HPE 869079-B21 E208I-A PCI-E 3.0 X8 SAS 12GBPS SATA 6GBPS SR Raid Controller

Interface: SAS 12GBPS, SATA 6GBPS

Enhanced Performance and Flexibility

The HPE E208I-A PCI-E offers an impressive interface that combines the power of SAS 12GBPS and SATA 6GBPS. This high-speed interface enables users to experience enhanced performance and flexibility in their storage solutions. Whether you are running demanding applications or handling large amounts of data, this interface ensures smooth and efficient operations.

Increased Data Transfer Speeds

The SAS 12GBPS interface provides lightning-fast data transfer speeds, allowing you to handle even the most demanding workloads with ease. With a higher bandwidth, you can transfer large files, perform backups, and access data at a much faster rate. This results in reduced latency and improved overall system performance.

Compatibility with Various Drives

The SATA 6GBPS interface is widely supported by a wide range of hard drives and solid-state drives (SSDs). This compatibility ensures that you have the flexibility to choose the storage devices that best suit your needs. Whether you prefer traditional hard drives or cutting-edge SSDs, the HPE E208I-A PCI-E has you covered.

Improved Scalability

The SAS 12GBPS and SATA 6GBPS interfaces offer improved scalability options for your storage infrastructure. You can easily expand your storage capacity by adding additional drives without sacrificing performance. This scalability is crucial for businesses that experience rapid data growth or need to accommodate evolving storage requirements.

Reliable and Secure Data Transfer

The combination of SAS and SATA interfaces ensures reliable and secure data transfer. SAS provides enterprise-level reliability, offering features such as error correction and redundancy to protect your data from corruption or loss. SATA, on the other hand, offers native command queuing (NCQ) for efficient data handling and hot swap support for easy drive replacement.

Redundancy and Fault Tolerance

The SAS 12GBPS interface supports RAID (redundant array of independent disks) configurations, which provide redundancy and fault tolerance. RAID allows you to combine multiple drives into a single logical unit, offering improved data protection and increased system availability. In case of a drive failure, the RAID configuration ensures that your data remains accessible and intact.

Optimized Storage Performance

By utilizing the SAS 12GBPS and SATA 6GBPS interfaces, you can optimize your storage performance. The high data transfer speeds and compatibility with various drives enable you to create a storage solution tailored to your specific needs. Whether you require high-speed access or large storage capacity, this interface ensures that your storage solution performs at its best.

Raid Support: SR

Enhanced Data Protection

The HPE E208I-A PCI-E offers robust RAID support, specifically with SR (SmartRAID) technology. This RAID controller provides advanced features that enhance data protection and reliability. By utilizing SR RAID support, users can safeguard their critical data and minimize the risk of data loss.

Fault Tolerance and Redundancy

SR RAID support enables users to configure various RAID levels such as RAID 0, 1, 5, and 10. These RAID levels offer different combinations of fault tolerance, redundancy, and performance. RAID 1, for example, mirrors data across multiple drives, providing redundancy in case of a drive failure. RAID 5 stripes data across multiple drives with parity information, allowing for both fault tolerance and increased performance.

Improved System Availability

One of the key benefits of SR RAID support is improved system availability. In the event of a drive failure, the RAID configuration ensures that your system remains operational without any interruption. By utilizing hot-swap capabilities, you can replace the failed drive while the system is still running, minimizing downtime and maximizing productivity.

Data Integrity and Recovery

SR RAID support includes features such as data integrity checks and automatic data recovery. The controller constantly monitors the integrity of the data and alerts you if any inconsistencies are detected. In case of a drive failure, the controller automatically rebuilds the data onto a replacement drive, ensuring that your data remains intact and accessible.

Scalability and Flexibility

SR RAID support offers scalability and flexibility for your storage infrastructure. You can easily expand your storage capacity by adding more drives to your RAID array without disrupting the existing data. This scalability is particularly beneficial for businesses that experience rapid data growth or need to adapt to changing storage requirements.

Efficient Resource Utilization

With SR RAID support, you can efficiently utilize your storage resources. The controller optimizes disk space utilization by distributing data across multiple drives in a balanced manner. This not only maximizes storage capacity but also improves performance by evenly distributing read and write operations.

Customizable RAID Configurations

SR RAID support allows users to customize their RAID configurations according to their specific needs. Whether you prioritize performance, data protection, or a balance between the two, you can configure your RAID setup accordingly. This level of customization ensures that your storage solution is tailored to meet your unique requirements.

Part Number: 869079-B21

Easy Identification and Compatibility

The HPE E208I-A PCI-E is easily identifiable by its unique part number, 869079-B21. This part number serves as an essential identifier for the specific product, making it easier for users to locate and purchase the exact model they need. Additionally, the part number ensures compatibility with other HPE products and components.

Seamless Integration with HPE Systems

The HPE E208I-A PCI-E with the part number 869079-B21 is specifically designed to seamlessly integrate with HPE systems. This compatibility ensures that the RAID controller works flawlessly with other HPE hardware and software components. By using a controller that is optimized for your system, you can expect superior performance and reliability.

Efficient Technical Support

Having a specific part number like 869079-B21 simplifies the process of seeking technical support. When encountering any issues or needing assistance, you can provide the part number, enabling support personnel to quickly identify your exact product model. This streamlines the troubleshooting process and ensures that you receive efficient and accurate support.

Product Documentation and Updates

The part number 869079-B21 also facilitates easy access to relevant product documentation and updates. By searching for the specific part number, you can quickly find user manuals, installation guides, firmware updates, and other resources related to the HPE E208I-A PCI-E. Staying up-to-date with the latest information ensures that you can maximize the potential of your RAID controller.

Seamless Replacement and Upgrades

In case of a hardware failure or when upgrading your system, having a specific part number simplifies the replacement or upgrade process. You can easily order a new HPE E208I-A PCI-E with the same part number, ensuring compatibility and a hassle-free installation process. This saves time and effort, allowing you to get your system back up and running quickly.

Compatibility with Spare Parts

The part number 869079-B21 ensures compatibility with spare parts and accessories. If you need to replace any components associated with the HPE E208I-A PCI-E, such as cables or connectors, you can easily identify the required parts using the part number. This compatibility eliminates any guesswork and ensures that the replacement parts fit perfectly with your RAID controller.

Easy Product Comparison

The part number 869079-B21 enables users to compare different models of the HPE E208I-A PCI-E effortlessly. By comparing part numbers, you can identify the specific features and specifications of each model, allowing you to select the one that best suits your requirements. This comparison process ensures that you make an informed decision and choose the right RAID controller for your needs.