WS-C2960PD-8TT-L Cisco Catalyst Ethernet Switch 8 Ports

Cisco WS-C2960PD-8TT-L Catalyst Ethernet Switch

The Cisco WS-C2960PD-8TT-L Catalyst Ethernet Switch is designed to deliver reliable Layer 2 switching with intelligent management features for modern business networks. This compact 8-port switch combines Fast Ethernet connectivity, integrated Power over Ethernet functionality, and a Gigabit uplink to support scalable and efficient LAN deployments. Built for performance, security, and simplified administration, it fits seamlessly into enterprise branch offices, small business infrastructures, and managed network environments.

General Information and Identification

• Manufacturer: Cisco
• Model Number: WS-C2960PD-8TT-L
• Product Category: Network Switch
• Switch Type: Managed Ethernet Switch
• Form Factor: Compact Catalyst Series

Network Port Availability

• Total Ethernet Ports: 8
• RJ-45 Fast Ethernet Ports: 8
• Gigabit Ethernet Uplink Port: 1
• Power over Ethernet Enabled Ports: 1

Expansion and Connectivity Options

• Eight Fast Ethernet interfaces for endpoint connectivity
• Dedicated Gigabit uplink for higher bandwidth aggregation
• Support for twisted pair cabling standards

Supported Media and Cable Standards

• Supported Media Type: Twisted Pair
• Cable Standard: Category 5 (Cat5)
• Ethernet Technology: Fast Ethernet

Ethernet Standards and Protocol Support

• 10Base-T Ethernet
• 10/100Base-T Fast Ethernet
• 10/100/1000Base-T Gigabit Ethernet (uplink)

Layer Support

• OSI Layer: Layer 2 Switching
• Optimized for LAN access and edge networking

Manageability Options

• Fully manageable Cisco Catalyst platform
• Centralized and distributed administration support

Supported Management Protocols

• Command Line Interface (CLI)
• Telnet access
• HTTP-based web management
• Syslog for event logging
• Dynamic Host Configuration Protocol (DHCP)
• Remote Monitoring (RMON)

Quality of Service and VLAN Capabilities

• IEEE 802.1p Quality of Service for traffic prioritization
• IEEE 802.1Q VLAN tagging and segmentation
• Improved bandwidth utilization for voice and data traffic

SNMP and Network Monitoring

• SNMP v1 support for basic monitoring
• SNMP v2 and v2c for enhanced performance
• SNMP v3 for secure network management
• Compatibility with CiscoWorks LAN Management Solution

System Memory

• Installed Memory: 64 MB
• Memory Type: DRAM

Flash Storage

• Flash Memory Capacity: 32 MB
• Used for firmware and configuration files

Power over Ethernet Support

• PoE-enabled RJ-45 Port: Yes
• Supports powered devices such as IP phones and access points
• Streamlined installation with reduced cabling requirements

Cisco WS-C2960PD-8TT-L Catalyst Series Ethernet Switch

The Cisco WS-C2960PD-8TT-L Catalyst 8 Ports Switch Ethernet belongs to the trusted Cisco Catalyst 2960 Series, a category widely recognized for delivering enterprise-grade Layer 2 switching performance, operational simplicity, and long-term reliability. This category focuses on compact yet powerful managed Ethernet switches designed to support secure, scalable, and energy-efficient network infrastructures. These switches are frequently deployed in branch offices, small enterprise environments, industrial workspaces, and edge network segments where space efficiency, intelligent power management, and robust switching features are essential.

The Catalyst 2960PD category emphasizes Power over Ethernet delivery, Gigabit Ethernet connectivity, and advanced network intelligence, enabling organizations to connect IP phones, wireless access points, surveillance cameras, and other network-powered devices while maintaining centralized control. With Cisco’s proven hardware architecture and IOS Software, this switch category supports consistent network policies, optimized traffic handling, and seamless integration into existing Cisco-based infrastructures.

Managed Ethernet Switching Architecture

The Cisco WS-C2960PD-8TT-L category is defined by a fully managed Ethernet switching architecture that allows administrators to configure, monitor, and control network behavior with precision. This category provides advanced management features through Cisco IOS, enabling granular control over VLANs, port configurations, and traffic prioritization. The managed nature of this category ensures predictable performance and reliable connectivity across all connected endpoints.

Centralized management capabilities within this category simplify network operations by allowing consistent policy enforcement across distributed environments. Administrators can implement standardized configurations, reduce misconfigurations, and maintain compliance with organizational networking standards. This approach is particularly valuable for organizations seeking dependable access-layer switching without the complexity of higher-layer routing platforms.

Layer 2 Switching Capabilities

Layer 2 functionality is a core characteristic of the Cisco WS-C2960PD-8TT-L Catalyst category. These switches support advanced switching features such as VLAN segmentation, MAC address learning, and efficient frame forwarding. This allows networks to be logically segmented for security, performance optimization, and operational efficiency while maintaining high-speed data transmission between devices.

The Layer 2 design ensures low latency and high throughput, making this category suitable for voice, video, and data convergence. By operating efficiently at the access layer, these switches help organizations build scalable network topologies that support both current and future connectivity demands.

Compact Form Factor and Deployment Flexibility

The Cisco WS-C2960PD-8TT-L category is engineered with a compact physical design that allows flexible deployment in space-constrained environments. This form factor supports installation in wiring closets, wall-mounted enclosures, desktop setups, and remote branch locations. Despite its compact size, the category delivers enterprise-class functionality without compromising performance or reliability.

Flexible deployment options make this category particularly suitable for distributed network architectures. Organizations can extend secure wired connectivity to remote offices, classrooms, retail locations, and industrial facilities while maintaining centralized control and consistent operational standards.

Silent and Energy-Efficient Operation

Energy efficiency is a key characteristic of the Cisco WS-C2960PD-8TT-L Catalyst category. Designed to reduce power consumption, these switches support intelligent power management features that adjust energy usage based on network activity. This approach not only reduces operational costs but also aligns with sustainability initiatives and green IT strategies.

Quiet operation further enhances deployment flexibility by allowing installation in noise-sensitive environments such as offices, healthcare facilities, and educational institutions. The combination of energy efficiency and silent performance makes this category well-suited for modern workspaces.

Power over Ethernet Capabilities

Power over Ethernet functionality is a central feature of the Cisco WS-C2960PD-8TT-L category. This capability enables the switch to deliver electrical power and data connectivity over a single Ethernet cable, simplifying installation and reducing the need for additional power sources. Devices such as IP phones, wireless access points, and security cameras can be powered directly through the switch, improving deployment efficiency.

The PoE-focused design of this category supports dynamic power allocation, ensuring that connected devices receive the appropriate power levels based on their requirements. This intelligent approach maximizes power availability while preventing overconsumption and enhancing overall network reliability.

Centralized Power Management

Centralized power control allows administrators to monitor and manage PoE usage across all ports. This enables proactive planning, efficient troubleshooting, and optimized resource allocation. By integrating power management into the switching infrastructure, this category helps organizations streamline network operations and reduce maintenance complexity.

Security and Access Control Features

Security is an integral aspect of the Cisco WS-C2960PD-8TT-L Catalyst switch category. These switches support advanced security mechanisms designed to protect the network edge from unauthorized access, threats, and vulnerabilities. By implementing robust access control policies, organizations can safeguard sensitive data and maintain regulatory compliance.

Security features within this category include port-level authentication, traffic filtering, and monitoring capabilities that help detect and mitigate potential risks. This proactive security approach strengthens the overall network posture and enhances trust in the access-layer infrastructure.

Network Segmentation and Policy Enforcement

Logical segmentation through VLANs allows organizations to separate traffic based on departments, applications, or user roles. This segmentation enhances security by limiting access to critical resources and reducing the attack surface. The Cisco WS-C2960PD-8TT-L category supports consistent policy enforcement across all connected devices, ensuring uniform security standards throughout the network.

Performance and Reliability Standards

High performance and reliability define the Cisco WS-C2960PD-8TT-L Catalyst category. Built with Cisco’s proven hardware components, these switches deliver consistent throughput, minimal packet loss, and dependable operation under varying network loads. This reliability is essential for supporting business-critical applications that demand uninterrupted connectivity.

The category is designed to operate continuously in demanding environments, ensuring long-term stability and reduced maintenance requirements. Cisco’s rigorous testing and quality assurance processes contribute to the durability and resilience of these switches.

Optimized Traffic Handling

Advanced traffic management capabilities enable efficient handling of diverse workloads, including voice, video, and data traffic. Quality of Service mechanisms prioritize latency-sensitive applications, ensuring clear voice calls and smooth video streaming even during peak network usage.

Scalability and Network Growth Support

The Cisco WS-C2960PD-8TT-L Catalyst category is built to support scalable network growth. As organizations expand, these switches can be seamlessly integrated into larger Cisco network architectures. Compatibility with Cisco management platforms and standardized configurations simplifies scaling while maintaining operational consistency.

This scalability makes the category suitable for evolving business environments where network demands change over time. Organizations can confidently invest in this switch category knowing it supports both current requirements and future expansion.

Integration with Cisco Ecosystem

Seamless integration with the broader Cisco ecosystem ensures interoperability with other Cisco switches, routers, and security appliances. This integration enables unified management, enhanced visibility, and streamlined troubleshooting across the entire network infrastructure.

Use Case Versatility Across Industries

The Cisco WS-C2960PD-8TT-L Catalyst switch category is versatile enough to support a wide range of industry applications. In enterprise offices, it provides reliable access-layer connectivity for employees and devices. In education environments, it supports classrooms, labs, and administrative networks with secure and manageable connectivity.

Healthcare facilities benefit from the category’s reliability and PoE capabilities to support medical devices and communication systems. Retail environments leverage the compact design and performance to connect point-of-sale systems, surveillance equipment, and wireless networks efficiently.

Long-Term Value and Investment Protection

By combining durability, performance, and advanced management features, the Cisco WS-C2960PD-8TT-L Catalyst category delivers long-term value. Organizations benefit from reduced downtime, simplified management, and lower total cost of ownership. Cisco’s ongoing software support and extensive documentation further enhance the longevity and usability of this switch category.