10G-SFPP-TX-LP-A Ruckus 10GBASE-T SFP+ Compatible Copper Transceiver

Product Overview of the Ruckus 10G-SFPP-TX-LP-A Transceiver

The Ruckus 10G-SFPP-TX-LP-A is a high-performance 10GBASE-T SFP+ compatible copper transceiver designed for reliable and efficient short-range network connectivity. It enables stable 10 Gigabit Ethernet transmission over standard copper cabling, making it an ideal solution for enterprise networks, data centers, and high-speed switching environments.

General Information

• Manufacturer: Ruckus
• Manufacturer Part Number: 10G-SFPP-TX-LP-A
• Device Type: SFP+ Copper Transceiver Module

Technical Specifications

Performance

• Maximum Data Transfer Speed: 10 Gbps
• Connectivity Technology: Wired Ethernet
• Maximum Transmission Distance: Up to 30 meters

Interface & Connectivity

• Connector Type: RJ-45
• Form Factor: SFP+
• Cabling Support: Cat6a / Cat7 copper cables

Network Standards & Protocol Support

Supported Data Link Protocol

• 10 Gigabit Ethernet (10GBASE-T)

The transceiver is optimized for high-speed Ethernet networking and ensures consistent data flow with minimal latency.

Compatibility

Supported Ruckus Network

The Ruckus 10G-SFPP-TX-LP-A copper transceiver is fully compatible with Ruckus switches and network equipment that feature SFP+ ports supporting 10GBASE-T modules.

• Ruckus ICX Series Switches
• Ruckus ICX 7150 Switch Series
• Ruckus ICX 7250 Switch Series
• Ruckus ICX 7450 Switch Series
• Other Ruckus switches with supported SFP+ slots

The Ruckus 10G-SFPP-TX-LP-A 10GBASE-T SFP+ Transceivers

The Ruckus 10G-SFPP-TX-LP-A 10GBASE-T SFP+ Compatible Copper Transceiver category represents a specialized segment of high-speed networking components designed for enterprise, data center, campus, and service provider environments. These transceivers enable 10 Gigabit Ethernet connectivity over standard copper cabling, delivering flexibility, cost-efficiency, and performance reliability for modern network architectures. By leveraging the SFP+ form factor and 10GBASE-T standards, this category addresses the growing demand for scalable, high-throughput network links without requiring a full transition to fiber infrastructure.

This category focuses on low-power, short-reach copper transceivers that are engineered to meet strict compatibility and performance requirements when deployed in Ruckus networking equipment and compatible platforms. Designed to support high-density switching environments, these modules allow organizations to extend or upgrade existing copper-based networks while maintaining consistent 10GbE speeds.

Understanding 10GBASE-T SFP+ Copper Transceiver

10GBASE-T SFP+ Transceiver

A 10GBASE-T SFP+ transceiver is a compact, hot-pluggable networking module that converts electrical Ethernet signals into a form suitable for transmission over twisted-pair copper cables, typically Cat6a or Cat7. Unlike optical transceivers that rely on fiber, copper transceivers operate using familiar RJ-45 connectors, simplifying installation and reducing overall deployment costs.

The SFP+ form factor ensures compatibility with a wide range of switches, routers, and network interface cards that support 10GbE. This makes the category especially attractive for environments seeking flexibility and easy upgrades without replacing core networking hardware.

The Ruckus 10G-SFPP-TX-LP-A

Products within this category are designed to comply with IEEE 802.3an standards for 10GBASE-T Ethernet. This compliance ensures consistent performance, predictable latency, and reliable link negotiation across supported network devices. Interoperability testing plays a critical role, allowing these transceivers to function seamlessly within Ruckus environments and compatible third-party platforms.

Hot-Pluggable

One of the defining features of SFP+ copper transceivers is their hot-pluggable nature. Network administrators can install, remove, or replace modules without powering down equipment. This modularity supports rapid maintenance, network reconfiguration, and scalability, reducing downtime and operational disruption.

Use Cases and Deployment

Enterprise Network

Organizations upgrading from Gigabit Ethernet to 10 Gigabit Ethernet often face challenges related to cabling infrastructure. The Ruckus 10G-SFPP-TX-LP-A compatible category enables enterprises to reuse existing high-quality copper cabling, avoiding the cost and complexity of fiber installation while achieving significant performance improvements.

Data Center

In data center environments, these copper transceivers are frequently used for short-reach top-of-rack (ToR) connections. They provide reliable 10GbE links between servers and switches over short distances, typically up to 30 meters, depending on cable quality. This makes them ideal for high-density server deployments where cost control and simplicity are priorities.

Advantages of Copper SFP+ Transceivers

Flexible Network

Copper transceivers allow network architects to design flexible layouts that accommodate both legacy and modern devices. This adaptability is particularly useful during phased upgrades or hybrid network deployments.

Performance and Best Practices

Cable Quality and Distance Limitations

Achieving optimal performance with 10GBASE-T transceivers depends heavily on cable quality. Cat6a or higher cabling is recommended to ensure full 10GbE speeds and minimize signal degradation. Shorter distances typically result in lower power consumption and improved reliability.

Comparing Copper and Fiber SFP+ Transceivers

Products within this category are manufactured using high-quality components designed for continuous operation. Rigorous testing processes help ensure consistent signal integrity, durability, and compliance with industry standards. Educational institutions rely on high-bandwidth networks to support digital learning, research computing, and campus-wide connectivity. Copper 10GbE transceivers provide a practical upgrade path for existing infrastructure.