HMCG94AGBRA181N Hynix 64GB DDR5 RDIMM Dual Rank Memory Module PC5-44800, 1.1V

SK HYNIX HMCG94AGBRA181N 64GB DDR5 SDRAM Memory Module

Manufacturer Overview

• Brand: SK HYNIX
• Part Number: HMCG94AGBRA181N
• Product Type: 64GB DDR5 SDRAM Memory Module

Technical Specifications

• Memory Capacity: 64GB
• Memory Technology: DDR5 SDRAM
• Module Configuration: 1 x 64GB
• Chip Design: Dual Rank (2Rx4)
• Data Transfer Rate: 5600MT/s (DDR5-5600B-R / PC5-44800)
• Error Detection: ECC (Error-Correcting Code)
• Signal Processing Type: Registered
• CAS Latency: CL46
• Operating Voltage: 1.1V

Physical Characteristics

• Form Factor: RDIMM (Registered DIMM)

Performance Features

• This high-performance DDR5 memory module operates at a remarkable speed of 5600MT/s, providing rapid data access and processing capabilities.
• With ECC technology, it ensures data accuracy and integrity, making it ideal for critical applications where reliability is paramount.
• The registered design enhances signal integrity, allowing for increased memory capacity and improved overall system stability.
• The dual rank (2Rx4) architecture optimizes memory throughput, facilitating efficient data handling and multitasking.

Applications and Compatibility

• Designed for contemporary servers and workstations, this memory module meets the demands of high-performance computing environments.
• Compatible with systems that utilize 288-pin DDR5 RDIMM modules, ensuring versatility across various server configurations.
• Perfect for applications requiring substantial memory resources, such as virtualization, data analytics, and complex simulations.

Benefits in High-Performance Scenarios

• The extensive 64GB capacity supports resource-intensive tasks, enhancing the performance of applications such as large databases and enterprise-level software.
• Implementing ECC technology minimizes the risk of data corruption, ensuring smooth operation in mission-critical environments.
• The registered DIMM design allows for superior signal quality and enables the system to handle higher memory capacities effectively.

A Future-Proof Memory Solution

• This module is engineered to adapt to evolving data processing needs, ensuring compatibility with next-generation technologies.
• With an impressive bus speed of 5600MT/s, it effectively addresses the performance challenges of modern computing environments.
• Featuring ECC and a dual-rank design, it guarantees reliability and efficiency for demanding applications.

Voltage: 1.1V

Introduction

The Hynix 64GB DDR5 RDIMM Dual Rank Memory Module PC5-44800 is a high-performance memory module that offers various features to enhance your computing experience. One of the key features that sets this memory module apart is its low voltage requirement, with an operating voltage of just 1.1V. In this section, we will delve into the benefits and importance of this voltage feature for users.

Benefits of Low Voltage

Energy Efficiency

One of the primary advantages of the Hynix 64GB DDR5 RDIMM Dual Rank Memory Module's low voltage requirement is its energy efficiency. Operating at a lower voltage means that the memory module consumes less power compared to modules with higher voltage ratings. This results in reduced energy consumption, leading to lower electricity bills and a greener computing experience. By opting for this memory module with its 1.1V operating voltage, you can contribute towards a more sustainable environment while enjoying top-notch performance.

Heat Dissipation

Another significant benefit of the low voltage feature is its impact on heat dissipation. The Hynix DDR5 RDIMM Memory Module operates at a lower voltage than its predecessors, resulting in reduced heat generation during operation. This lower heat output improves overall system stability and longevity by preventing excessive heating that can lead to thermal throttling or system failures. Additionally, it allows for better overclocking potential as lower heat generation means better temperature management.

Compatibility

The low voltage requirement of 1.1V makes the Hynix 64GB DDR5 RDIMM Dual Rank Memory Module highly compatible with a wide range of systems and motherboards. Many modern motherboards are designed to support and optimize the performance of memory modules operating at lower voltages. By choosing this memory module with its 1.1V requirement, you can ensure seamless compatibility with your system and avoid potential issues that may arise when using higher voltage modules.

Importance of 1.1V Voltage

Future-Proofing

The Hynix 64GB DDR5 RDIMM Dual Rank Memory Module's 1.1V voltage is particularly important due to its aligning with the DDR5 memory standard. DDR5 is the latest generation of memory technology that offers significant improvements over its predecessors in terms of speed, capacity, and efficiency. By opting for a memory module that operates at 1.1V, you are future-proofing your system for upcoming upgrades and advancements in computing technology. This ensures that your system will remain compatible and perform optimally with newer DDR5-based systems down the line.

Enhanced Performance

The 1.1V voltage feature plays a crucial role in delivering enhanced performance. The lower voltage requirement allows for higher clock speeds and lower latency, resulting in faster data transfer rates and improved overall system responsiveness. Whether you are a gamer seeking smooth gameplay experiences or a professional requiring fast data processing capabilities, the Hynix 64GB DDR5 RDIMM Dual Rank Memory Module's low voltage feature contributes to unlocking the full potential of your system, ensuring snappy performance in demanding tasks.

Overclocking Potential

For enthusiasts and power users who like to push their systems to the limit, the 1.1V voltage feature holds great significance regarding overclocking potential. Overclocking involves increasing the clock speeds of various components, including memory modules, to achieve higher performance levels. The lower voltage requirement of this memory module allows for better thermal management during overclocking sessions, as less heat is generated compared to higher voltage modules. This enables users to push their systems further without encountering stability issues caused by excessive heat.

Power Savings

The 1.1V voltage feature is not only beneficial for performance enthusiasts but also for those concerned about power consumption and energy efficiency. As mentioned earlier, the low voltage requirement of this memory module results in reduced power consumption. This translates to long-term cost savings on electricity bills, especially for systems that are often under heavy load or run 24/7. Additionally, the lower power consumption contributes to a cooler and quieter operating environment, making it an ideal choice for users seeking energy-efficient solutions without compromising performance.

Conclusion

In conclusion, the Hynix 64GB DDR5 RDIMM Dual Rank Memory Module PC5-44800's low voltage requirement of 1.1V offers numerous benefits and holds great importance for users. From energy efficiency and heat dissipation to compatibility and future-proofing, this voltage feature enhances overall system performance while providing cost savings and a greener computing experience. Whether you are a casual user, professional, or enthusiast seeking top-notch memory performance, the Hynix DDR5 RDIMM Memory Module with its 1.1V voltage is an excellent choice that ticks all the boxes.