M393A1G40DB0-CPB2Q Samsung 8GB 2133MHz DDR4 Memory.

Samsung M393A1G40DB0-CPB2Q 8GB 2133MHz Memory

The Samsung M393A1G40DB0-CPB2Q DDR4 SDRAM Ecc Registered is equipped with a capacity of 8GB, making it an ideal choice for users who require a sufficient amount of memory for their computing needs. This capacity allows for smooth multitasking and efficient handling of demanding applications.The SAMSUNG 8GB DDR4 SDRAM Memory Module is designed to deliver reliable and high-speed performance for your computing needs.

Samsung M393A1G40DB0-CPB2Q 8GB Memory Overview

The Samsung M393A1G40DB0-CPB2Q 8GB 2133MHz PC4-17000 DDR4 SDRAM ECC Registered CL15 Memory Module is part of an enterprise-focused memory category designed to deliver operational stability, data integrity, and predictable performance for professional computing platforms. This category encompasses DDR4 registered DIMMs with error-correcting capabilities that are specifically engineered for servers, enterprise workstations, and data center infrastructures where uninterrupted operation is essential. Memory solutions within this category are optimized for long-term reliability rather than consumer-oriented performance tuning, making them suitable for mission-critical workloads.Enterprise DDR4 ECC registered memory addresses the increasing complexity of modern computing environments, where systems must support virtualization, cloud services, analytics, and transactional workloads simultaneously. The combination of DDR4 SDRAM technology, registered signal buffering, ECC protection, and validated timing characteristics such as CAS latency 15 ensures dependable behavior across diverse and demanding use cases.

DDR4 SDRAM Technology and Architectural Advantages

DDR4 SDRAM represents a significant advancement in memory technology, offering higher efficiency and scalability compared to previous generations. Modules in this category operate at 2133MHz, a frequency that aligns with a broad range of enterprise server platforms and processor architectures. This operating speed provides consistent throughput while maintaining electrical stability, which is a critical requirement for registered ECC memory configurations.The architectural enhancements of DDR4 include increased bank groups, improved command efficiency, and higher chip densities. These features allow enterprise systems to handle concurrent memory access requests more effectively, supporting multi-core processors and parallel workloads. The Samsung M393A1G40DB0-CPB2Q category leverages these improvements to provide reliable performance in environments where sustained operation and predictable behavior are more valuable than peak frequency metrics.

PC4-17000 Bandwidth Profile

The PC4-17000 classification defines the memory bandwidth capabilities of this category, delivering a balanced data transfer rate suitable for enterprise workloads. This bandwidth level supports efficient communication between processors and memory subsystems without introducing instability or excessive power consumption. Servers configured with PC4-17000 memory benefit from consistent throughput across prolonged periods of operation.This predictable bandwidth profile is especially important for applications such as databases, virtualization platforms, and enterprise middleware, where performance consistency directly affects service reliability and user experience.

Error-Correcting Code Functionality and Data Integrity

Error-correcting code technology is a core characteristic of this memory module category. ECC memory is designed to detect and correct single-bit errors in real time, as well as identify multi-bit errors that could compromise system stability. In enterprise environments, memory errors can lead to silent data corruption, system crashes, or unpredictable application behavior. ECC protection significantly reduces these risks by maintaining data accuracy at the hardware level.The Samsung M393A1G40DB0-CPB2Q category integrates ECC functionality directly into the memory module architecture, allowing error correction to occur transparently without affecting system performance. This feature is critical for workloads that require high levels of data integrity, including financial processing, healthcare systems, scientific computing, and enterprise databases.

ECC Impact on Long-Term System Stability

Over extended periods of operation, memory cells are exposed to electrical noise, thermal variation, and environmental factors that can cause bit errors. ECC memory mitigates these issues by continuously monitoring and correcting data stored in memory. This proactive approach enhances overall system stability and reduces the likelihood of unexpected downtime.For organizations that operate servers continuously, ECC registered DDR4 memory is a foundational component that supports reliable and predictable system behavior.

Registered DIMM Architecture and Signal Management

The registered DIMM design employed in this category includes a register that buffers command and address signals between the memory controller and the DRAM chips. This buffering reduces the electrical load on the memory controller, improving signal integrity and enabling support for higher memory capacities. Registered memory is essential for enterprise servers that populate multiple DIMM slots per channel.The Samsung M393A1G40DB0-CPB2Q memory module category benefits from this architecture by maintaining stable communication between the processor and memory even in densely populated configurations. This stability is crucial for large-scale servers that require extensive memory resources.

Advantages for High-Capacity Server Configurations

Registered memory allows servers to scale memory capacity without sacrificing reliability. By reducing signal degradation, this category supports configurations with multiple modules installed per channel. This scalability enables organizations to expand memory resources incrementally as workload requirements grow.The ability to scale memory efficiently supports long-term infrastructure planning and reduces the need for frequent hardware replacements.

CAS Latency 15 Timing Characteristics

CAS latency, often abbreviated as CL, represents the delay between a memory request and the availability of data. The CL15 timing characteristic of this memory module category provides a balanced approach to latency and stability. In enterprise environments, consistent and predictable latency is often more important than minimal latency values.The Samsung M393A1G40DB0-CPB2Q category is designed to maintain stable timing behavior under sustained workloads. This consistency supports applications that rely on predictable response times, such as transactional databases and real-time analytics platforms.

Latency Consistency in Enterprise Workloads

Enterprise applications often operate continuously and handle large volumes of concurrent transactions. Memory latency variability can introduce performance jitter that affects application responsiveness. By adhering to validated timing parameters, this category ensures that latency remains consistent even under heavy load.This predictability contributes to smoother application performance and improved quality of service.

8GB Capacity as a Modular Building Block

The 8GB capacity of this memory module category serves as a flexible building block for enterprise systems. While higher-capacity modules are available, 8GB registered ECC modules are commonly used in multi-module configurations to achieve optimal channel balance and redundancy. This modular approach allows organizations to tailor memory capacity precisely to their workload requirements.Using multiple 8GB modules can also improve memory interleaving, which enhances overall system performance and efficiency. This makes the category suitable for both entry-level and mid-range enterprise servers.

Multi-Channel Optimization Strategies

Modern server processors are designed to operate with multi-channel memory architectures. Memory modules in this category are optimized to function effectively in dual-channel, quad-channel, or higher configurations depending on platform support. Proper population of memory channels improves bandwidth utilization and reduces access contention.The Samsung M393A1G40DB0-CPB2Q category supports these configurations, enabling systems to achieve balanced and reliable memory performance.

288-Pin DDR4 DIMM Physical Standard

This category utilizes the standard 288-pin DDR4 DIMM form factor, ensuring compatibility with enterprise server motherboards. The physical design adheres to industry standards for pin layout, electrical characteristics, and mechanical dimensions. This standardization simplifies installation, maintenance, and upgrades across diverse server platforms.The robust construction of server-grade DDR4 DIMMs supports reliable operation in high-density environments where airflow and thermal management are critical considerations.

Thermal and Power Efficiency Considerations

DDR4 memory operates at a lower voltage compared to earlier generations, resulting in reduced power consumption and lower heat output. This efficiency is particularly important in data centers where energy usage and cooling costs are significant operational factors.The Samsung M393A1G40DB0-CPB2Q category is engineered to maintain stable operation within typical data center thermal envelopes, supporting continuous use without thermal degradation.

Samsung Semiconductor Quality and Manufacturing Standards

Samsung is a global leader in semiconductor manufacturing, and this memory module category reflects the company’s commitment to quality and reliability. Each module is produced using advanced fabrication technologies and undergoes rigorous testing to ensure compliance with enterprise specifications. This process minimizes variability and ensures consistent performance across large deployments.Samsung’s vertically integrated manufacturing capabilities allow for strict quality control at every stage, from DRAM chip production to final module assembly. This results in memory solutions that are trusted by enterprise system integrators and data center operators worldwide.

Validation and Compatibility Testing

Memory modules in this category are subjected to extensive validation processes, including electrical performance testing, thermal stress analysis, and compatibility verification with supported platforms. These tests ensure that each module meets reliability and performance requirements before deployment.Comprehensive validation reduces the risk of field failures and supports long-term system stability.

Enterprise Platform Compatibility and Ecosystem Integration

The Samsung M393A1G40DB0-CPB2Q DDR4 ECC registered memory category is designed for compatibility with a wide range of enterprise server platforms. Support is commonly found in systems based on Intel Xeon and similar server-class processors that require registered ECC memory. This compatibility ensures seamless integration into existing infrastructures.Adherence to JEDEC standards further enhances interoperability, allowing organizations to deploy this memory across diverse hardware ecosystems with confidence.

BIOS and Firmware-Level Optimization

Enterprise servers rely on BIOS and firmware to configure memory parameters automatically. This category is optimized to work within these frameworks, allowing systems to set appropriate timing, voltage, and ECC settings during initialization. Automated configuration reduces deployment complexity and minimizes the risk of misconfiguration.Consistent firmware support contributes to predictable memory behavior across supported platforms.

Database, Analytics, and Transactional Application

Enterprise databases and analytics platforms rely heavily on system memory for caching, indexing, and real-time processing. DDR4 ECC registered memory modules in this category provide the reliability required to maintain data consistency during intensive workloads. Error correction ensures that memory-related faults do not propagate into critical datasets.The balanced performance and latency characteristics of PC4-17000 CL15 memory support transactional applications that demand predictable response times.

Consistency for Business-Critical Operations

In business-critical systems, performance predictability is often more important than peak throughput. This category is optimized to deliver consistent memory behavior under load, reducing performance variability and supporting stable application operation.The Samsung M393A1G40DB0-CPB2Q category aligns with these requirements, making it suitable for enterprise-grade computing environments.

Lifecycle Longevity and Enterprise Deployment Planning

Enterprise IT infrastructures are designed for long deployment cycles, and memory modules in this category are produced with extended availability in mind. Lifecycle consistency ensures that compatible modules remain accessible for future expansions or replacements, simplifying maintenance planning.The durability and reliability of DDR4 ECC registered memory contribute to reduced downtime and lower maintenance costs over the system lifecycle.

Total Cost of Ownership Advantages

Although enterprise-grade memory may have a higher initial cost compared to consumer alternatives, the long-term benefits often result in a lower total cost of ownership. Reduced error rates, improved system stability, and minimized downtime translate into operational savings.The Samsung M393A1G40DB0-CPB2Q memory module category delivers sustained value through dependable performance and long-term reliability.

Data Center Efficiency and Reliability Focus

Modern data centers prioritize efficiency, scalability, and reliability to meet growing digital demands. DDR4 ECC registered memory modules in this category support these goals by offering stable performance under continuous operation. Improved power efficiency reduces energy consumption, while robust error correction enhances system resilience.The Samsung M393A1G40DB0-CPB2Q category is optimized for high-density server deployments where consistent memory behavior is essential for maintaining service availability and operational confidence.

Standards Compliance and Industry Alignment

This memory module category adheres to established industry standards, ensuring safe operation and broad compatibility. Compliance with JEDEC specifications guarantees that electrical, thermal, and mechanical characteristics meet defined requirements.Standards alignment simplifies qualification processes for system integrators and reinforces the role of this category as a dependable component within enterprise computing ecosystems.