HP 650933-B21 H220 6GBPS SAS SATA PCI-E 3.0 Host Bus Adapter

HP 650933-B21 Overview

General Details

• Manufacturer: Hewlett Packard (HP)
• Part Number/SKU: 650933-B21
• Product Category: Host Bus Adapters (HBA) & Controllers
• Type: SAS-SATA Controller

Technical Specifications

Device Attributes

• Device Type: Low Profile Storage Controller - Plug-in Card
• Interface: Serial ATA/600 and Serial Attached SCSI (SAS)
• Bus Interface: PCI Express 3.0 x8
• Data Transfer Speed: 768 Mbps
• Ports: 2 x 6 Gb/s SAS Mini-SAS Internal
• Supported Platforms: PC, Linux, SPARC

Compatibility Details

ProLiant DL Series (Rack-Optimized)

• HPE ProLiant DL160 Gen8
• HPE ProLiant DL320e Gen8
• HPE ProLiant DL360e Gen8
• HPE ProLiant DL380e Gen8
• HPE ProLiant DL380p Gen8
• HPE ProLiant DL385p Gen8
• HPE ProLiant DL560 Gen8

ProLiant ML Series (Expansion-Optimized)

• HPE ProLiant ML310e Gen8
• HPE ProLiant ML350e Gen8
• HPE ProLiant ML350p Gen8

ProLiant SL Series (Scalable System)

• HPE ProLiant SL250s Gen8
• HPE ProLiant SL270s Gen8

Interface: SAS SATA

The HP H220 Host Bus Adapter (HBA) is equipped with the SAS SATA interface, which offers users a range of benefits and functionalities. This interface allows for the seamless integration of SAS and SATA devices, providing flexibility and compatibility for various storage needs.

Enhanced Performance

The SAS SATA interface enhances the performance of the HP H220 HBA by supporting both SAS and SATA drives. This enables users to leverage the advantages of both technologies, optimizing their storage infrastructure. SAS drives are known for their high-performance capabilities, delivering faster data transfer rates and lower latency. SATA drives, on the other hand, offer larger storage capacities at a more affordable price point. By combining these two technologies, users can create a balanced storage environment that meets their specific requirements.

Increased Scalability

With the SAS SATA interface, users can easily scale their storage infrastructure to accommodate growing data demands. The interface supports a wide range of SAS and SATA devices, including hard disk drives (HDDs) and solid-state drives (SSDs). This enables users to mix and match different drive types based on their performance, capacity, and cost requirements. Whether it's adding more SAS drives for high-performance workloads or integrating SATA drives for cost-effective bulk storage, the flexibility provided by the SAS SATA interface ensures that users can easily adapt to changing storage needs.

Interoperability

One of the key advantages of the SAS SATA interface is its interoperability with various storage devices. The interface is designed to be compatible with a wide range of SAS and SATA controllers, backplanes, and enclosures. This allows users to seamlessly connect their HP H220 HBA to their existing storage infrastructure without any compatibility issues. Additionally, the interface supports hot-plug functionality, enabling users to add or remove drives while the system is still running. This ensures uninterrupted operation and simplifies maintenance tasks.

Cost Efficiency

By utilizing the SAS SATA interface, users can achieve cost efficiency in their storage infrastructure. The interface allows for the utilization of SATA drives, which are generally more affordable compared to SAS drives. This is particularly beneficial for organizations with large-scale storage needs, as they can leverage the cost savings offered by SATA drives without compromising on performance. Additionally, the interoperability of the SAS SATA interface ensures that users can repurpose their existing storage devices, further reducing costs.

Data Protection

The SAS SATA interface provides users with enhanced data protection capabilities. SAS drives, known for their reliability, offer features such as error detection and correction, ensuring data integrity during transmission. SATA drives, on the other hand, support features like native command queuing (NCQ) and hot-plug support, enhancing data availability and system resilience. By combining these technologies through the SAS SATA interface, users can create a robust storage environment that safeguards their critical data.

Bus Type: PCI-E 3.0

The HP H220 HBA utilizes the PCI-E 3.0 bus type, offering users a range of benefits and advantages. This high-speed bus technology enables efficient data transfer between the host system and the HBA, ensuring optimal performance and reliability.

Enhanced Bandwidth

The PCI-E 3.0 bus type provides significantly higher bandwidth compared to previous generations. With a per-lane data rate of up to 8 gigatransfers per second (GT/s), PCI-E 3.0 offers twice the bandwidth of its predecessor, PCI-E 2.0. This increased bandwidth allows for faster data transfer between the host system and the HBA, reducing latency and improving overall system performance.

Future-Proof Technology

By adopting the PCI-E 3.0 bus type, the HP H220 HBA ensures compatibility with the latest and future generations of systems. As technology evolves, newer systems are likely to be equipped with PCI-E 3.0 slots, making the HBA easily deployable without any compatibility concerns. This future-proof technology safeguards users' investments, allowing them to seamlessly upgrade their systems without the need for additional hardware replacements.

Scalability and Flexibility

The PCI-E 3.0 bus type offers improved scalability and flexibility for storage environments. With multiple lanes available, users can connect multiple HBAs or other PCI-E devices to the host system, expanding their storage capacity and capabilities. This enables users to scale their storage infrastructure based on their evolving needs, whether it's adding more HBAs for increased performance or integrating RAID controllers for enhanced data protection.

Power Efficiency

The PCI-E 3.0 bus type incorporates power-saving features that contribute to overall system energy efficiency. Enhanced power management capabilities allow devices to operate at lower power levels when idle or under low-load conditions, reducing energy consumption and heat generation. This not only helps organizations reduce their carbon footprint but also lowers operational costs by minimizing power requirements.

Improved Reliability

The HP H220 HBA's utilization of the PCI-E 3.0 bus type ensures a reliable and stable connection between the host system and the HBA. The advanced error detection and correction mechanisms of PCI-E 3.0 help maintain data integrity during transmission, minimizing the risk of data loss or corruption. Additionally, the hot-plug support provided by the bus type enables easy device insertion and removal, enhancing system availability and simplifying maintenance procedures.

Part Number: 650933-B21

The HP H220 HBA is identified by its unique part number, 650933-B21, which holds significant importance for users. This part number serves as a reference to identify and procure the specific HBA model, ensuring compatibility and facilitating support and maintenance processes.

Product Identification

The part number, 650933-B21, uniquely identifies the HP H220 HBA within the HP product portfolio. This identification ensures that users can easily locate and select the correct HBA model when purchasing or procuring the product. By referencing the part number, users can confidently acquire the specific HBA variant they require, avoiding any confusion or compatibility issues.

Compatibility Assurance

The part number, 650933-B21, indicates that the HBA has undergone rigorous testing and validation to ensure compatibility with HP systems and components. HP designs its HBAs to seamlessly integrate with their servers and storage solutions, providing users with a reliable and optimized storage infrastructure. By choosing an HBA with a known part number, users can be confident in its compatibility with their existing HP infrastructure, allowing for a seamless integration process.

Warranty and Support

The part number plays a crucial role in warranty and support processes. By providing the specific part number, users can easily register their HP H220 HBA for warranty coverage and access technical support services when needed. The part number serves as a reference point for HP's customer support team to quickly identify the product variant and provide appropriate assistance. This ensures that users receive timely support and maintenance services, minimizing downtime and maximizing productivity.

Documentation and Resources

The part number is often referenced in product documentation and resources provided by HP. User manuals, installation guides, firmware updates, and drivers may be specific to certain product variants. By knowing the part number of their HP H220 HBA, users can access the relevant documentation and resources tailored to their specific model. This ensures that users have access to accurate and up-to-date information, facilitating smooth installation, configuration, and ongoing maintenance of their HBA.

Product Differentiation

In a diverse market with numerous HBA options, the part number helps differentiate the HP H220 from other similar products. This unique identifier allows users to quickly identify and compare the features, specifications, and compatibility of the H220 HBA against competing offerings. By having a distinctive part number, HP ensures that users can make informed decisions based on their specific requirements, ensuring they select the most suitable HBA for their storage needs.

In conclusion, the HP H220 Host Bus Adapter offers users the benefits of the SAS SATA interface, enabling enhanced performance, scalability, interoperability, cost efficiency, and data protection. The PCI-E 3.0 bus type provides users with increased bandwidth, future-proof technology, scalability, power efficiency, and reliability. The part number, 650933-B21, ensures product identification, compatibility assurance, warranty and support access, documentation and resource availability, and product differentiation.