P14355-001 HPE 1.92TB Nvme Mainstream RI MLC SSD

HPE P14355-001 1.92TB NVMe Read Intensive MLC SSD

The HPE P14355-001 1.92TB NVMe Read Intensive Solid State Drive delivers exceptional performance and reliability for enterprise-grade workloads. Designed with Multi-Level Cell (MLC) NAND flash memory and a PCIe Gen3 x4 NVMe interface, this SSD ensures rapid data throughput, lower latency, and superior efficiency for data-intensive environments. It’s a perfect solution for HPE ProLiant BL460c Gen10 servers, providing a seamless balance between endurance, read speed, and cost-efficiency.

Product Details

• Manufacturer: Hewlett Packard Enterprise (HPE)
• Part Number: P14355-001
• Product Type: Internal Solid State Drive (SSD)

Technical Specifications

Speed Highlights

• Sequential Read: Up to 3300 MB/s
• Sequential Write: Up to 1250 MB/s
• Random Read (4KB): Up to 425,000 IOPS
• Random Write (4KB): Up to 54,500 IOPS
• Average Latency: 0.028 milliseconds

Reliability Features

• Digitally Signed Firmware (DSF): Ensures secure and authenticated firmware updates.
• High Endurance: Supports 4765TB written over its lifetime.
• Thermal and Power Management: Maintains stability under heavy workloads.
• Low Power Idle Mode: Reduces energy consumption during inactivity.

Power Metrics

• Idle Power: 2.42 Watts
• Random Read: 6.27 Watts
• Random Write: 6.27 Watts
• Sequential Read: 6.8 Watts
• Sequential Write: 6.55 Watts
• Maximum Power: 6.8 Watts

Advantages of NVMe Interface

• Higher bandwidth and lower latency than legacy interfaces.
• Direct communication with the CPU via PCIe lanes.
• Reduced command overhead improves transaction efficiency.
• Optimized for parallel I/O operations and multitasking workloads.

Recommended Applications

• Enterprise Data Storage and Management
• Virtualization Platforms (VMware, Hyper-V)
• Cloud Computing Environments
• Database Operations and Analytics
• High-Performance Computing (HPC)

HPE P14355-001 1.92TB NVMe Read Intensive Multi-Level Cell DSF Solid State Drive Overview

The HPE P14355-001 1.92TB NVMe Mainstream Performance Read Intensive Multi-Level Cell (MLC) DSF Solid State Drive is a cutting-edge storage solution designed for enterprises looking to maximize performance and reliability in their data-driven environments. With a capacity of 1.92TB, this NVMe SSD is optimized for read-intensive workloads, providing exceptional speed, endurance, and efficiency. Built on Multi-Level Cell (MLC) NAND technology and featuring Data-Set-Flash (DSF) capabilities, the P14355-001 delivers consistent performance across a wide range of demanding applications.

Applications of the HPE P14355-001 1.92TB SSD

The HPE P14355-001 SSD is designed to meet the needs of businesses that require high-performance storage for read-heavy workloads. Below are several key applications for this SSD:

Enterprise Data Centers

In data center environments, the HPE P14355-001 SSD serves as a reliable and high-performance storage solution for a wide range of applications. Data centers handle large volumes of data, and the fast read speeds of this SSD enable them to maintain optimal performance even as the demand for data access increases. Whether used for hosting websites, providing cloud services, or supporting big data analytics, this SSD ensures quick access to information, reducing latency and improving system efficiency.

Environments

Virtualization environments rely heavily on fast, consistent storage to ensure the smooth operation of virtual machines (VMs). The HPE P14355-001 SSD is well-suited for virtualized data storage, providing the high-speed data access needed to power virtual machines while maintaining system responsiveness. It helps minimize VM boot times, reduces latency in virtualized workloads, and boosts overall system efficiency, making it an ideal choice for enterprises running hypervisors like VMware, Microsoft Hyper-V, and others.

Database Management Systems

Database systems, particularly those that are heavily read-oriented, benefit greatly from the read-intensive capabilities of the P14355-001. The SSD can significantly speed up data retrieval times for relational and non-relational databases, such as MySQL, SQL Server, and MongoDB. By providing rapid access to large datasets, the SSD helps database administrators ensure that queries are executed quickly, improving overall performance and response times for users and applications accessing the database.

Content Delivery Networks (CDNs)

Content Delivery Networks (CDNs) rely on high-performance storage to deliver fast access to websites, media, and other digital content across global networks. The HPE P14355-001’s fast read speeds and large storage capacity make it an excellent choice for caching frequently accessed content. This SSD can handle the heavy read operations required in CDN environments, reducing the time it takes for content to be delivered to end-users, improving customer experiences, and reducing load times for websites and media streams.

NVMe Technology in the HPE P14355-001 SSD

The NVMe (Non-Volatile Memory Express) interface is a major factor in the performance of the HPE P14355-001 SSD. This next-generation interface significantly outperforms older storage protocols such as SATA and SAS, providing a substantial improvement in speed, latency, and scalability. Below are some of the key advantages of the NVMe protocol:

Higher Bandwidth 

NVMe SSDs, like the HPE P14355-001, are built to take full advantage of the high-bandwidth capabilities of the PCIe bus. This enables significantly faster read and write speeds than SATA or SAS SSDs. The P14355-001’s PCIe Gen 3.0 x4 interface allows for greater data throughput, making it ideal for high-performance applications where large datasets are accessed frequently.

Lower Latency and Faster Response Times

NVMe’s streamlined architecture and efficient command set allow for lower latency, which is especially beneficial for applications that require rapid access to data. The HPE P14355-001’s NVMe interface ensures that the SSD can quickly respond to system requests, reducing delays and improving overall system performance, especially in environments with high IOPS (Input/Output Operations Per Second) requirements.

Improved Scalability

NVMe technology offers excellent scalability, allowing for increased storage performance as the demand for data access grows. As businesses scale their operations and the volume of data increases, NVMe SSDs like the P14355-001 can handle the growing demands without sacrificing performance. This scalability is critical in dynamic, data-driven environments, such as those found in enterprise and cloud-based infrastructure.

Multi-Level Cell (MLC) NAND Technology

The Multi-Level Cell (MLC) NAND used in the HPE P14355-001 SSD is an ideal choice for read-intensive workloads. MLC NAND stores more than one bit per cell, which increases storage density and provides a balance between cost and performance. For enterprises that need a storage solution capable of handling high read operations without the cost of high-end Single-Level Cell (SLC) NAND, the HPE P14355-001 provides the perfect compromise between speed and affordability.

Performance for Read-Intensive Applications

MLC NAND is particularly well-suited for applications where read operations dominate, such as web hosting, video streaming, and data analytics. The HPE P14355-001 can handle these workloads efficiently, providing fast access to frequently accessed data while maintaining endurance and reliability over time. With its fast read speeds and high IOPS capabilities, the SSD ensures that businesses can meet the demands of their customers and users.

Endurance and Reliability

While MLC NAND has a lower write endurance than SLC NAND, it is still a reliable option for read-intensive workloads. The HPE P14355-001 is built to withstand the heavy read operations typically required by enterprise applications. Its robust design ensures that it will perform consistently over a long lifespan, even under the high demands of data centers and cloud environments. The drive’s endurance is further bolstered by its advanced wear leveling algorithms, which optimize the distribution of write operations and extend the life of the NAND cells.

Data-Set-Flash (DSF) Technology

The HPE P14355-001 features Data-Set-Flash (DSF) technology, which optimizes the performance of the SSD in read-heavy environments. DSF improves data access speeds and reduces latency, ensuring consistent and reliable performance. This technology is particularly useful in data centers, virtualized environments, and high-performance computing applications, where fast data access is critical for maintaining system uptime and performance.

Minimized Latency for Time-Sensitive Applications

One of the key advantages of DSF is its ability to reduce latency, which is particularly beneficial in applications that require near-instantaneous data access. By minimizing the delay between data requests and the retrieval process, DSF ensures that the HPE P14355-001 performs optimally in time-sensitive applications, such as real-time data analytics and online transaction processing (OLTP