HPE P48063-001 1.92TB PCI Express 3.0 NVME Read Intensive 2.5inch SFF U.3 Bc Static Multi Vendor SSD.

Product snapshot — HPE 1.92TB Read-Intensive NVMe U.3 SSD

A high-density, hot-pluggable NVMe solid-state drive engineered for read-heavy workloads. This HPE-branded 1.92 terabyte U.3 SSD leverages PCIe 3.0 lanes to deliver low latency and predictable throughput for mainstream performance environments. Supplied with an HPE basic carrier, it’s optimized for server platforms that demand fast random reads and efficient power use.

Key specifications at a glance

• Drive type: Removable solid-state drive (hot-swap)
• Usable capacity: 1.92 TB
• Form factor: 2.5-inch SFF (U.3)
• Interface: U.3 (NVMe) over PCI Express 3.0
• Height profile: 0.6 inches (low-profile 2.5")
• Included: HPE basic drive carrier / tray

Performance profile — tailored for read-intensive tasks

Designed to excel where read throughput and IOPS matter most, this drive addresses database querying, virtualization read caches, content delivery, and analytics snapshots with consistent performance.

• 4KB random read IOPS: Up to 155,000 sustained.
• 4KB random write IOPS: Sustained up to 30,000.
• Peak 4KB random read capability: Burst potential to 700,000 IOPS.
• Peak 4KB random write capability: Maximum 30,000 IOPS.
• Drive class: Read-intensive / mainstream performance tier—balanced for reads with occasional writes.

Endurance & reliability figures

• Endurance (total writes): Approximately 3,424 TB write lifetime.
• DWPD (Drive Writes Per Day): Rated at 1 DWPD, suitable for steady, mostly-read scenarios with light to moderate writes.
• Enterprise readiness: Built with enterprise-grade components and firmware tuned for predictable behavior under sustained load.

Interface, expansion & connectivity

This SSD connects via a single U.3 NVMe interface, harnessing PCIe Gen3 link lanes to deliver high bandwidth with broad server compatibility. The 2.5" SFF design fits standard U.3 bays and hot-swap trays.

• Interface count: 1 × PCIe 3.0 (NVMe)
• Compatible bay: 2.5" SFF U.3 sockets (hot-plug support)
• Carrier compatibility: Supplied with HPE basic carrier—ready for HPE ProLiant and HPE SimpliVity chassis.

Power and thermal characteristics

• Typical power draw: ~11.9 W during active operation.
• Thermal design: Low-profile 2.5" package for efficient airflow in dense server arrays.
• Operational fit: Suited to data center trays with standard airflow and thermal management.

Platform compatibility & validated systems

This drive is validated for a range of HPE platforms to ensure plug-and-play behavior and firmware interoperability. It integrates seamlessly into modern HPE server ecosystems when installed in supported bays.

• Validated systems include:
  • HPE ProLiant DL325 Gen10 Plus V2 (2.5")
  • HPE ProLiant DL325 Gen10 Plus V2 — Base and Performance configurations
  • HPE ProLiant DL325 Gen10 Plus V2 for Weka (tracking variant)
  • HPE SimpliVity 325 Gen10 Plus V2 Node (2.5")
• Note: Always consult your server’s HCL/compatibility matrix for supported firmware pairings and carrier/tray orientation.

Ideal workloads & practical use cases

This drive excels in scenarios where read determinism and high random read rates deliver business value. Typical deployments include:

• Read-heavy databases and indexing engines
• Virtual desktop infrastructure (VDI) read caches
• Content distribution and media streaming nodes
• Analytics: accelerating read queries and report generation
• Backup staging areas and snapshot repositories where reads dominate

This HPE NVMe SSD

• Balanced cost-to-performance: Read-optimized architecture gives excellent read IOPS while keeping endurance and cost appropriate for mainstream deployments.
• Hot-swap convenience: 2.5" U.3 form factor with HPE carrier enables rapid replacement and maintenance without downtime in supported servers.
• Predictable latency: NVMe protocol and enterprise firmware reduce variability for latency-sensitive applications.
• Proven ecosystem fit: Validation with HPE ProLiant and SimpliVity systems reduces integration friction.

Deployment recommendations & best practices

• Firmware alignment: Keep drive firmware matched to the server manufacturer’s recommended revision to ensure optimal compatibility and stability.
• RAID and data protection: For critical data, use appropriate RAID configurations or software replication—remember read-intensive SSDs still benefit from redundancy strategies.
• Thermal planning: Ensure front-to-back airflow and free bay spacing in dense enclosures to maintain sustained performance.
• Monitoring: Implement SMART/NVMe monitoring and telemetry to track endurance consumption (TBW) and drive health metrics over time.

Packaging & service notes

• Included items: Drive with HPE basic carrier.
• Serviceability: Check HPE support contracts and warranty terms for coverage details and RMA processes.
• Integration tip: Use vendor-provided management tools to update firmware and view drive telemetry centrally.

Search-friendly keywords to help discovery

• HPE 1.92TB NVMe U.3 SSD
• HPE read-intensive 2.5" PCIe 3.0 drive
• 1.92TB hot-swap NVMe enterprise SSD
• HPE ProLiant compatible U.3 drive
• read-optimized SSD 1.92TB 155k IOPS

Quick comparison checklist

• Capacity vs. endurance: 1.92 TB with ~3,424 TBW — ideal where reads dominate.
• IOPS focus: Extremely strong random read capability; moderate write IOPS.
• FormFactor & fit: 2.5" U.3 hot-plug for HPE server bays.
• Power envelope: ~11.9 W — plan power/thermal budgets accordingly.