P14484-001 HPE 10/25GB 2 Ports SFP28 Ethernet Adapter

Comprehensive Product Overview

The HPE P14484-001 dual‑port network adapter delivers versatile high‑speed connectivity, engineered for modern data‑center workloads and virtualized infrastructures. Its OCP 3.0 mezzanine layout, Broadcom processing engine, and extensive protocol support make it a dependable option for scalable enterprise deployments.

General Specifications

• Manufacturer: HPE
• Part Number: P14484-001
• Product Type: 2 Ports Network Adapter

Technical Specifications

• Form Factor: Plug-in Card
• Interface Type: OCP 3.0 Mezzanine
• PCIe Revision: PCIe 3.0
• Port Configuration: Dual SFP28 connectors supporting Gigabit Ethernet, 10Gb Ethernet, and 25Gb Ethernet
• Technology: Wired Ethernet Connectivity
• Supported Protocols: IPv4, IPv6, RoCE v1 and v2, LACP, and more
• Data Link Protocols: Gigabit Ethernet, 10Gb Ethernet, 25Gb Ethernet

Supported Port Speeds

• 1 Gigabit Ethernet
• 10 Gigabit Ethernet
• 25 Gigabit Ethernet (SFP28)

Data Handling & Protocols

• Gigabit, 10GbE, and 25GbE data link protocols
• ROCE v1 and ROCE v2 for low‑latency RDMA operations
• Maximum throughput: 25 Gbps

Performance & Offload Features

• Receive Side Scaling (RSS)
• UEFI boot support
• SR‑IOV virtualization
• VXLAN and NVGRE tunneling
• DPDK acceleration
• VMQ and NetQueue optimization
• Network partitioning (NPAR)

Security & Reliability Enhancements

• Secure Boot
• Firmware Root of Trust
• Audit logging
• Sanitization capabilities

Boot & Deployment Options

• UEFI PXE boot
• Legacy BIOS PXE boot

Compliance & Standards

• The adapter adheres to a wide range of IEEE standards to ensure interoperability and predictable behavior in enterprise networks.

IEEE Conformance

• IEEE 802.1Q
• IEEE 802.3x
• IEEE 802.3ad (LACP)
• IEEE 802.1AS
• IEEE 802.1QBB
• IEEE 802.1QAZ
• IEEE 802.1QAU
• IEEE 802.1QBG

Embedded Processor

• 1 × Broadcom BCM57414

Available Interfaces

• 2 × 1GbE / 10GbE / 25GbE (SFP28)

Compatibility

Rack‑Optimized DL Platforms

• DL110 Gen10 Plus Front Cabled Telco
• DL20 Gen10 Plus
• DL20 Gen10 Plus Base
• DL20 Gen10 Plus Entry
• DL20 Gen10 Plus High Performance
• DL20 Gen10 Plus Performance

Advanced AMD‑Based DL325 Family

• DL325 Gen10 Plus
• DL325 Gen10 Plus All‑NVMe Flash Node for Qumulo
• DL325 Gen10 Plus All‑NVMe Flash Node for Software‑Defined Storage
• DL325 Gen10 Plus for Weka Base Tracking
• DL325 Gen10 Plus for Weka Expansion Tracking
• DL325 Gen10 Plus V2
• DL325 Gen10 Plus V2 Base
• DL325 Gen10 Plus V2 for Weka Base Tracking
• DL325 Gen10 Plus V2 Performance

Additional DL Series Systems

• DL345 Gen10 Plus Base
• DL360 Gen10 Plus
• DL360 Gen10 Plus All‑NVMe Server for Software‑Defined Storage
• DL365 Gen10 Plus
• DL380 Gen10 Plus
• DL380 Gen10 Plus Network Choice
• DL385 Gen10 Plus
• DL385 Gen10 Plus Entry

Supported ML Platforms

• ML30 Gen10 Plus
• ML30 Gen10 Plus Entry
• ML30 Gen10 Plus Performance

Supported XL Nodes

• XL220n Gen10 Plus
• XL225n Gen10 Plus 1U Node
• XL290n Gen10 Plus

HPE P14484-001 BCM57414 Ethernet Network Adapter

The HPE P14484-001 BCM57414 OCP 3.0 Network Adapter is an advanced server networking solution designed to deliver flexible, high-performance Ethernet connectivity for modern enterprise computing environments. Built around the Broadcom BCM57414 controller architecture, this adapter provides dual-port Ethernet capabilities with support for Gigabit Ethernet, 10 Gigabit Ethernet, and 25 Gigabit Ethernet speeds through SFP28 connectivity. It is engineered for organizations requiring scalable network performance, efficient data transfer, and reliable connectivity for demanding workloads such as virtualization, cloud computing, software-defined infrastructure, enterprise applications, and high-density data center operations.

Designed in the Open Compute Project (OCP) 3.0 form factor, the HPE P14484-001 network adapter integrates directly into compatible HPE servers that support OCP 3.0 networking modules. This design approach enables streamlined server configurations, improved airflow management, reduced cable complexity, and easier network expansion compared with traditional PCI Express network adapters. The adapter provides a compact yet powerful networking solution that helps businesses optimize server performance while maintaining flexibility for evolving infrastructure requirements.

Advanced Ethernet Connectivity with Broadcom BCM57414 Technology

The foundation of the HPE P14484-001 adapter is the Broadcom BCM57414 Ethernet controller, a highly capable networking chipset developed for enterprise server environments. The BCM57414 architecture delivers enhanced throughput, efficient packet processing, and intelligent network management features that support demanding applications. By combining hardware acceleration technologies with flexible Ethernet capabilities, the adapter helps reduce CPU overhead and improves overall server efficiency.

The BCM57414 controller supports multiple Ethernet speeds, allowing organizations to deploy a single network adapter platform across different infrastructure environments. Whether a deployment requires standard Gigabit Ethernet connectivity, higher-performance 10Gb Ethernet communication, or advanced 25Gb Ethernet networking, the HPE P14484-001 adapter provides the necessary flexibility. This multi-speed capability allows businesses to upgrade network performance gradually without replacing the entire server networking infrastructure.

Dual-Port SFP28 Interface for Flexible Network Deployment

The HPE P14484-001 BCM57414 OCP 3.0 adapter features two SFP28 ports, providing high-speed optical and direct-attach connectivity options for enterprise networks. SFP28 interfaces are widely adopted in modern data centers because they support 25Gb Ethernet while maintaining compatibility with lower-speed Ethernet standards. This enables organizations to use existing networking investments while preparing for future bandwidth requirements.

The dual-port configuration allows servers to establish multiple network connections for improved redundancy, load balancing, and traffic separation. Administrators can dedicate different ports for application traffic, storage communication, management networks, or virtualization environments. This flexibility makes the adapter suitable for a wide range of server roles, including database servers, virtualization hosts, cloud platforms, and enterprise application systems.

High-Speed 25Gb Ethernet Performance

25Gb Ethernet technology provides a significant improvement over traditional 1Gb and 10Gb networking solutions by increasing bandwidth while maintaining efficient infrastructure requirements. The HPE P14484-001 adapter enables servers to take advantage of faster network communication, supporting applications that require rapid data movement and low latency connectivity. High-performance computing workloads, large-scale virtualization environments, and data-intensive applications can benefit from the increased throughput provided by 25Gb Ethernet.

The adoption of 25Gb Ethernet helps organizations achieve greater network efficiency without requiring the complexity associated with higher-speed technologies. The HPE BCM57414 adapter provides an optimized balance between performance, scalability, and operational efficiency, making it a practical solution for enterprise data centers transitioning toward higher-speed networking environments.

OCP 3.0 Form Factor Design for HPE Server Platforms

The HPE P14484-001 network adapter uses the OCP 3.0 form factor, a standardized modular design created to simplify server networking integration. Unlike conventional expansion cards that occupy PCI Express slots, OCP 3.0 adapters install into dedicated server networking interfaces, allowing improved system design and enhanced flexibility. This architecture provides server manufacturers and administrators with a more efficient method of adding or upgrading network connectivity.

OCP 3.0 technology supports easier maintenance and faster deployment by allowing networking modules to be replaced or upgraded independently from the main server hardware. This modular approach reduces downtime and provides organizations with greater control over their infrastructure lifecycle. The HPE P14484-001 adapter benefits from this design philosophy by delivering enterprise-class networking capabilities in a compact and service-friendly format.

Integration with Enterprise Server Infrastructure

The HPE P14484-001 BCM57414 adapter is designed specifically for integration with compatible HPE server platforms that support OCP 3.0 networking modules. It provides a reliable networking foundation for enterprise environments where consistent performance and compatibility are essential. The adapter works as a critical component within modern server architectures, enabling high-speed communication between servers, switches, storage platforms, and data center systems.

Enterprise organizations depend on stable network connectivity to support mission-critical workloads. The HPE P14484-001 adapter helps meet these requirements by providing dependable Ethernet communication, advanced network management capabilities, and support for multiple operating speeds. Its compatibility with established HPE server ecosystems makes it a valuable option for businesses standardizing their infrastructure with HPE technologies.

Optimized Networking for Virtualized Environments

Virtualization environments require powerful networking solutions capable of handling large volumes of simultaneous traffic from multiple virtual machines. The HPE P14484-001 BCM57414 OCP 3.0 adapter provides the bandwidth and efficiency needed for virtualized server deployments by supporting high-speed Ethernet connectivity and advanced traffic management features.

With dual-port 25Gb Ethernet capability, the adapter enables virtualization hosts to support numerous virtual workloads while maintaining responsive application performance. Network-intensive virtual machines can communicate efficiently, reducing bottlenecks and improving overall infrastructure utilization. The adapter is well suited for environments using virtualization platforms, private clouds, and software-defined data center architectures.

Enhanced Data Center Networking Capabilities

Modern data centers require networking hardware that can support increasing data volumes, growing application demands, and rapidly changing infrastructure requirements. The HPE P14484-001 BCM57414 Ethernet adapter provides the performance characteristics needed for these environments by combining multi-speed Ethernet support, efficient processing, and flexible connectivity options.

The adapter supports advanced networking environments where high throughput and consistent performance are critical. It helps organizations create efficient communication pathways between computing resources, storage systems, and network infrastructure. By enabling faster server-to-server communication and improved bandwidth availability, the adapter contributes to better overall data center efficiency.

Reliable Performance for Enterprise Applications

Business applications such as enterprise databases, analytics platforms, cloud services, and collaboration systems depend on reliable network connectivity. The HPE P14484-001 adapter provides the foundation required for stable and efficient communication between servers and network resources. Its Broadcom BCM57414 controller delivers dependable performance for workloads that require continuous data exchange and consistent network availability.

The adapter is engineered for enterprise environments where reliability, scalability, and performance are essential considerations. By supporting multiple Ethernet speeds and modern networking standards, it allows organizations to adapt their infrastructure according to changing workload requirements.

Network Efficiency and Scalability Features

The HPE P14484-001 BCM57414 OCP 3.0 adapter is designed to improve network efficiency through intelligent hardware capabilities and flexible deployment options. Its support for Gigabit Ethernet, 10Gb Ethernet, and 25Gb Ethernet allows organizations to optimize their network architecture without being restricted to a single performance level.

Scalable networking is increasingly important as businesses expand their digital operations. The ability to upgrade bandwidth and adapt network configurations without replacing major infrastructure components provides long-term value. The HPE P14484-001 adapter supports this approach by offering a versatile networking platform suitable for both current and future enterprise requirements.

Power-Efficient High Performance Networking

Enterprise data centers continuously seek ways to improve performance while controlling power consumption. The HPE P14484-001 adapter is designed to provide efficient Ethernet connectivity while minimizing unnecessary resource usage. Its advanced controller technology helps optimize network processing, reducing the workload placed on server CPUs and improving system efficiency.

Efficient networking contributes to better server utilization, improved operational performance, and reduced infrastructure complexity. The adapter delivers high-speed communication capabilities while supporting the energy-conscious design goals of modern data centers.

Flexible Connectivity for Future-Ready Infrastructure

The ability to support multiple Ethernet speeds makes the HPE P14484-001 BCM57414 adapter a future-ready networking solution. Organizations can deploy the adapter in environments with existing 1Gb or 10Gb Ethernet infrastructure while maintaining a clear upgrade path toward 25Gb Ethernet connectivity.

This flexibility protects technology investments by allowing network environments to evolve gradually. As application requirements increase and bandwidth demands continue to grow, the adapter provides the performance foundation needed to support next-generation enterprise networking strategies.

Enterprise-Class Ethernet Adapter

The HPE P14484-001 BCM57414 OCP 3.0 Gigabit Ethernet, 10Gb Ethernet, and 25Gb Ethernet SFP28 x 2 Network Adapter represents a powerful networking option for organizations seeking reliable and scalable server connectivity. Its combination of Broadcom controller technology, OCP 3.0 modular design, dual SFP28 ports, and multi-speed Ethernet support makes it suitable for modern enterprise infrastructures.

From virtualization platforms and cloud environments to high-performance enterprise applications, the adapter provides the bandwidth, flexibility, and reliability required for advanced networking operations. Its integration with compatible HPE server platforms enables businesses to build efficient, adaptable, and high-performing data center environments capable of meeting current and future connectivity demands.