HPE 782996-001 480GB SATA 6GBPS 2.5inch Internal Solid State Drive

HPE 782996-001 480GB SATA 6GBPS SFF SSD Overview

The HPE 782996-001 480GB SATA 6Gbps 2.5-inch Internal Solid State Drive represents a reliable enterprise-grade storage solution engineered for exceptional data access speed, durability, and efficiency in data center and business environments. Designed to deliver consistent performance for Hewlett Packard Enterprise ProLiant servers, storage systems, and workstations, this SSD leverages advanced NAND flash memory technology and a SATA 6Gbps interface to provide faster data throughput, reduced latency, and enhanced energy efficiency compared to traditional hard drives. It is a storage drive tailored to meet modern IT workloads that require both performance and dependability, making it an ideal choice for virtualization, database processing, and read-intensive applications.

High-Speed SATA 6Gbps Interface

The SATA 6Gbps interface of the HPE 782996-001 480GB SSD ensures consistent data flow, allowing it to deliver sequential read and write speeds that significantly reduce bottlenecks in server environments. The 6Gbps bandwidth allows high-speed communication between the drive and the system controller, enabling faster boot times, reduced data access latency, and smoother multitasking for enterprise applications. This makes it an essential component for environments where high I/O performance is necessary for efficient operation. The SSD’s optimized command queuing and low response time further enhance throughput, ensuring smooth scalability and operational continuity even under demanding workloads.

Optimized for Enterprise Server Applications

This drive is specifically optimized for use in HPE ProLiant and HPE server systems where reliability and endurance are critical. Enterprise workloads require consistent performance over long operational periods, and the HPE 782996-001 addresses this by balancing high-speed operations with endurance and thermal efficiency. Unlike consumer SSDs, it is built with firmware optimized for sustained performance in enterprise conditions, making it suitable for mixed workload scenarios involving both random and sequential operations. The SSD ensures system stability and reduces potential downtime, which is vital for maintaining business productivity and service quality.

Advanced NAND Flash Memory Technology

The internal architecture of the HPE 782996-001 is built on advanced multi-level cell (MLC) NAND flash technology, which provides a perfect balance between capacity, reliability, and cost-effectiveness. The MLC NAND flash supports intensive read operations while maintaining durability and consistent write endurance. It enables the SSD to withstand large volumes of data writes without degradation in speed or reliability, supporting the long-term operation of critical business applications. The flash memory technology also minimizes power usage and heat generation, contributing to a lower total cost of ownership for enterprises deploying multiple drives across servers and storage arrays.

2.5-Inch Small Form Factor for Space Efficiency

The 2.5-inch form factor of the HPE 782996-001 provides flexibility for data center and enterprise installations. Its compact size allows it to fit into standard drive bays, optimizing the use of available space within server racks and enclosures. Despite its smaller dimensions, the drive offers substantial storage capacity, which helps IT managers to achieve higher data density within a smaller footprint. The drive’s form factor also contributes to better airflow and cooling efficiency, allowing the system to maintain optimal operating temperatures even during continuous operation under high load.

Ideal for Rack and Tower Server Configurations

HPE designed this 2.5-inch SATA SSD to be compatible with a wide range of ProLiant server configurations, including both rack-mounted and tower models. Its compatibility with hot-swap drive bays allows for easy replacement or upgrades without disrupting system uptime. Whether deployed in an HPE ProLiant DL, ML, or Apollo series server, this drive delivers consistent performance and reliability, ensuring that organizations can depend on uninterrupted operation for critical workloads. Its integration also supports hybrid storage architectures, combining SSD speed with HDD capacity to balance performance and cost.

Improved Data Access and Response Time

By eliminating the mechanical latency inherent in spinning drives, the HPE 782996-001 provides near-instantaneous data access. The SSD architecture allows it to achieve millisecond-level response times, significantly accelerating application loading, data indexing, and transaction processing. In environments where response time directly affects service delivery—such as online transaction systems, web servers, and real-time analytics—the improvement in access latency can translate into measurable gains in performance and user experience.

Reliability and Endurance for Continuous Operations

Reliability is one of the defining features of the HPE 782996-001 480GB SSD. Designed for enterprise-class duty cycles, it offers enhanced durability through error correction technologies, wear-leveling algorithms, and power-loss protection features. These elements work together to maintain data integrity and drive stability throughout the device’s lifespan. HPE’s rigorous quality control ensures each drive meets high endurance metrics, often measured in drive writes per day (DWPD), meaning it can handle frequent write operations typical in enterprise workloads.

Enhanced Data Protection and Error Correction

The SSD is equipped with advanced error correction code (ECC) technology that continuously monitors and corrects bit-level errors. This proactive error management prevents data corruption and ensures reliable read and write operations even under heavy use. Additionally, HPE’s power-loss protection feature ensures that in the event of an unexpected power failure, in-flight data is safely stored in non-volatile memory, minimizing the risk of data loss. These combined protections contribute to the drive’s high reliability rating and make it suitable for mission-critical deployments.

End-to-End Data Path Protection

End-to-end data path protection safeguards data integrity as it moves from the host system to the NAND storage cells. This comprehensive protection ensures that every bit of information written or read remains accurate and uncompromised, reducing the likelihood of data corruption caused by transmission errors. Such mechanisms are essential for applications involving sensitive financial transactions, healthcare data, or confidential enterprise records, where accuracy and integrity are paramount.

Wear-Leveling and Longevity

The HPE 782996-001 utilizes dynamic and static wear-leveling algorithms that distribute write and erase cycles evenly across all NAND cells. This technique extends the lifespan of the drive by preventing any particular section of the memory from wearing out prematurely. As a result, enterprises benefit from consistent performance over a longer period, making the drive a cost-effective investment in long-term infrastructure planning.

Performance Characteristics

Performance is a hallmark of the HPE 782996-001 SSD, with read and write speeds designed to meet the demands of data-intensive applications. The SATA 6Gbps interface combined with HPE’s proprietary firmware enables sustained throughput and low latency for both sequential and random operations. Such performance characteristics are especially beneficial in virtualized environments and database systems that rely on quick data access and minimal delays.

Sequential and Random Read/Write Performance

The drive delivers sequential read speeds that dramatically improve system boot times, file transfers, and loading of large datasets. Random read/write operations, which are critical for transactional workloads, are also significantly faster compared to traditional hard drives. These improvements allow organizations to achieve smoother performance across applications that require simultaneous access to multiple data streams, such as virtualization platforms and online analytical processing systems.

ProLiant Server Compatibility

This SSD supports a wide range of HPE ProLiant models, including DL and ML series servers, as well as select BladeSystem enclosures. Its compatibility with HPE Smart Array RAID controllers ensures flexibility in configuring RAID levels for redundancy and performance optimization. The ability to integrate with these enterprise-grade systems guarantees that organizations can deploy the drive within existing architectures without requiring complex reconfiguration or additional hardware.

Optimized Thermal Control

With reduced heat output, the HPE 782996-001 operates reliably even in dense rack configurations. Its design facilitates better airflow through the drive bays, preventing thermal throttling and maintaining stable performance during extended workloads. The SSD’s ability to remain within safe temperature thresholds ensures long-term stability and reduces the risk of performance degradation or component failure due to overheating.

Scalable Storage Solution

Enterprises can deploy multiple HPE 782996-001 drives to scale performance or capacity as required. The compatibility with HPE’s modular systems makes it easy to expand storage infrastructure in line with business growth. Whether used as part of a primary storage array or as a caching layer to accelerate HDD-based storage systems, it offers scalability and flexibility that align with evolving enterprise storage demands.