MS130-24-HW Meraki Cisco 24 Ports Managed Switch

Comprehensive Overview of the Meraki MS130-24-HW

Product Identity & Key Details

• Brand: Cisco Meraki
• Item Code: MS130-24-HW
• Device Category: Fully Managed Network Switch
• Installation Format: Rack-mountable 1U chassis
• Interface Type: Gigabit Ethernet for enterprise use

Port Architecture & Interface Breakdown

• 24 x RJ-45 interfaces supporting 10/100/1000Base-T connectivity
• 4 x Gigabit-capable SFP (1000Base-X) uplink slots for fiber expansion
• 1 x Dedicated RJ-45 LAN port for management access

Transmission & Data Handling

• Switching Bandwidth: 56 Gbps of total throughput capacity
• Architecture: Non-blocking design ensures full data transfer efficiency
• Traffic Prioritization: Quality of Service (QoS) support included

Advanced Management & Monitoring Capabilities

• Supports SNMP, Syslog, IPv4/IPv6, and DHCP-based protocols
• Centralized configuration via cloud-based dashboard
• Features like ZTP (Zero-Touch Provisioning) reduce setup time

Security Protocols & Access Control

• IEEE 802.1X port-based network access control
• DHCP Snooping & Relay for enhanced network protection
• 802.1Q VLAN tagging support for isolated traffic flow

Status & Diagnostics Indicators

• Real-time LEDs for power status, port activity, and overall switch health

Connectivity & Expansion Features

• Flexible port combinations for scalable infrastructure
• Layered compatibility with copper and fiber interfaces
• Dedicated management port enables out-of-band access

Power Efficiency & Electrical Specifications

• Power Module: Integrated internal PSU
• Input Voltage Range: 100-240V AC, 50-60Hz
• Energy Usage (Idle): Approx. 15W power draw when idle
• Amperage: 1.5A current requirement

Standards Compliance & Compatibility

• Conforms to IEEE 802.1Q VLAN standard
• Adheres to IEEE 802.1X authentication protocol
• Designed to meet modern enterprise-grade network environments

Meraki MS130-24-HW: Advanced Networking with Cloud-Managed Simplicity

The Meraki MS130-24-HW is a next-generation 24-port manageable gigabit Ethernet switch designed to deliver top-tier Layer 2 networking functionality with the simplicity of centralized cloud management. Ideal for growing enterprises, distributed branch offices, educational campuses, and high-efficiency environments, this switch embodies the fusion of performance, reliability, and manageability through Cisco Meraki's intuitive dashboard. Its ability to support 10/100/1000BASE-T and 1000BASE-X ensures smooth operation across both twisted-pair and optical fiber infrastructures.

Comprehensive 24-Port Configuration for High-Volume Connectivity

Equipped with 24 high-performance Gigabit Ethernet ports, the MS130-24-HW enables rapid and seamless connectivity to workstations, servers, printers, IP phones, and wireless access points. This configuration is perfect for medium to large network environments where efficient bandwidth utilization and minimal latency are essential.

• Supports auto-negotiation for optimal speed detection
• Backed by Layer 2 switching features for streamlined traffic handling
• Ideal for edge deployments or core networking roles in small-scale networks

Optimized Port Architecture

The port layout ensures minimal cable clutter and provides an intuitive interface for network administrators. Front-facing port design makes patching and repatching easier during installations or upgrades, contributing to reduced downtime and faster troubleshooting.

Advanced Twisted Pair and Optical Fiber Integration

The MS130-24-HW Ethernet switch is designed with dual support for twisted pair and optical fiber cabling. Whether you're expanding fiber infrastructure or maintaining compatibility with copper networks, this model bridges the two worlds efficiently.

• 10/100/1000BASE-T support for legacy and modern devices
• 1000BASE-X SFP slots allow fiber uplinks with enhanced performance
• Flexible media support enhances deployment options

Four Dedicated SFP Slots for High-Bandwidth Fiber Uplinks

To support uplinks and inter-switch stacking, the MS130-24-HW integrates four dedicated Small Form-Factor Pluggable (SFP) slots. These SFP interfaces offer superior bandwidth scalability and long-distance data transmission, ideal for connecting access layers to aggregation or core network tiers.

Modular Fiber Expansion

The SFP slots provide modularity to choose between 1G and 10G optical transceivers, granting flexibility to network architects designing scalable infrastructure. With support for both single-mode and multi-mode fiber modules, the MS130-24-HW adapts to diverse operational scenarios.

Enhanced Fiber Channel Isolation

By separating copper and fiber paths, the switch enhances signal integrity and mitigates interference. This ensures more reliable, longer-distance fiber communication, particularly critical in campus-wide or cross-building networking applications.

Layer 2 Managed Switching: Control, Visibility, and Security

The MS130-24-HW offers robust Layer 2 switching capabilities that include VLAN segmentation, port mirroring, link aggregation, STP enhancements, and MAC-based access controls. These functionalities empower IT teams to build secure, efficient, and fault-tolerant network topologies.

Virtual LAN (VLAN) Support

VLAN support is central to separating traffic by department, function, or user groups—providing a logical segmentation layer for improved security and bandwidth optimization. Configure static or dynamic VLANs through the intuitive Meraki Dashboard or API-driven automation scripts.

Spanning Tree Protocol (STP) Enhancements

Deploy redundant paths without creating loops using RSTP and MSTP support. The MS130-24-HW enhances network resilience and convergence time, ensuring faster recovery from link failures.

Link Aggregation and Port Trunking

Combine multiple ports for redundancy and load balancing using Link Aggregation Control Protocol (LACP). Port trunking allows greater throughput and eliminates bottlenecks in network backhaul links.

Cloud-Based Network Management with Cisco Meraki Dashboard

Unlike traditional switches that rely on local CLI or on-premise tools, the MS130-24-HW integrates with the Cisco Meraki cloud-based dashboard, providing centralized, real-time visibility and control from anywhere in the world.

Zero-Touch Provisioning

Unbox and connect—the Meraki MS130-24-HW can be fully configured remotely before it even arrives at the site. Ideal for multi-location rollouts, the dashboard enables rapid provisioning and bulk policy updates with minimal human intervention.

Network-Wide Troubleshooting

Diagnose port usage, bandwidth trends, traffic spikes, and potential misconfigurations instantly. Remote packet captures, cable testing tools, and port status indicators provide IT teams with full-stack visibility.

Security Policies and Compliance

Enforce Layer 2 security policies with port isolation, MAC whitelisting, and DHCP snooping. Ensure compliance with organizational or industry standards through intuitive reporting and auditing tools available in the dashboard interface.

Rack-Mountable Form Factor for Simplified Installation

The MS130-24-HW is engineered in a standard 1U rack-mountable chassis, enabling seamless integration into server rooms, network closets, and enterprise-grade racks. Its compact build allows stacking multiple units in limited rack space without sacrificing performance or accessibility.

Silent and Fanless Design Option

Ideal for noise-sensitive environments like schools, libraries, or open-plan offices, the fanless version of the MS130-24-HW delivers quiet operation while maintaining optimal thermal efficiency through passive cooling architecture.

Durable Construction for Enterprise Use

Built with industrial-grade components, this switch operates reliably in various environments. Its robust housing, electrostatic discharge protection, and thermally optimized components ensure long-term reliability and uptime.

Energy Efficiency and Environmental Adaptability

Energy-saving technology is baked into the hardware of the MS130-24-HW. Intelligent port power downs, energy-efficient Ethernet (EEE), and dynamic link speed negotiation reduce energy consumption without impacting throughput.

Compliance with Global Efficiency Standards

The switch meets a wide range of international energy certifications, including RoHS, WEEE, and Energy Star standards, ensuring eco-friendliness and regulatory compliance across different regions.

Adaptive Thermal Monitoring

Temperature sensors automatically adjust operation to prevent overheating and protect internal circuitry. These adaptive controls extend product life while reducing the need for external cooling interventions.

Ideal Use Cases for the Meraki MS130-24-HW Ethernet Switch

The MS130-24-HW is tailored to suit a variety of deployment scenarios where consistent performance, simplified management, and high port density are essential. It fits seamlessly into:

• Educational institutions requiring multiple device connections in classrooms or labs
• Branch offices needing scalable uplinks to headquarters
• Healthcare and hospitality sectors requiring secure, segmented VLANs
• Retail environments where cloud-managed access simplifies multi-location control

Edge Access Layer Deployment

As an access layer switch, the MS130-24-HW connects end-user devices to the network core, providing them with dedicated Gigabit throughput, segmented VLAN access, and centralized traffic shaping capabilities.

Aggregation Role in Small Networks

In smaller or mid-tier deployments, this switch can also act as an aggregation switch, combining traffic from multiple access switches before forwarding it to core routers or firewalls, utilizing its high-bandwidth SFP uplinks for smooth data flow.

Integration with Meraki Ecosystem and API Automation

Being part of the Cisco Meraki portfolio, the MS130-24-HW integrates natively with other Meraki networking products—including MX security appliances, MR wireless access points, and Meraki Systems Manager for endpoint control.

Unified Policy Enforcement Across Devices

Administrators can define unified QoS, security, and VLAN rules that apply consistently across wired and wireless infrastructure—maximizing security while minimizing complexity.

API-Driven Network Automation

Utilize RESTful APIs provided by the Meraki Dashboard to automate configuration, monitor switch health, pull port statistics, and conduct firmware rollouts at scale.

Webhooks and Event-Driven Alerts

Real-time alerting through Webhooks or email notifications allows administrators to respond immediately to unexpected downtime, unauthorized device access, or bandwidth overuse.