P06029-K21 HPE 16GB DDR4 3200MHz PC4-25600 ECC RDIMM Ram

Highlights of HPE P06029-K21 16GB DDR4 3200MHz Memory

The HPE P06029-K21 16GB DDR4 3200MHz PC4-25600 ECC Registered Memory is a genuine HPE SmartMemory module designed for high-performance enterprise servers. Built with advanced DDR4 technology, this memory module delivers faster data processing, improved reliability, and optimized power efficiency for modern server infrastructures.

General Information

• Manufacturer: HPE
• Part Number: P06029-K21
• Product Category: Server Memory Module
• Sub Type: DDR4 3200MHz PC4-25600
• Device Supported: Enterprise Servers

Technical Specifications

• Capacity: 16GB
• Number of Modules: 1 x 16GB
• Memory Type: DDR4 SDRAM
• Form Factor: 288-Pin DIMM

Performance Specifications

• Memory Speed: 3200MHz
• Bandwidth: PC4-25600
• CAS Latency: CL22
• Rank Type: Single Rank x4
• Error Checking: ECC
• Signal Processing: Registered
• Voltage: 1.2V

High-Speed 3200MHz DDR4 Performance

Performance Highlights

• Memory speed: 3200MHz
• Bandwidth standard: PC4-25600
• CAS latency: CL22
• Optimized for high-speed enterprise workloads

Energy Efficient DDR4 Design

Efficiency Benefits

• Low operating voltage: 1.2V
• Reduced power consumption
• Lower heat output
• Improved overall server efficiency

Compatibility

Supported HPE Server Models

• HPE ProLiant DL325 Gen10 Plus
• HPE ProLiant DL385 Gen10 Plus
• HPE ProLiant DL385 Gen10 Plus Entry

Overview of HPE P06029-K21 16GB DDR4 PC4-25600 Memory

The HPE P06029-K21 16GB DDR4 3200MHz PC4-25600 Genuine Smart CL22 288-Pin ECC RDIMM Memory Module is engineered to deliver reliable and scalable memory performance for enterprise-class server environments. Designed specifically for HPE ProLiant server systems, this memory module provides a powerful combination of high-speed DDR4 architecture, intelligent error correction capabilities, and enterprise-grade stability. In modern data centers where performance, uptime, and data integrity are critical, memory components must meet strict quality and compatibility standards. The HPE P06029-K21 memory module addresses these requirements by providing dependable high-bandwidth memory designed for continuous operation in demanding workloads.

Advanced DDR4 Memory Technology for Enterprise Servers

The HPE P06029-K21 module is built using DDR4 SDRAM technology, which represents a major evolution in memory architecture. DDR4 memory offers significant improvements over previous generations, including higher transfer rates, improved power efficiency, and enhanced reliability. These advancements enable servers to handle increasingly complex workloads without experiencing performance bottlenecks or excessive power consumption. Operating at a frequency of 3200MHz, the HPE P06029-K21 module delivers faster data transfer speeds compared to earlier DDR4 memory modules running at lower frequencies.

Enhanced Memory Bandwidth and Data Throughput

Memory bandwidth plays a critical role in server performance, particularly when handling multitasking environments and high-volume data processing. The PC4-25600 specification indicates that the HPE P06029-K21 memory module can achieve a theoretical peak bandwidth of approximately 25.6 GB per second. This bandwidth ensures that server processors receive data quickly and efficiently, supporting smooth operation even during intensive workloads.

Architectural Improvements of DDR4 SDRAM

DDR4 SDRAM introduces architectural enhancements designed to improve efficiency and stability. These improvements include increased bank groups, improved command scheduling, and more efficient data handling mechanisms. The HPE P06029-K21 module leverages these DDR4 innovations to ensure consistent performance across enterprise workloads. Another important advantage of DDR4 technology is improved signal integrity. Enhanced electrical signaling ensures that data can be transmitted accurately between the memory module and the server’s memory controller, even in high-density configurations.

Lower Power Consumption

DDR4 memory operates at a lower voltage compared to DDR3 modules, typically around 1.2 volts. This reduction in operating voltage helps decrease power consumption within the server environment. Lower power usage contributes to improved energy efficiency in data centers, reducing operational costs and minimizing heat generation. The HPE P06029-K21 memory module benefits from these energy-efficient characteristics, making it an ideal choice for large-scale enterprise deployments where hundreds or thousands of servers operate simultaneously.

HPE Smart Memory Technology and System

One of the defining features of the HPE P06029-K21 memory module is its classification as Genuine HPE Smart Memory. Smart Memory modules are specifically designed and validated by HPE to operate optimally within HPE ProLiant servers. These modules undergo extensive compatibility testing to ensure seamless integration with server firmware, BIOS settings, and system monitoring tools. Smart Memory technology enables advanced features such as enhanced memory performance tuning, improved system diagnostics, and proactive error detection. When installed in compatible HPE servers, Smart Memory modules allow the system to automatically recognize and configure memory parameters for optimal performance.

Intelligent Memory and Diagnostics

HPE Smart Memory modules provide advanced diagnostic capabilities that help system administrators monitor memory health and detect potential issues early. Integrated sensors and firmware communication allow the server to track memory performance metrics, including temperature, error rates, and operational status. This monitoring capability enables IT teams to identify hardware anomalies before they lead to system failures or downtime. Proactive diagnostics are especially valuable in mission-critical environments where server availability is essential for business continuity.

Automatic Performance

When genuine Smart Memory modules such as the P06029-K21 are installed, HPE ProLiant servers can automatically optimize memory settings. This includes adjusting memory timings, voltage parameters, and operating frequencies to match the server’s hardware configuration. Automatic optimization simplifies system deployment and ensures consistent performance across server clusters.

ECC Technology for Data Integrity

The HPE P06029-K21 memory module incorporates Error Correcting Code (ECC) technology, which plays a vital role in maintaining data accuracy in enterprise systems. ECC memory detects and corrects single-bit memory errors automatically, preventing corrupted data from affecting application performance or system stability. Memory errors can occur due to electrical interference, cosmic radiation, or hardware fluctuations. In non-ECC memory environments, these errors may cause application crashes or data corruption. ECC memory significantly reduces these risks by ensuring that minor memory errors are corrected in real time.

Importance of ECC in Enterprise Applications

Enterprise servers often run applications that require absolute data accuracy. Financial databases, scientific computing systems, and enterprise resource planning platforms rely on reliable memory to process sensitive information. The ECC functionality in the HPE P06029-K21 module ensures that these critical workloads operate without unexpected data integrity issues. ECC memory also improves system reliability by reducing the likelihood of system crashes caused by memory errors. This reliability is particularly important in environments where servers operate continuously for extended periods.

Continuous Error Detection and Correction

The ECC mechanism continuously monitors memory transactions for potential errors. When a single-bit error is detected, the system automatically corrects it without interrupting application processes. This real-time correction capability ensures that the server continues operating smoothly without requiring manual intervention.

Registered DIMM Architecture for Stability

The HPE P06029-K21 module uses Registered DIMM (RDIMM) architecture, which improves signal integrity and system stability in servers with large memory configurations. RDIMM modules include a register chip that buffers communication between the memory controller and the memory chips. This buffering reduces electrical load on the memory controller, allowing servers to support more memory modules without compromising performance. RDIMM technology is essential for enterprise servers that require high memory capacity. By stabilizing signal transmission, registered memory modules ensure reliable operation even when multiple DIMM slots are populated.

Improved Signal Integrity and Performance

In high-density server environments, electrical signals traveling between memory modules and the processor can experience interference or signal degradation. The register chip within RDIMM modules helps manage these signals, ensuring accurate communication between components. This improved signal integrity enables servers to maintain stable performance even when operating with large memory capacities. As organizations expand their server infrastructure, RDIMM technology becomes increasingly valuable for maintaining system reliability.

Large Memory Configurations

Enterprise workloads often require large memory pools to accommodate multiple applications and virtual machines. The RDIMM architecture used in the HPE P06029-K21 module allows administrators to install numerous memory modules across server channels. This capability enables scalable memory expansion while maintaining consistent performance.

CL22 Latency and Memory Timing

The CAS latency rating of CL22 represents the delay between a memory read request and the moment the requested data becomes available. While memory speed determines overall bandwidth, latency influences how quickly data can be retrieved from memory. The HPE P06029-K21 module balances high-frequency operation with optimized latency to deliver efficient performance. In enterprise workloads where large datasets are accessed frequently, balanced latency helps improve application responsiveness. Database queries, virtualization workloads, and analytics processes all benefit from efficient memory timing parameters.

Memory Timing Stability in Server Environments

Memory timing stability is crucial for maintaining consistent performance in enterprise systems. Servers often operate under heavy workloads that require predictable memory response times. The CL22 latency specification ensures that the HPE P06029-K21 module performs reliably within supported server configurations. Properly tuned memory timings also help prevent performance fluctuations that could impact application performance or user experience.

288-Pin DIMM Form Factor and Physical Design

The HPE P06029-K21 memory module features the standard 288-pin DIMM form factor used by DDR4 memory modules. This design ensures compatibility with modern server motherboards equipped with DDR4 DIMM slots. The 288-pin layout allows secure physical installation and efficient electrical connectivity. The module’s compact design enables multiple DIMMs to be installed within a server chassis without obstructing airflow or cooling systems. Proper physical design is essential in high-density server environments where efficient airflow is required to maintain optimal operating temperatures.

HPE ProLiant Server Platforms

The HPE P06029-K21 memory module is specifically designed for compatibility with HPE ProLiant server systems. These servers are widely used across enterprise data centers due to their reliability, scalability, and advanced management capabilities. By using genuine HPE Smart Memory, organizations ensure that their servers operate with components that have been fully validated for compatibility. Compatibility with HPE firmware and server management tools allows administrators to monitor memory performance and system health through integrated management platforms. This integration simplifies system maintenance and enhances overall infrastructure reliability.

Integration with Server

HPE ProLiant servers include advanced management technologies that provide real-time monitoring of hardware components. When Smart Memory modules like the P06029-K21 are installed, these tools can accurately detect memory configurations and provide detailed performance data. Administrators can use these insights to optimize server configurations, manage system resources, and ensure stable operation across the infrastructure.

High-Performance Enterprise Workloads

The HPE P06029-K21 16GB DDR4 3200MHz ECC RDIMM memory module is well suited for a wide range of enterprise workloads. Its high bandwidth and reliability make it an ideal choice for virtualization environments where multiple operating systems run concurrently on a single physical server. Virtual machines require dedicated memory resources to maintain performance and stability. By installing multiple 16GB modules across server channels, administrators can build scalable virtualization infrastructure capable of supporting numerous workloads simultaneously.

Database Servers and Transaction Processing

Database servers rely heavily on fast and reliable memory to process transactions and queries efficiently. The high-speed DDR4 architecture of the P06029-K21 module allows database engines to cache frequently accessed data in memory, reducing storage access delays. This capability improves query performance and supports faster transaction processing, which is essential for enterprise applications such as financial systems, customer relationship management platforms, and analytics tools.

Cloud Computing and Hosting Platforms

Cloud service providers and hosting platforms require reliable server memory to support large numbers of users and applications. The HPE P06029-K21 memory module delivers the performance and reliability needed to maintain consistent service levels in cloud environments. High memory bandwidth allows cloud servers to allocate resources efficiently, ensuring stable performance for hosted applications and virtual machines.

Enterprise Reliability and Quality Assurance

HPE maintains strict quality control standards for all server components, including memory modules. The P06029-K21 module undergoes rigorous testing procedures to ensure it meets enterprise reliability requirements. These tests include performance validation, thermal stress testing, and compatibility verification across multiple server platforms. Quality assurance testing ensures that each memory module can withstand the demands of continuous operation in enterprise data centers.