Cisco IE-2000-16TC-G-L Industrial Ethernet Switch 20 Ports Managed

Overview of Cisco IE-2000-16TC-G-L Ethernet Switch

• Manufacturer: Cisco
• Part Number: IE-2000-16TC-G-L
• Device Type: Managed Ethernet Switch
• Ports: 20 Ports total, including 16 Fast Ethernet ports and 4 Gigabit Ethernet ports
• Mounting: Din Rail mountable for industrial applications

Performance and Capacity

• Forwarding Rate: 6.5 Mpps at 64-byte packet size for efficient data handling
• Virtual LAN (VLAN) Capacity: Supports up to 255 VLANs for network segmentation
• MAC Address Table: 8,000 entries to handle multiple connected devices

Advanced Networking Protocols

• Routing Protocols: IGMP and Static IPv4 routing for efficient network management
• Remote Management: Compatible with SNMP v3, HTTPS, and SSH for secure remote configuration
• Authentication Methods: Supports SSH, RADIUS, and TACACS+ for enhanced security

Ethernet Ports and Expansion

• Fast Ethernet Ports: 16 x 10/100Base-TX RJ-45 connections
• Gigabit Ethernet Ports: 2 x 1000Base-T RJ-45 and 2 x Gigabit SFP combo ports
• Additional Expansion: 4 x SFP (mini-GBIC) slots for further flexibility

Switching Features

• Storm Control: Broadcast, Multicast, and Unicast storm control for network protection
• Spanning Tree Protocol: Supports STP and Rapid STP to prevent loops and ensure network stability
• Quality of Service (QoS): Prioritizes critical network traffic for better performance
• Port Security: Limits unauthorized access to network ports

Compliance and Memory Specifications

• Compliance: Adheres to IEEE 802.1x standards for network access control
• RAM: 256 MB for smooth operations
• Flash Memory: 64 MB for system firmware and configurations

Expansion Slots

• SD Card Slot: 1 x SD memory card slot for additional storage options

Ports

The Cisco IE-2000-16TC-G-L Industrial Ethernet Switch is equipped with a remarkable 20 ports, making it an ideal choice for industrial environments that require high-density network connectivity. These ports are designed to provide reliable and efficient data transmission, ensuring seamless communication between devices within the network.

Increased Connectivity

With 20 ports, users can connect a wide range of devices such as computers, servers, printers, and other networking equipment to the switch. This allows for greater flexibility in designing and expanding network infrastructure, accommodating the growing needs of industrial applications. Whether you need to connect multiple sensors on your factory floor or establish a comprehensive surveillance system, the abundance of ports on the Cisco IE-2000-16TC-G-L ensures that you have ample connectivity options.

Improved Data Transfer Speed

Each port on the Cisco IE-2000-16TC-G-L supports Fast Ethernet, providing data transfer speeds of up to 100 Mbps. This enables quick and efficient transmission of large files, ensuring minimal latency and enhanced productivity. With faster data transfer speeds, industrial processes can run smoothly without any bottlenecks or delays.

Reliable Network Performance

The Cisco IE-2000-16TC-G-L is designed to deliver high reliability and uptime. Each port is equipped with advanced features such as auto-negotiation and auto-MDI/MDIX, which automatically detect the speed and duplex settings of connected devices. This eliminates the need for manual configuration and ensures seamless communication between devices. Additionally, the switch supports Quality of Service (QoS) mechanisms to prioritize critical traffic and minimize packet loss, guaranteeing reliable network performance even in demanding industrial environments.

Scalability and Future-Proofing

The 20 ports on the Cisco IE-2000-16TC-G-L provide ample room for expanding your network infrastructure as your business grows. Whether you need to add more devices or connect to additional network segments, the switch offers the scalability required to accommodate future expansion. By investing in a switch with a generous number of ports, you can future-proof your network and avoid the hassle of upgrading or replacing equipment shortly.

Management

The Cisco IE-2000-16TC-G-L is a managed switch, offering advanced management capabilities that provide users with greater control and visibility over their network. This feature is especially crucial in industrial environments where network reliability, security, and performance are of utmost importance.

Centralized Network Control

As a managed switch, the Cisco IE-2000-16TC-G-L allows administrators to centrally manage and monitor the entire network infrastructure. Through a user-friendly web interface or command-line interface (CLI), administrators can configure and control various aspects of the switch, including VLANs, security settings, and Quality of Service (QoS) parameters. This centralized control simplifies network management tasks and enables efficient troubleshooting, ensuring optimal network performance.

Enhanced Security

Security is a top priority in industrial environments where sensitive data and critical operations are at stake. The Cisco IE-2000-16TC-G-L offers advanced security features such as Access Control Lists (ACLs), which allow administrators to define and enforce policies to regulate network access. By controlling who can connect to the network and what resources they can access, ACLs help prevent unauthorized access and protect against potential security threats.

Improved Network Performance

The managed capabilities of the Cisco IE-2000-16TC-G-L enable administrators to prioritize critical traffic and allocate bandwidth effectively using Quality of Service (QoS) mechanisms. This ensures that mission-critical applications receive the necessary bandwidth and resources, guaranteeing optimal network performance. By managing network traffic and mitigating congestion, the switch helps to minimize latency and packet loss, providing a reliable and responsive network infrastructure.

Network Monitoring and Troubleshooting

In industrial environments, it is crucial to have visibility into network performance and quickly identify any issues that may arise. The Cisco IE-2000-16TC-G-L offers comprehensive monitoring and troubleshooting capabilities, allowing administrators to monitor network traffic, analyze performance statistics, and identify potential bottlenecks or anomalies. With real-time monitoring, administrators can proactively address network issues, minimizing downtime and maximizing productivity.

Series

The Cisco IE-2000-16TC-G-L belongs to the Cisco IE 2000 Series, which is specifically designed for industrial environments. This series offers several benefits and features that make it an ideal choice for industrial applications.

Ruggedized Design

The Cisco IE 2000 Series switches are built to withstand the harsh conditions commonly found in industrial environments. With a rugged design, these switches can operate reliably in extreme temperatures, high humidity, and dusty environments. The Cisco IE-2000-16TC-G-L is no exception, ensuring uninterrupted operation even in demanding industrial settings.

Industrial-Grade Reliability

Reliability is paramount in industrial applications where downtime can result in significant financial losses and safety hazards. The Cisco IE 2000 Series switches are designed to deliver high reliability and uptime. Equipped with redundant power inputs and support for ring redundancy protocols such as Rapid Spanning Tree Protocol (RSTP) and Media Redundancy Protocol (MRP), these switches provide fault tolerance and ensure uninterrupted operation in the event of a network failure.

Wide Range of Connectivity Options

The Cisco IE 2000 Series switches offer a wide range of connectivity options to meet the diverse needs of industrial applications. These switches support various interfaces, including copper, fiber, and Power over Ethernet (PoE), allowing users to connect different types of devices and equipment. The flexibility in connectivity options ensures compatibility with existing infrastructure and enables seamless integration of new devices into the network.

Easy Deployment and Management

The Cisco IE 2000 Series switches are designed for easy deployment and management in industrial environments. These switches support a variety of management protocols, including Simple Network Management Protocol (SNMP) and Command-Line Interface (CLI), making it easy for administrators to configure, monitor, and troubleshoot the switches. Additionally, these switches support Cisco's Industrial Network Director (IND) software, which provides a centralized management platform for efficient network administration.

In conclusion, the Cisco IE-2000-16TC-G-L Industrial Ethernet Switch offers an impressive 20 ports, providing increased connectivity options and improved data transfer speeds. With its managed capabilities, it allows for centralized network control, enhanced security, and improved network performance. Being part of the Cisco IE 2000 Series, it offers a rugged design, industrial-grade reliability, and a wide range of connectivity options. These features make the Cisco IE-2000-16TC-G-L an ideal choice for industrial environments where reliability, security, and performance are paramount.