MEM-DR564MT-ER56 Supermicro 64GB 5600MHz Pc5-44800 Memory

Overview of the 64GB Memory

DDR5 technology introduces a generational shift in memory performance and efficiency. The PC5-44800 classification indicates a theoretical bandwidth of 44.8 GB/s per module, a significant leap over prior DDR4 standards. Within this category, memory modules operate at 5600MT/s, enabling servers to feed data-hungry processors with minimal bottlenecks. Higher transfer rates support faster transaction processing, real-time analytics, and compute-intensive applications, making this memory class well-suited for contemporary enterprise workloads.

General Information

• Manufacturer: Supermicro
• Model Identifier: MEM-DR564MT-ER56
• Memory Type: 64GB Memory

Key Features

• Total Memory Size: 64GB per module
• Module Configuration: 1 × 64GB single DIMM
• Optimized for memory-heavy virtualization and database workloads
• Memory Standard: DDR5 SDRAM
• Effective Speed: 5600MHz
• Bandwidth Rating: PC5-44800 / DDR5-44800
• Improved data throughput for latency-sensitive applications
• CAS Latency: CL46 for balanced speed and stability
• Rank Structure: 2Rx4 dual-rank layout
• Enhanced parallel processing and multitasking efficiency

Enterprise DDR5 Server Memory

The category encompassing the MEM-DR564MT-ER56 Supermicro 64GB 5600MHz PC5-44800 Memory represents a class of enterprise-grade DDR5 registered memory modules designed for modern data center and server environments. This category focuses on high-capacity, high-frequency memory solutions that deliver consistent bandwidth, low latency under load, and advanced reliability features. DDR5 server memory has become a foundational component for scalable computing architectures, enabling platforms to address rapidly growing data volumes, increased core counts, and parallel workloads without compromising stability or efficiency.

DDR5 Evolution and PC5-44800 Performance Class

DDR5 also incorporates architectural changes such as dual 32-bit subchannels per DIMM, improving parallelism and reducing access contention. This category benefits from these enhancements by offering more efficient utilization of memory channels, improved command scheduling, and reduced latency during multi-threaded operations.

ECC Registered DIMM Architecture

The MEM-DR564MT-ER56 belongs to the ECC Registered DIMM subcategory, which is essential for mission-critical servers. Error-Correcting Code functionality continuously detects and corrects single-bit memory errors, preserving data integrity across long uptimes. The registered design places a register between the memory controller and DRAM chips, reducing electrical load and enabling higher capacities per channel.

This architecture allows systems to populate more DIMMs while maintaining signal stability at higher frequencies. As a result, ECC RDIMM modules are preferred in enterprise servers, virtualization clusters, and high-availability infrastructures where reliability and scalability are non-negotiable requirements.

MEM-DR564MT-ER56 Specifications in Category Context

Within its category, the MEM-DR564MT-ER56 Supermicro memory module exemplifies balanced specifications that align with modern server platform demands. Its 64GB capacity per module enables dense memory configurations, reducing the number of DIMMs required to reach target capacities and improving airflow within chassis designs.

High Capacity and Density Advantages

A 64GB DDR5 RDIMM supports consolidation strategies by allowing fewer physical modules to deliver large memory pools. This density is particularly beneficial for virtualization hosts, database servers, and in-memory analytics platforms that require substantial RAM allocation per node. High-density modules also simplify memory channel population strategies and reduce power draw per gigabyte compared to smaller-capacity alternatives.

5600MT/s Throughput Characteristics

Operating at 5600MT/s, this memory category addresses the performance requirements of multi-core CPUs with high memory bandwidth demands. Increased throughput ensures that processing cores remain utilized, reducing idle cycles caused by memory wait states. For workloads involving large datasets, sequential streaming, or frequent random access, the PC5-44800 class provides consistent and predictable performance under sustained load.

Power Management and Electrical Efficiency

DDR5 memory integrates on-module power management ICs, shifting voltage regulation from the motherboard to the DIMM itself. This design enhances voltage stability and reduces electrical noise, contributing to improved reliability at higher frequencies. Within this category, lower operating voltage and refined power delivery translate to better energy efficiency and thermal behavior in dense server environments.

Platform Compatibility and Integration

The category targeted by the MEM-DR564MT-ER56 emphasizes compatibility with enterprise server platforms engineered for DDR5 RDIMM support. Memory validation and integration are critical factors in achieving optimal performance and long-term reliability.

Supermicro Server Ecosystem Alignment

Supermicro memory modules are validated across a broad range of Supermicro server and motherboard platforms. This validation ensures electrical compatibility, firmware recognition, and predictable performance characteristics. In this category, platform-level testing reduces the risk of interoperability issues and streamlines deployment for IT teams managing standardized server fleets.

CPU and Chipset Considerations

DDR5 RDIMM memory operates in conjunction with modern server CPUs that feature integrated memory controllers optimized for high-speed operation. This category is aligned with processors that support multiple memory channels and high DIMM capacities per channel, enabling balanced memory bandwidth distribution and efficient scaling as additional modules are installed.

Memory Channel Population Guidelines

Proper channel population is essential to extract maximum performance from DDR5 RDIMM memory. This category supports flexible configurations, but optimal results are achieved by following manufacturer-recommended DIMM placement patterns. Balanced channel utilization ensures uniform access latency and maximizes aggregate bandwidth across the system.

Reliability, Availability, and Serviceability Features

Enterprise memory categories prioritize reliability and uptime. The MEM-DR564MT-ER56 fits into a class of components designed for continuous operation in demanding environments where system stability directly impacts business outcomes.

Advanced Error Correction and Data Integrity

ECC functionality is foundational to this category, correcting single-bit errors in real time and detecting multi-bit faults. Combined with server-level features such as memory mirroring and patrol scrubbing, ECC RDIMM memory contributes to resilient system operation even under heavy workloads and prolonged uptime.

Thermal Monitoring and Cooling Compatibility

DDR5 RDIMM modules incorporate thermal sensors that enable real-time temperature monitoring. This category is designed to operate within defined thermal envelopes, allowing system management software to adjust cooling strategies proactively. Effective thermal management extends component lifespan and maintains consistent performance in high-density deployments.

Manufacturing Quality and Validation

Enterprise memory modules undergo extensive testing, including burn-in, signal integrity validation, and compatibility verification. This category emphasizes strict quality control processes to minimize early-life failures and ensure predictable behavior throughout the product lifecycle.

Workload Optimization Across Use Cases

The MEM-DR564MT-ER56 memory category supports a wide range of workloads, making it a versatile choice for diverse enterprise computing scenarios.

Virtualization and Private Cloud Environments

High-capacity DDR5 RDIMM memory enables dense virtual machine consolidation, allowing hosts to allocate ample RAM to each guest without oversubscription. Improved bandwidth supports simultaneous VM operations, reducing contention and enhancing user experience in private cloud infrastructures.

Database and Analytics Platforms

In-memory databases and analytics engines benefit significantly from high-speed, high-capacity memory. This category supports rapid query execution, faster index traversal, and efficient caching of frequently accessed data, contributing to lower latency and higher transaction throughput.

Edge Computing and Telecommunications

Edge deployments and telecom infrastructure require reliable memory that can operate continuously in varied environmental conditions. This category supports low-latency processing and real-time analytics at the edge, enabling responsive services and efficient data handling closer to end users.

Security and Compliance Considerations

Memory plays a critical role in maintaining data security and regulatory compliance within enterprise systems. The MEM-DR564MT-ER56 category aligns with industry standards that support secure and reliable data handling.

Data Integrity and System Stability

By preventing silent data corruption through ECC mechanisms, this category contributes to accurate data processing and reduces the risk of compromised results. Reliable memory operation is essential for applications subject to regulatory oversight and strict accuracy requirements.

Standards and Certification Alignment

Enterprise DDR5 RDIMM memory adheres to JEDEC specifications and industry standards that ensure interoperability and predictable behavior. Compliance with these standards simplifies procurement, integration, and long-term support across heterogeneous environments.

Scalability and Future-Proofing Strategies

The category represented by the MEM-DR564MT-ER56 supports long-term scalability, allowing organizations to adapt to evolving workload requirements without frequent hardware replacement.

Growing Memory Footprints

As applications continue to demand larger memory allocations, 64GB DDR5 RDIMM modules provide a scalable foundation. Systems can be expanded incrementally by adding modules, preserving investment and extending platform usefulness.

Product Lifecycle and Support

Enterprise memory categories are designed with extended lifecycles in mind, ensuring availability and compatibility over multiple years. This stability supports standardized deployments and simplifies maintenance planning for IT departments.

Deployment and Configuration Best Practices

Successful deployment of DDR5 RDIMM memory depends on adherence to best practices that maximize performance and reliability.

Proper BIOS configuration ensures that memory operates at rated speeds and timings. This category benefits from updated firmware that recognizes DDR5 features, enabling optimal frequency selection and error-handling mechanisms.

Avoiding Mixed Memory Configurations

For consistent performance, it is recommended to populate systems with identical memory modules. This category emphasizes uniformity in capacity, speed, and rank structure to prevent downclocking or compatibility issues.

Validation, Testing, and Burn-In Procedures

Post-installation testing verifies memory stability under load. Enterprise environments often employ stress testing and burn-in processes to identify potential issues early, ensuring reliable operation in production.

Environmental Efficiency and Sustainability

Energy efficiency and sustainability are increasingly important considerations in data center design. DDR5 RDIMM memory contributes to reduced power consumption per unit of performance.

Improved Energy Efficiency Metrics

Lower operating voltage and refined power management enable DDR5 memory to deliver higher bandwidth with improved energy efficiency. This category supports data center initiatives aimed at reducing total cost of ownership and environmental impact.

Sustainable Infrastructure Design

By enabling higher memory density and efficient cooling, enterprise DDR5 memory supports sustainable infrastructure strategies. Reduced component counts and optimized airflow contribute to lower cooling requirements and improved overall efficiency.

Advantages of 64GB DDR5 RDIMM Modules

High-capacity modules reduce complexity, enhance scalability, and support demanding workloads. This category provides a balanced approach to memory expansion, delivering both capacity and speed without compromise.

Supermicro Validation and Enterprise Confidence

Supermicro’s rigorous validation processes ensure that memory modules perform reliably within supported platforms. This category offers enterprise customers confidence in deployment, predictable behavior under load, and alignment with long-term infrastructure strategies.