smart Array B140I

CPU

The HPE BL460C Gen9 813198-B21 Server comes with the unique feature of 'No CPU', which offers several benefits and importance for users.

Overview of HPE Proliant Bl460c Gen9 Blade Server CTO

Manufacturer Details

• Brand: HPE
• Part Number: 813198-B21
• Product Name: Proliant Bl460c Gen9 Blade Server CTO

Processor and Chipset

• CPU: No CPU included
• Maximum CPU Quantity: 1
• CPU Upgradability: Upgradable
• CPU Socket: LGA1151 Socket
• Chipset Type: Intel C236

Memory (RAM)

• Installed Memory Size: 0 GB / Up to 512 GB (maximum)
• Memory Technology: DDR4 SDRAM
• Memory Form Factor: DIMM 288-pin
• Features: HP SmartMemory
• Supported Memory Types:
  • PC4-17000 - 256 GB - Registered - ECC
  • PC4-17000 - 512 GB - Load-reduced - ECC

Hard Drive

• Type: No HDD included

Storage Controller

• Controller Type: 1 x SATA - Integrated - PCI Express 2.0 x4
• Interface Type: SATA 6 Gb/s
• Controller Name: HP Dynamic Smart Array B140i
• Channel Quantity: 2
• RAID Levels Supported: RAID 0, RAID 1

Graphics Controller

• Type: Integrated
• Graphics Processor: Matrox G200eh

Networking

• Remote Management Controller: Integrated Lights-Out 4 (iLO 4)

Expansion and Connectivity

Expansion Bays

• Total Bays: 2 (all available)
• Hot-Swap Bays: 2 x 2.5" SFF

Expansion Slots

• Total Slots: 16 (all available) DIMM 288-pin
• CPU Slots: 2 (all available)
• Expansion Slot (x16 Mode): 2
• MicroSDHC Card Slot: 1 (available)
• FlexibleLOM Slot: 1 (available)

Interfaces and Ports

• HP iLO Port: 1
• USB 3.0 Port: 1 (internal)

Physical Dimensions and Weight

• Width: 2.2 inches
• Depth: 20.4 inches
• Height: 7.1 inches
• Weight: 10.5 lbs

Improved Flexibility

By opting for a server with 'No CPU', users have the freedom to choose the exact processor that meets their specific requirements. This flexibility allows them to customize their server according to their workload and budget constraints. With a wide range of processor options available in the market, users can select the most suitable CPU for their business needs.

Cost Efficiency

One of the significant advantages of the 'No CPU' feature is its cost-effectiveness. Instead of paying for a pre-installed CPU that may not fully align with their requirements, users can save money by purchasing only the necessary components. This feature is particularly beneficial for small businesses or startups with limited budgets, as it enables them to invest in other critical areas.

Future-Proofing

The 'No CPU' feature also offers future-proofing capabilities. As technology rapidly advances, new processors with enhanced performance and efficiency are regularly introduced into the market. By opting for a server without a CPU, users can easily upgrade their system by replacing the existing processor with a newer and more powerful one. This ensures that their server remains up-to-date and capable of handling evolving workloads.

Compatibility

With the 'No CPU' feature, users can ensure compatibility with their existing systems or infrastructure. They can choose a processor that seamlessly integrates with their current setup, avoiding any potential compatibility issues or system conflicts. This compatibility factor is crucial for businesses that already have a well-established IT infrastructure in place.

Performance Optimization

The ability to select a specific CPU allows users to optimize the server's performance based on their unique workload requirements. Users can choose a high-performance CPU for resource-intensive tasks or opt for a more energy-efficient processor for lower-demand workloads. This customization enables users to maximize the server's capabilities and achieve optimal performance.

Scalability

The 'No CPU' feature also facilitates scalability. As businesses grow, their computing needs increase as well. With the option to choose a suitable CPU, users can easily upgrade their server's processing power as their workload expands. This scalability feature ensures that the server can handle the growing demands of the business without the need for a complete system replacement.

Enhanced Energy Efficiency

By selecting a CPU tailored to their specific requirements, users can optimize energy efficiency. A well-matched processor consumes only the necessary power, reducing energy wastage and lowering electricity costs. This eco-friendly feature not only benefits the environment but also contributes to long-term cost savings for businesses.

Reliability and Longevity

The 'No CPU' feature enhances the reliability and longevity of the server. By choosing a high-quality processor from reputable manufacturers, users can ensure that their system operates smoothly and remains stable even under heavy workloads. This reliability factor is crucial for businesses that heavily rely on their servers for critical operations.

RAM

The HPE BL460C Gen9 813198-B21 Server offers the unique feature of 'No RAM', providing various benefits and importance for users.

Customizability

With the 'No RAM' feature, users have complete control over the selection and configuration of their server's memory. They can choose the exact type, capacity, and speed of RAM modules that best suit their specific needs. This customizability ensures that the server's memory aligns perfectly with their workload requirements, resulting in optimal performance.

Cost Optimization

The 'No RAM' feature also helps in cost optimization for users. Instead of paying for pre-installed RAM modules that may not fully meet their requirements, users can save money by purchasing only the necessary memory components. This cost-saving advantage is particularly valuable for businesses with budget constraints, allowing them to allocate resources to other critical areas.

Future Upgradability

By opting for a server without pre-installed RAM, users gain the advantage of future upgradability. As their workload or application requirements evolve, they can easily add or replace RAM modules to accommodate the changing needs. This flexibility ensures that the server remains capable of handling increased workloads and staying up-to-date with advancements in memory technology.

Performance Enhancement

The ability to select specific RAM modules enables users to enhance the server's performance. They can choose modules with higher capacities and faster speeds, allowing for quicker data access and improved overall system responsiveness. This performance enhancement is particularly beneficial for tasks that involve extensive data processing or require rapid access to large datasets.

Compatibility Assurance

The 'No RAM' feature ensures compatibility with existing systems or infrastructure. Users can select RAM modules that seamlessly integrate with their current setup, avoiding any potential compatibility issues or conflicts. This compatibility assurance is crucial for businesses that already have established memory configurations or have specific memory requirements dictated by their software applications.

Scalability and Expansion

The 'No RAM' feature facilitates scalability and expansion. As businesses grow, their memory requirements increase as well. With the option to choose their own RAM modules, users can easily expand the server's memory capacity to meet growing demands. This scalability feature ensures that the server can handle the increasing workloads without the need for a complete system replacement.

Fault Tolerance and Reliability

By individually selecting high-quality RAM modules, users can enhance fault tolerance and improve system reliability. Faulty or incompatible RAM modules can lead to system crashes or data corruption. With the 'No RAM' feature, users can ensure that only reliable and compatible memory components are installed, minimizing the risk of system failures and ensuring smooth operation.

Optimized Virtualization Performance

The 'No RAM' feature allows users to optimize virtualization performance. Virtualized environments heavily rely on memory resources, and by selecting the appropriate RAM modules, users can ensure sufficient memory allocation to virtual machines. This optimization enhances overall virtualization performance, allowing for more efficient resource utilization and improved application responsiveness.

Storage

The HPE BL460C Gen9 813198-B21 Server is equipped with the HPE Dynamic Smart Array B140I storage feature, offering several benefits and importance for users.

Flexible Storage Configuration

The HPE Dynamic Smart Array B140I provides flexible storage configuration options. Users can choose from various RAID levels, including RAID 0, 1, and 10, to meet their specific data redundancy and performance requirements. This flexibility enables businesses to adapt their storage setup based on their workload demands and IT infrastructure limitations.

Improved Data Protection

The RAID capabilities of the HPE Dynamic Smart Array B140I enhance data protection. By configuring RAID levels that provide redundancy, such as RAID 1 or RAID 10, users can ensure that their data remains safe even in the event of a hard drive failure. This data protection feature is crucial for businesses that store critical or sensitive data on their servers.

Enhanced Performance

The HPE Dynamic Smart Array B140I improves overall storage performance. With support for RAID levels that offer data striping, such as RAID 0, users can achieve faster data access and improved read and write speeds. This enhanced performance is particularly beneficial for applications that involve intensive data processing or require rapid retrieval of large datasets.

Scalability and Capacity Expansion

The HPE Dynamic Smart Array B140I enables scalability and capacity expansion. As businesses grow and their storage requirements increase, users can easily add additional drives to the server to expand the storage capacity. This scalability feature ensures that the server can accommodate the growing storage demands without the need for a complete storage system overhaul.

Simplified Management

The HPE Dynamic Smart Array B140I simplifies storage management. With its intuitive management interface, users can easily configure and monitor the RAID setup. This simplified management feature reduces the complexity of storage administration tasks, enabling users to efficiently manage their storage resources and ensure optimal performance.

Cost Efficiency

The HPE Dynamic Smart Array B140I offers cost efficiency by leveraging the server's built-in RAID capabilities. Users do not need to invest in separate RAID controllers, saving money on additional hardware costs. This cost-saving advantage is particularly valuable for businesses with limited budgets or those looking to optimize their IT infrastructure expenses.

Data Redundancy and Reliability

The HPE Dynamic Smart Array B140I ensures data redundancy and reliability. With its support for RAID levels that provide fault tolerance, businesses can protect their critical data against drive failures. This redundancy feature minimizes the risk of data loss or system downtime, ensuring uninterrupted business operations and maintaining data integrity.

Hot-Swappable Drives

The HPE Dynamic Smart Array B140I supports hot-swappable drives, allowing users to replace or add drives without shutting down the server. This hot-swapping capability reduces system downtime during maintenance or drive upgrades, ensuring continuous availability and minimizing disruptions to business operations.

Additional Features

The HPE BL460C Gen9 813198-B21 Server features the Smart Array CTO as an additional component, offering several benefits and importance for users.

Enhanced Storage Performance

The Smart Array CTO enhances storage performance by providing advanced caching capabilities. With its built-in cache memory, the Smart Array CTO can significantly improve read and write speeds, resulting in faster data access and improved application performance. This enhanced storage performance is particularly beneficial for applications that involve frequent data retrieval or intensive database operations.

Increased Data Availability

The Smart Array CTO improves data availability through its support for RAID levels that provide fault tolerance, such as RAID 1, 5, and 6. By implementing these RAID configurations, users can ensure that their data remains accessible even in the event of drive failures. This increased data availability feature is crucial for businesses that rely on continuous access to their critical data.

Improved Data Protection

The Smart Array CTO offers improved data protection capabilities. By leveraging its RAID functionalities, users can configure redundancy levels that provide data mirroring or parity-based protection. This enhanced data protection ensures that critical information remains safe and accessible, reducing the risk of data loss or system downtime.

Flexible Storage Configuration

The Smart Array CTO provides flexible storage configuration options. Users can choose from various RAID levels and adjust their storage setup according to their specific requirements. This flexibility allows businesses to optimize their storage resources based on their workload demands and data protection needs.

Efficient Resource Utilization

The Smart Array CTO enables efficient resource utilization through its support for advanced caching algorithms. By intelligently caching frequently accessed data, the Smart Array CTO minimizes read and write operations to the physical drives, resulting in improved overall storage performance and reduced latency. This efficient resource utilization allows businesses to maximize the utilization of their storage infrastructure.

Easy Management and Monitoring

The Smart Array CTO offers easy management and monitoring capabilities. With its intuitive management interface, users can easily configure and monitor the RAID setup, view drive health status, and receive proactive notifications in case of any issues. This simplified management feature reduces the complexity of storage administration tasks, enabling users to efficiently manage their storage resources.

Scalability and Expansion

The Smart Array CTO facilitates scalability and expansion. As businesses grow and their storage needs increase, users can easily add additional drives or expand the RAID configuration to accommodate the growing demands. This scalability feature ensures that the server's storage capabilities can keep pace with the evolving data requirements without the need for a complete system replacement.

High Availability and Redundancy

The Smart Array CTO ensures high availability and redundancy through its support for RAID configurations that provide fault tolerance. By implementing these redundancy levels, businesses can minimize the risk of data loss or system downtime due to drive failures. This high availability feature is crucial for mission-critical applications or environments where continuous data access is essential.