HPE JL825-61001 5140 48G PoE+ 2SFP+ 2XGT EI Managed Network Switches

Product Summary

HPE JL825-61001 FlexNetwork 5140 Switch

The HPE JL825-61001 FlexNetwork 5140 is a versatile switch designed to enhance your network's efficiency. With a compact 1U rack-mountable form factor, it supports a range of features ideal for both small and large-scale environments.

Key Specifications

• Device Type: Smart Layer 3 Switch with 48 Ports
• Form Factor: Rack-mountable, 1U
• Network Type: Gigabit Ethernet

Port Configuration

• Ports:
  • 48 x 10/100/1000 Mbps (PoE+)
  • 2 x 1/10 Gigabit SFP+
  • 2 x 10 Gigabit Ethernet RJ-45
• Power over Ethernet (PoE): Yes, PoE+
• PoE Budget: 370 Watts

Capacity and Performance

• IPv4 Routing Table Entries: 512
• IPv6 Routing Table Entries: 256
• VLAN IDs: 4094
• MAC Address Table Size: 16,384 Entries
• Jumbo Frame Support: 9216 Bytes

Routing Protocols

• OSPF, RIP-1, RIP-2
• IGMP, OSPFv2, IGMPv3, OSPFv3
• Static IPv4 and IPv6 Routing
• Classless Inter-Domain Routing (CIDR)

Remote Management and Security

• Management Protocols:
  • SNMP (v1, v2c, v3)
  • RMON (1, 2, 3, 9)
  • Telnet, HTTPS, TFTP, SSH-2
• Encryption: SSL
• Authentication Methods:
  • SSH, RADIUS, TACACS, TACACS+
  • SSH2

Advanced Features

• Flow Control and Load Balancing
• Auto-Uplink (Auto MDI/MDI-X)
• IGMP Snooping and VLAN Support
• Quality of Service (QoS) and Access Control Lists (ACLs)
• High Availability and Full Duplex Mode
• Dynamic ARP Protection and DHCP Protection
• Link Aggregation Control Protocol (LACP)
• Virtual Route Redundancy Protocol (VRRP)

Compliance Standards

• IEEE 802.3 Standards (802.3, 802.3u, 802.3ab, etc.)
• ANSI/TIA-1057, IEEE 802.1 Standards
• Support for various IEEE protocols including 802.1x, 802.1q, and 802.3at

Memory Specifications

• RAM: 512 MB SDRAM
• Flash Memory: 256 MB

Connectivity and Expansion

Interfaces

• 48 x 1000Base-T RJ-45 (PoE+)
• 2 x Gigabit / 10Gbit LAN SFP+
• 2 x Gigabit / 10Gbit LAN RJ-45
• 1 x Console RJ-45 Management Port

Power Requirements

• Power Source: Internal Power Supply
• Power Output: 430 Watts (10 A)
• Input Voltage: AC 100-240 V (50/60 Hz)

Number Of Ports

The HPE JL825-61001 Managed Network Switches boast an impressive 52 ports, making them an ideal choice for businesses of all sizes. Whether you're a small startup or a large enterprise, having a high number of ports ensures that you have ample connectivity to support your network infrastructure.

Improved Connectivity

With 52 ports at your disposal, you can easily connect multiple devices to your network without worrying about running out of available ports. This allows for seamless communication and data transfer between devices, enabling your employees to work efficiently and collaborate effortlessly.

Scalability

The abundance of ports on the HPE JL825-61001 Managed Network Switches also means that you have room to grow. As your business expands and your network requirements increase, you can easily add more devices to your network without the need for additional switches. This scalability is crucial for businesses that anticipate future growth and want to avoid costly network upgrades.

Flexible Network Design

Having 52 ports gives you the flexibility to design your network in a way that best suits your organization's needs. You can segment your network into different VLANs (Virtual Local Area Networks) based on departments or security requirements. This allows for better traffic management and enhances network security by isolating sensitive data from the rest of the network.

Furthermore, the ample number of ports enables you to create redundancy in your network by implementing link aggregation. Link aggregation combines multiple physical connections into a single logical connection, increasing bandwidth and providing failover capabilities. This ensures uninterrupted network connectivity and minimizes downtime.

Power Over Ethernet

The HPE JL825-61001 Managed Network Switches come equipped with Power over Ethernet (PoE) capabilities, which is a game-changer for businesses that rely on powered devices such as IP phones, wireless access points, and security cameras.

Simplified Installation

With PoE, you can power these devices directly from the switch, eliminating the need for separate power adapters or power injectors. This not only simplifies the installation process but also reduces cable clutter and frees up power outlets, making your workspace more organized and efficient.

Cost Savings

By utilizing PoE, you can save on the cost of additional electrical infrastructure. Traditional methods of powering devices often require running separate power lines to each device, which can be time-consuming and costly. With PoE, you can leverage your existing Ethernet infrastructure to provide both data and power to connected devices, reducing installation costs and improving overall cost-efficiency.

Flexibility and Mobility

PoE also offers greater flexibility and mobility for your powered devices. With traditional power sources, you are limited by the length of the power cord. However, with PoE, you can place your devices wherever they are needed most, even in areas without nearby power outlets. This flexibility allows for easier device relocation and provides the freedom to adapt your workspace as needed.

SFP Ports

The HPE JL825-61001 Managed Network Switches feature 2 SFP (Small Form-factor Pluggable) ports. These ports offer versatile connectivity options and are highly beneficial for businesses that require high-speed connections or need to connect switches over long distances.

High-Speed Connectivity

SFP ports support various types of SFP transceivers, including fiber optic modules and copper modules. Fiber optic modules enable high-speed data transmission over long distances, making them ideal for interconnecting switches in different parts of a building or even across multiple locations.

Flexibility in Network Design

The inclusion of SFP ports in the HPE JL825-61001 Managed Network Switches provides flexibility in network design. You can choose the most suitable SFP transceiver for your specific needs, allowing you to mix and match different types of connections within your network. This flexibility is particularly valuable for businesses with unique network requirements or when integrating existing networking equipment.

Future-Proofing

SFP ports also offer future-proofing capabilities. As technology advances and network demands increase, SFP transceivers can be easily upgraded to support higher speeds. This means that your HPE JL825-61001 Managed Network Switches can adapt to evolving network infrastructure without the need for a complete switch replacement, saving you both time and money.

XGT Ports

The HPE JL825-61001 Managed Network Switches are equipped with 2 XGT (eXtended Gigabit Technology) ports. These ports provide users with ultra-high-speed connections and are designed for demanding network environments that require exceptional performance.

Unparalleled Speed

With XGT ports, you can achieve blazing-fast data transfer rates of up to 10 Gigabits per second (Gbps). This level of speed is essential for businesses that deal with large file transfers, real-time video streaming, or data-intensive applications. It ensures that your network can handle heavy workloads without experiencing bottlenecks or slowdowns.

Enhanced Productivity

The speed offered by XGT ports directly translates into improved productivity. Employees can quickly access and share files, collaborate in real-time, and seamlessly connect to bandwidth-intensive applications. This eliminates frustrating delays and allows your team to work efficiently, ultimately driving overall business productivity.

Future-Ready Infrastructure

Investing in switches with XGT ports ensures that your network infrastructure is future-ready. As the demand for higher bandwidth continues to grow, having XGT ports positions your business to handle upcoming technologies and emerging network requirements. This future-proofing capability saves you from costly network upgrades down the line and provides a solid foundation for long-term network scalability.