P24113-001 HPE Intel E810-CQDA2 100GBPS 2 Ports Ethernet QSFP28 OCP3 Mezzanine Adapter

Outline of HPE 100GBPS 2 Ports Ethernet OCP3 Adapter

The HPE P24113-001 Intel E810-CQDA2 Ethernet adapter is engineered for modern data centers that demand ultra-fast throughput, low latency, and scalable connectivity. Built around Intel’s advanced Ethernet controller architecture, this dual-port 100Gb solution delivers consistent bandwidth for enterprise, cloud, and edge deployments while maintaining efficiency under heavy workloads.

Main Specification

• Manufacturer: HPE
• Manufacturer Part Number: P24113-001
• Product Type: Network Adapter

Technical Specification

• Form Factor: Plug-in Card (OCP 3.0 Mezzanine)
• Interface: PCI Express 4.0
• Ports: Dual 100 Gigabit QSFP28
• Data Link Protocol: 100 Gigabit Ethernet

Form Factor and Bus Interface Highlights

• Plug-in card optimized for enterprise and hyperscale servers
• Open Compute Project Mezzanine (OCP) 3.0 compliance
• PCI Express 4.0 support for higher bandwidth and reduced latency
• Designed to maximize performance per watt

Port and Throughput Capabilities

• 2 × 100GbE QSFP28 ports
• Total data transfer rate up to 100 Gbps per port
• Optimized for east-west and north-south traffic patterns
• Ideal for virtualization, storage, and AI workloads

Supported Network and Transport Protocols

• TCP/IP for standard networking applications
• iSCSI for high-performance storage networking
• iWARP for RDMA over Ethernet deployments
• Optimized packet processing for low-latency communication

Supported HPE Systems

• HPE Edgeline E920 and E920d
• HPE ProLiant DL110 Gen10
• HPE ProLiant DL325 Gen10 and DL345 Gen10
• HPE ProLiant DL360 Gen10 and DL365 Gen10
• HPE ProLiant DL380 Gen10 and DL385 Gen10

Common Deployment Scenarios

• High-performance computing clusters
• Data center core and aggregation layers
• Virtualized enterprise networks
• Storage-heavy workloads requiring low latency

Benefits of 100Gb Ethernet Adapter

• Enterprise-class throughput with dual 100Gb ports
• Future-ready PCIe 4.0 interface
• Broad protocol compatibility for networking and storage
• Proven Intel Ethernet technology combined with HPE validation

Enterprise-Class OCP 3.0 Ethernet Mezzanine Adapters  

The HPE P24113-001 Intel E810-CQDA2 100GBPS 2 Ports Ethernet QSFP28 OCP3 Mezzanine Adapter belongs to a specialized category of enterprise networking hardware designed for modern data center servers that require extreme throughput, low latency, and seamless integration with next-generation platforms. This category focuses on Open Compute Project 3.0 mezzanine adapters that align with HPE server architectures while delivering carrier-grade Ethernet performance. OCP 3.0 mezzanine solutions are engineered to reduce PCIe slot consumption, optimize airflow, and improve power efficiency, making them ideal for dense compute environments where space, thermals, and scalability are critical considerations.

Within this category, adapters based on the Intel Ethernet Controller E810 family represent a shift toward highly programmable, cloud-optimized networking. These adapters are built to support advanced workloads such as hyperscale virtualization, software-defined networking, storage over Ethernet, artificial intelligence pipelines, and high-performance computing clusters. The category emphasizes hardware offload, secure packet processing, and deterministic performance, ensuring consistent network behavior under heavy traffic loads.

Intel E810 Controller Architecture  

The Intel E810 controller at the core of this category introduces a new generation of Ethernet silicon that prioritizes flexibility and speed. Designed for 100 Gigabit Ethernet environments, the controller supports two high-bandwidth QSFP28 ports, enabling aggregate throughput that meets the demands of east-west traffic in modern data centers. This architecture is built around advanced packet processing pipelines that minimize CPU involvement, freeing host processors for application-level tasks.

Adapters in this category leverage PCI Express Gen4 connectivity to ensure sufficient bandwidth between the network interface and the server. This is essential for sustaining line-rate performance across both ports without bottlenecks. The controller integrates intelligent queue management, traffic shaping, and flow steering capabilities that allow network administrators to fine-tune performance for specific workloads. These architectural features make the category particularly relevant for environments that require predictable latency and high packet-per-second rates.

Programmability and Dynamic Device Personalization

A defining characteristic of the Intel E810-based OCP 3.0 adapter category is its support for dynamic device personalization. This capability allows the adapter firmware to be customized for specific use cases, such as network function virtualization, storage traffic optimization, or telemetry-heavy monitoring environments. By enabling firmware-level adaptability, this category provides long-term value as network requirements evolve without necessitating hardware replacement.

Dynamic personalization also supports advanced features such as Application Device Queues and hardware-based flow classification. These capabilities allow traffic to be directed efficiently to specific CPU cores or virtual machines, reducing context switching and improving overall system responsiveness. As a result, the category appeals to enterprises seeking future-proof networking investments.

100 Gigabit Ethernet QSFP28 Connectivity 

The use of QSFP28 interfaces defines this category as a high-end networking solution suitable for large-scale deployments. QSFP28 connectivity supports multiple cable types and transceiver options, enabling flexibility in data center design. Whether deployed in top-of-rack, end-of-row, or spine-leaf architectures, adapters in this category can integrate seamlessly with existing infrastructure while supporting future upgrades.

Dual-port 100 Gigabit Ethernet configurations allow for redundancy, load balancing, or segmentation of network traffic. This is particularly valuable in mission-critical environments where uptime and performance consistency are paramount. The category supports advanced link aggregation and failover mechanisms that enhance network resilience without compromising throughput.

Compatibility with Modern Switching and Cabling Standards

Adapters within this category are designed to interoperate with a wide range of Ethernet switches and cabling solutions. Support for direct attach copper, active optical cables, and optical transceivers ensures that deployment scenarios can be optimized for cost, distance, and performance. This compatibility reduces deployment complexity and allows organizations to standardize on a single adapter category across multiple server platforms.

OCP 3.0 Mezzanine Form Factor Advantages

The OCP 3.0 mezzanine form factor is a cornerstone of this category, offering significant advantages over traditional add-in cards. By integrating directly onto the server motherboard through a dedicated mezzanine slot, these adapters reduce physical footprint and improve signal integrity. This design also enhances airflow within the server chassis, contributing to improved thermal performance and system reliability.

For HPE servers, the OCP 3.0 mezzanine category ensures mechanical and electrical compatibility that simplifies installation and maintenance. The standardized form factor allows for rapid deployment across large fleets of servers, making it an attractive option for data centers that prioritize operational efficiency.

Power Efficiency and Thermal Optimization

Power efficiency is a key consideration in this category, particularly as network speeds increase. The Intel E810-based adapters are engineered to deliver high performance per watt, reducing overall data center energy consumption. Advanced power management features dynamically adjust link power and processing resources based on traffic patterns, ensuring optimal efficiency during both peak and idle periods.

Thermal optimization is achieved through careful component placement and the inherent advantages of the mezzanine design. Improved airflow reduces the need for aggressive cooling, which can lower operational costs and extend hardware lifespan.

Virtualization and Cloud Workload Acceleration

This category is highly optimized for virtualization and cloud-native workloads. Support for Single Root I/O Virtualization enables efficient sharing of network resources among multiple virtual machines while maintaining isolation and performance guarantees. Hardware offload for virtual switching and tunneling protocols reduces CPU overhead and enhances scalability.

Cloud service providers and enterprises running private clouds benefit from consistent network performance across tenants. The category supports advanced Quality of Service mechanisms that prioritize critical traffic and ensure fair bandwidth allocation, even in highly consolidated environments.

Containerized and Microservices Environments

In containerized environments, network performance and latency can significantly impact application responsiveness. Adapters in this category provide the throughput and low-latency characteristics required for microservices architectures. Hardware-based packet processing accelerates service-to-service communication, supporting rapid scaling and dynamic orchestration.

Storage Networking and Data-Intensive Applications

The category is well-suited for storage networking scenarios that demand high bandwidth and low latency. Support for protocols such as NVMe over Fabrics and iSCSI over Ethernet enables efficient access to distributed storage resources. By offloading storage-related network processing to the adapter, host CPUs can focus on application logic and data processing.

Data-intensive applications such as analytics, machine learning, and real-time processing benefit from the consistent throughput provided by dual 100 Gigabit Ethernet ports. The category ensures that data flows remain uninterrupted, even under sustained heavy loads.

Telemetry and Visibility for Network Operations

Enhanced telemetry capabilities provide deep visibility into network performance and behavior. Adapters in this category support detailed statistics and monitoring features that integrate with modern network management platforms. This visibility enables proactive troubleshooting and capacity planning, reducing downtime and improving service quality.

Enterprise Reliability  

Reliability is a defining attribute of this category, with components designed for continuous operation in demanding environments. Extensive validation and testing ensure compatibility with HPE server platforms and enterprise operating systems. This focus on reliability reduces the risk of unexpected failures and simplifies support processes.

Deployment at Scale in Modern Data Centers

For organizations deploying networking hardware at scale, consistency and predictability are crucial. This category enables standardized configurations across server fleets, simplifying provisioning and reducing operational complexity. The combination of OCP 3.0 design, Intel E810 technology, and HPE integration makes it well-suited for large-scale rollouts.

Future-Ready Networking for Evolving Workloads

The HPE P24113-001 Intel E810-CQDA2 100GBPS 2 Ports Ethernet QSFP28 OCP3 Mezzanine Adapter category is positioned to support emerging technologies and evolving workload demands. As network speeds continue to increase and application architectures become more distributed, the need for adaptable, high-performance networking solutions will grow.