MB024000GYWRK HPE 24TB SATA 6GBPS 7.2K RPM LFF HDD

Details of HPE 24TB SATA 6GBPS HDD

The HPE MB024000GYWRK 24TB SATA 6Gbps 7.2K RPM LFF HDD is a high-capacity enterprise storage drive engineered for business-critical workloads. With advanced features such as Instant Secure Erase and helium technology, it delivers reliable performance and efficiency for modern data centers.

Brand Information

• Manufacturer: HPE
• Part Number: MB024000GYWRK
• Product Type: Hot-swap Hard Drive

Technical Highlights

Storage & Interface

• Capacity: 24TB
• Form Factor: 3.5-inch LFF (Large Form Factor)
• Interface: SATA 6Gb/s
• Bytes Per Sector: 512

Advanced Features

• Instant Secure Erase (ISE) for enhanced data protection
• Advanced Format 512e for optimized storage efficiency
• Helium technology for reduced friction and improved reliability

Physical Dimensions

• Width: 4.2 in
• Depth: 6.2 in
• Height: 1 in
• Bundled With: HPE Low Profile Carrier

Performance Metrics

• Drive Class: Business Critical
• Transfer Rate: 600 Mbps (external)
• Spindle Speed: 7200 RPM

Expansion & Connectivity

Interfaces

• Connection: 1 x SATA 6Gb/s

Compatible Bays

• Bay Type: 3.5-inch LFF slot

Enterprise-Class Large Capacity SATA Hard Drive Overview

The HPE MB024000GYWRK 24TB SATA 6Gbps 7.2K RPM 3.5-inch Low Profile Business Critical 512e ISE Helium Technology Multi Vendor Hard Drive belongs to the high-capacity enterprise SATA hard drive category designed for business-critical workloads. This category addresses the growing demand for reliable, cost-efficient, and scalable storage solutions in modern data centers, enterprise IT environments, and hybrid infrastructures. Enterprise SATA hard drives combine high storage density with proven rotational disk technology, making them suitable for applications where capacity, data integrity, and predictable performance are more critical than ultra-low latency.

Within this category, drives are engineered to operate continuously under heavy workloads, offering improved durability, enhanced firmware optimization, and compatibility across a wide range of servers and storage arrays. The 24TB capacity tier represents a strategic balance between maximizing storage density and minimizing total cost of ownership, especially for organizations managing large volumes of structured and unstructured data. The HPE MB024000GYWRK exemplifies this category by integrating helium-sealed technology, 512e sector formatting, and Instant Secure Erase functionality.

Business Critical Storage Design Philosophy

Business critical hard drives are purpose-built for environments where data availability and operational continuity are essential. Unlike desktop or nearline consumer drives, this category emphasizes reliability metrics such as higher MTBF ratings, workload optimization, and consistent performance under sustained usage. The HPE MB024000GYWRK is designed to support enterprise-class workloads including transactional databases, virtualized infrastructures, and shared storage pools that require dependable read and write behavior around the clock.

This category also prioritizes firmware-level intelligence that works in conjunction with enterprise controllers. Error recovery controls, command queuing optimization, and vibration tolerance are carefully calibrated to ensure that the drive operates harmoniously within multi-drive enclosures. These characteristics are essential in dense rack-mounted servers and storage systems where dozens or hundreds of drives operate simultaneously.

Enterprise SATA Interface Characteristics

The SATA 6Gbps interface remains a cornerstone of enterprise storage architectures due to its widespread compatibility and cost efficiency. In the business critical category, SATA drives are optimized to deliver stable throughput while maintaining interoperability with a broad range of HPE servers and third-party platforms. The interface supports high-capacity data transfers suitable for backup repositories, archival systems, and large-scale data lakes.

The HPE MB024000GYWRK leverages the mature SATA ecosystem while incorporating enterprise-grade firmware enhancements. This allows organizations to deploy high-capacity drives without requiring specialized controllers, simplifying infrastructure planning and reducing procurement complexity.

Rotational Speed and Performance Balance

Operating at 7.2K RPM, business critical SATA drives achieve an optimal balance between performance, power consumption, and thermal efficiency. This rotational speed is well suited for sequential workloads and mixed-use scenarios where sustained data access is more important than peak IOPS. The HPE MB024000GYWRK fits squarely into this performance profile, supporting predictable throughput for large file transfers and data-intensive applications.

In enterprise environments, consistent performance is often more valuable than maximum speed. The 7.2K RPM design ensures stable response times while minimizing heat generation and energy usage, which is crucial for large-scale deployments with stringent power and cooling constraints.

High-Capacity 24TB Storage Density Advantages

The 24TB capacity class represents a significant advancement in magnetic storage technology. Drives in this category enable organizations to store massive datasets within a smaller physical footprint, reducing rack space requirements and simplifying storage management. The HPE MB024000GYWRK supports these objectives by offering high areal density while maintaining enterprise reliability standards.

Higher-capacity drives allow IT teams to consolidate storage, reducing the total number of drives required in an array. This consolidation not only lowers hardware acquisition costs but also reduces operational expenses related to power, cooling, and maintenance. As data volumes continue to grow, 24TB business critical drives provide a scalable foundation for future expansion.

Use Cases for Large Capacity Business Critical Drives

Large capacity enterprise SATA drives are commonly deployed in environments that handle vast amounts of data with moderate access frequency. These include data warehousing, backup and recovery systems, media repositories, and compliance-driven archival storage. The HPE MB024000GYWRK is well suited for such use cases, delivering dependable performance while accommodating rapid data growth.

In virtualized infrastructures, high-capacity drives support large VM repositories and snapshot storage, ensuring that virtualization platforms can scale efficiently. In file and object storage systems, these drives enable centralized data access with consistent availability.

Helium-Sealed Drive Technology

Helium technology is a defining feature of modern high-capacity enterprise hard drives. By sealing the drive with helium instead of air, internal turbulence is significantly reduced, allowing for more platters to be housed within the same physical enclosure. The HPE MB024000GYWRK benefits from this technology by achieving higher capacity while maintaining mechanical stability.

Reduced internal friction results in lower power consumption and less heat generation. This contributes to improved reliability and longer operational life, which are critical factors in business critical storage environments. Helium-sealed drives also exhibit lower acoustic output, making them suitable for dense data center installations.

Reliability Enhancements Enabled by Helium

Helium’s lower density compared to air reduces drag on spinning platters, minimizing wear on internal components. This enhances long-term reliability and supports the continuous operation expected of enterprise storage devices. The HPE MB024000GYWRK leverages these advantages to deliver stable performance over extended deployment cycles.

In addition, helium-sealed designs improve vibration tolerance, which is essential in multi-drive enclosures. By mitigating the effects of rotational vibration, these drives maintain data integrity and consistent performance even in high-density configurations.

512e Advanced Format Sector Technology

Advanced Format technology is a standard feature in modern enterprise hard drives, addressing the need for more efficient data storage and error correction. The 512e format used by the HPE MB024000GYWRK combines 4K physical sectors with 512-byte logical sectors, ensuring compatibility with legacy systems while delivering improved efficiency.

This sector format enhances error correction capabilities, allowing the drive to detect and correct data issues more effectively. In business critical environments, where data accuracy is paramount, 512e technology provides an additional layer of protection without compromising compatibility.

Compatibility and System Integration Benefits

The 512e format ensures seamless integration with existing operating systems, applications, and storage controllers. Organizations can deploy the HPE MB024000GYWRK in mixed environments without requiring extensive reconfiguration or software updates. This compatibility simplifies migration projects and reduces deployment risk.

Advanced Format also supports higher storage densities by reducing overhead, allowing more user data to be stored within the same physical space. This contributes to the drive’s overall capacity advantage.

Instant Secure Erase and Data Protection

Data security is a critical consideration in enterprise storage. The HPE MB024000GYWRK includes Instant Secure Erase functionality, enabling rapid and reliable data sanitization. This feature allows organizations to securely repurpose or decommission drives without lengthy overwrite processes.

Instant Secure Erase supports compliance with data protection regulations and internal security policies. By ensuring that sensitive information is permanently removed, this feature reduces the risk of data leakage during asset disposal or redeployment.

Enterprise Security and Compliance Alignment

Business critical drives with secure erase capabilities are essential in industries with strict regulatory requirements, such as finance, healthcare, and government. The HPE MB024000GYWRK aligns with these requirements by providing built-in data sanitization mechanisms that are both efficient and reliable.

This security feature also simplifies operational workflows, allowing IT teams to manage storage lifecycles more effectively while maintaining compliance.

Multi Vendor Qualification and Interoperability

The multi vendor classification of the HPE MB024000GYWRK indicates broad compatibility across various enterprise platforms. This category of drives undergoes rigorous qualification processes to ensure reliable operation in heterogeneous environments. Organizations benefit from greater flexibility when designing or expanding their storage infrastructures.

Multi vendor drives reduce dependency on proprietary ecosystems, allowing businesses to integrate storage solutions from multiple suppliers without sacrificing performance or reliability. This approach supports cost optimization and long-term scalability.

HPE Server and Storage Ecosystem Integration

Within HPE environments, business critical SATA drives are optimized for seamless integration with ProLiant servers and HPE storage arrays. Firmware tuning and mechanical design considerations ensure compatibility with HPE drive carriers, controllers, and management tools.

This integration simplifies deployment, monitoring, and maintenance, enabling IT teams to manage large storage deployments with confidence.

Thermal Efficiency and Power Management

Efficient power usage and thermal management are essential in enterprise data centers. The HPE MB024000GYWRK is engineered to operate within optimized power envelopes, reducing energy consumption without compromising performance. Helium technology and optimized rotational speed contribute to lower operating temperatures.

Lower thermal output enhances overall system reliability and reduces cooling requirements, which can significantly impact operational costs in large-scale deployments. Business critical drives are designed to support these efficiency goals while maintaining continuous availability.

Enterprise Workload Optimization

Business critical drives are optimized to handle sustained workloads typical of enterprise applications. Firmware algorithms manage caching, error recovery, and command execution to ensure consistent performance under continuous operation. The HPE MB024000GYWRK is designed to support these workload patterns, making it suitable for always-on environments.

This optimization ensures that performance remains predictable even as drive utilization increases, supporting service level agreements and operational stability.