MTC10F1084S1RC64BH1 Micron 16GB DDR5 6400MHz PC5-51200 CL52 Memory

Overview of Micron MTC10F1084S1RC64BH1 16GB Memory

The MICRON 16GB DDR5-6400 ECC Registered RDIMM memory module is engineered to enhance server-class systems that demand dependable performance, improved bandwidth, and enterprise-level stability. Designed for data centers, virtualization platforms, and mission-critical workloads, this DDR5 RDIMM delivers consistent throughput while maintaining data accuracy under heavy operational loads.

General Information

• Manufacturer: Micron 
• Part Number: MTC10F1084S1RC64BH1
• Product Type: Memory Module

Technical Specifications

• Memory Capacity: 16GB
• Memory Type: DDR5 SDRAM
• Form Factor: Registered DIMM (RDIMM)
• Error Correction: ECC Supported
• Data Rate: 6400 MT/s
• Latency: CL52
• Rank Configuration: 1Rx8
• Operating Voltage: 1.1V

DDR5 ECC Registered Server Memory Category Overview

The DDR5 ECC Registered DIMM memory category represents a critical evolution in enterprise-grade system memory, designed to support the increasing demands of modern data centers, cloud infrastructures, virtualization platforms, AI workloads, and high-performance computing environments. Products within this category, including the MICRON MTC10F1084S1RC64BH1 16GB DDR5 6400MHz ECC Registered DIMM, are engineered to deliver higher bandwidth, improved reliability, enhanced power efficiency, and superior scalability compared to previous DDR generations. This category focuses on stability-driven performance, ensuring consistent operation under sustained workloads and mission-critical conditions.

16GB Module Capacity 

A 16GB DDR5 ECC Registered DIMM represents a flexible building block for scalable memory configurations. While higher-capacity modules are available, 16GB modules remain relevant for balanced system designs, test environments, edge servers, and cost-effective enterprise deployments.By combining multiple 16GB RDIMMs, organizations can achieve tailored memory capacities that align with workload requirements and budget constraints. This modular approach simplifies capacity planning and allows incremental upgrades as application demands evolve.

DDR5 Memory Technology

DDR5 memory introduces a significant leap forward in memory architecture, addressing the limitations of DDR4 while preparing platforms for future scalability. Operating at substantially higher transfer rates, DDR5 enables faster data access and improved throughput, which is essential for compute-intensive applications. Memory modules in this category, such as 6400MHz PC5-51200 DIMMs, deliver exceptional bandwidth that supports parallel processing, real-time analytics, and advanced virtualization.

Enhanced Power Management and Efficiency

Power efficiency is a defining characteristic of the DDR5 memory category. Operating at a reduced voltage of 1.1V, DDR5 RDIMMs consume less power while delivering higher performance. Integrated Power Management ICs (PMICs) on the module itself allow for more precise voltage regulation, reducing power loss and improving thermal stability. This design is particularly advantageous in dense server environments where energy efficiency directly impacts operational costs and cooling requirements.

ECC Registered Memory

ECC functionality is a defining feature of this memory category, providing automatic detection and correction of single-bit memory errors. In mission-critical systems, even minor data corruption can lead to system crashes, data loss, or security vulnerabilities. ECC memory actively mitigates these risks by ensuring data integrity during read and write operations.DDR5 ECC Registered DIMMs are particularly valuable in enterprise servers running databases, financial systems, virtualization platforms, and cloud services. By preventing silent data corruption, ECC memory enhances system reliability, supports regulatory compliance, and ensures consistent application performance under continuous load.

DDR5 Performance and Bandwidth Advantages

With a blazing-fast data rate of 6400 MT/s, this DDR5 memory module significantly improves data transfer efficiency compared to previous generations. The higher bandwidth allows servers to process large datasets faster, reducing latency in compute-intensive applications such as databases, cloud services, and analytics platforms.

Single Rank 1Rx8 Memory Configuration

The 1Rx8 single-rank design ensures efficient memory access while maintaining compatibility with a wide range of server platforms. This configuration balances performance and stability, making it suitable for systems that require predictable memory behavior and consistent throughput.

Latency and Power Efficiency

Operating at CL52 latency, this DDR5 RDIMM offers a balanced combination of speed and responsiveness. The low operating voltage of 1.1V helps reduce power consumption, contributing to improved energy efficiency and lower thermal output in data center environments.

Registered DIMM (RDIMM) Signal Stability

Registered DIMMs utilize a register to buffer command and address signals, reducing the electrical load on the memory controller. This design enables servers to support more memory modules per channel and achieve higher overall memory capacity without compromising stability. In high-density server configurations, RDIMMs are essential for maintaining signal integrity at high operating frequencies such as DDR5-6400.

High Bandwidth PC5-51200 Memory

Memory modules in the DDR5-6400 PC5-51200 category are designed to provide exceptional data transfer rates, supporting advanced workloads that demand rapid memory access. With a theoretical bandwidth of up to 51.2GB/s per module, this category significantly enhances system responsiveness and throughput compared to lower-speed alternatives.High bandwidth is particularly beneficial for applications such as real-time data analytics, AI model training, scientific simulations, and large-scale virtualization. By minimizing memory bottlenecks, DDR5-6400 ECC Registered memory enables CPUs to operate at maximum efficiency, ensuring optimal utilization of processing resources.

Latency CL52 and Timing

CAS latency plays a crucial role in overall memory performance, balancing speed and responsiveness. While DDR5 modules operate at higher latencies compared to DDR4, the increased frequency and architectural improvements offset these differences. A CL52 timing at 6400MHz is optimized for enterprise workloads, delivering consistent performance under sustained operations.

Memory Module Design and Configuration

1Rx8 Single-Rank Organization

Single-rank (1Rx8) memory modules feature one rank of memory chips organized with an x8 data width. This configuration offers a balance between performance, power efficiency, and compatibility with enterprise server platforms. Single-rank designs can contribute to improved signal integrity and reduced power consumption, particularly in high-frequency DDR5 environments.The 1Rx8 configuration is commonly supported across a wide range of server motherboards, making it a versatile choice for system upgrades and new deployments. It allows for predictable performance scaling and simplified memory population strategies.

288-Pin DDR5 DIMM Form Factor

DDR5 ECC Registered memory modules utilize the industry-standard 288-pin DIMM form factor, ensuring compatibility with modern server and workstation motherboards designed for DDR5 technology. The physical layout includes keying changes compared to DDR4, preventing incorrect installation and ensuring proper electrical alignment.The standardized DIMM design simplifies integration into enterprise systems, enabling IT teams to deploy and maintain memory upgrades efficiently. Robust PCB construction and high-quality components further enhance durability and long-term reliability.

Optimized for Multi-DIMM Configurations

Registered DIMMs are specifically designed to perform optimally in multi-DIMM per channel configurations. This capability is essential for servers that require large memory footprints to support virtualization, containerization, and in-memory databases.DDR5 ECC Registered memory ensures stable operation even when multiple modules are installed, enabling enterprises to maximize memory density without compromising performance or reliability.

Compatibility with Modern Server Platforms

Support for Latest CPU Architectures

DDR5 ECC Registered memory is engineered to work seamlessly with the latest server CPU architectures that support DDR5 technology. These processors leverage higher memory bandwidth to improve multi-threaded performance, accelerate data processing, and enhance overall system efficiency.Compatibility with modern chipsets ensures that this memory category can be deployed in cutting-edge server platforms, providing a future-ready foundation for enterprise infrastructure.

Thermal Stability and Long-Term Durability

High-frequency DDR5 memory generates heat under sustained load, making thermal stability a critical design consideration. Enterprise-grade DIMMs are constructed with high-quality materials and optimized layouts to dissipate heat effectively and maintain stable operation.Improved thermal performance contributes to longer component lifespan and reduces the risk of performance throttling, ensuring consistent system behavior in demanding environments.

Balanced Performance

This memory category delivers a balanced combination of performance, power efficiency, and reliability. By addressing the needs of modern enterprise workloads, DDR5 ECC Registered DIMMs provide a robust foundation for scalable, high-performance systems.Organizations benefit from improved operational efficiency, reduced downtime, and enhanced application responsiveness, making DDR5 ECC Registered memory a strategic component in enterprise IT environments.